Create pin.py

diff --git a/src/adafruit_blinka/microcontroller/rockchip/rk3568b2/pin.py b/src/adafruit_blinka/microcontroller/rockchip/rk3568b2/pin.py
new file mode 100644 (file)
index 0000000..16b3767
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/rockchip/rk3568b2/pin.py
@@ -0,0 +1,66 @@
+"""A Pin class for use with Rockchip RK3568B2."""
+
+from adafruit_blinka.microcontroller.generic_linux.sysfs_pin import Pin
+
+GPIO3C_6 = pin(118)
+GPIO3C_7 = pin(119)
+GPIO3D_0 = pin(120)
+GPIO3D_1 = pin(121)
+GPIO3D_2 = pin(122)
+GPIO3D_3 = pin(123)
+GPIO3D_4 = pin(124)
+GPIO3D_5 = pin(125)
+GPIO3D_6 = pin(126)
+GPIO3D_7 = pin(127)
+GPIO3B_2 = pin(106)
+GPIO3B_5 = pin(109)
+GPIO3B_6 = pin(110)
+GPIO0B_3 = pin(11)
+GPIO0B_4 = pin(12)
+GPIO0B_5 = pin(13)
+GPIO0B_6 = pin(14)
+GPIO0C_0 = pin(16)
+GPIO0C_1 = pin(17)
+GPIO2D_0 = pin(88)
+GPIO2D_1 = pin(89)
+GPIO2D_2 = pin(90)
+GPIO2D_3 = pin(91)
+GPIO4B_6 = pin(142)
+GPIO4C_1 = pin(145)
+ADC_IN0 = 1
+
+# I2C
+
+# SPI
+SPI0_CS = GPIO2D_2
+SPI0_SCLK = GPIO2D_3
+SPI0_MISO = GPIO2D_0
+SPI0_MOSI = GPIO2D_1
+
+
+# UART
+UART0_TX = GPIO4_C4
+UART0_RX = GPIO4_C3
+
+# PWM
+PWM0 = GPIO4_C2
+PWM1 = GPIO4_C6
+
+# ordered as i2cId, SCL, SDA
+i2cPorts = (
+    (0, I2C2_SCL, I2C2_SDA),
+    (1, I2C6_SCL, I2C6_SDA),
+    (7, I2C7_SCL, I2C7_SDA),
+)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),)
+
+# SysFS pwm outputs, pwm channel and pin in first tuple
+pwmOuts = (
+    ((0, 0), PWM0),
+    ((1, 0), PWM1),
+)
+
+# SysFS analog inputs, Ordered as analog analogInId, device, and channel
+analogIns = ((ADC_IN0, 0, 0),)