Update in line with latest Adafruit_Blinka repo

diff --git a/src/adafruit_blinka/board/linksprite/__init__.py b/src/adafruit_blinka/board/linksprite/__init__.py
new file mode 100644 (file)
index 0000000..333c1b1
--- /dev/null
+++ b/src/adafruit_blinka/board/linksprite/__init__.py
@@ -0,0 +1 @@
+"""Boards definition from Linksprite Pcduino based boards"""

diff --git a/src/adafruit_blinka/board/linksprite/pcduino2.py b/src/adafruit_blinka/board/linksprite/pcduino2.py
new file mode 100644 (file)
index 0000000..43bb3bb
--- /dev/null
+++ b/src/adafruit_blinka/board/linksprite/pcduino2.py
@@ -0,0 +1,67 @@
+"""Pin definitions for the Pcduino2."""
+from adafruit_blinka.microcontroller.allwinner.a20 import pin
+
+# J11 Header
+D0 = pin.PI19
+D1 = pin.PI18
+D2 = pin.PH7
+D3 = pin.PH6
+D4 = pin.PH8
+D5 = pin.PB2
+D6 = pin.PI3
+D7 = pin.PH9
+
+# J8 Header
+D8 = pin.PH10
+D9 = pin.PH5
+D10 = pin.PI10
+D11 = pin.PI12
+D12 = pin.PI13
+D13 = pin.PI11
+SDA = pin.PB21
+SCL = pin.PB20
+
+# J9 Header
+# A0 & A1 are LRADC pins with only 6-bit resolution and unlike other pins are only limited to 2v
+A2 = pin.XP_TP
+A3 = pin.XN_TP
+A4 = pin.YP_TP
+A5 = pin.YN_TP
+
+# P7 Header
+SCLK = D13
+SCK = SCLK
+MOSI = D11
+MISO = D12
+CS = D10
+
+
+# P6 Header
+D22 = pin.PC20
+SCLK2 = D22
+SCK2 = SCLK2
+D23 = pin.PC21
+MOSI2 = D23
+D20 = pin.PC22
+MISO2 = D20
+D21 = pin.PC19
+CS2 = D21
+
+# P10 Header
+D14 = pin.PH11
+D15 = pin.PH12
+D16 = pin.PH13
+D17 = pin.PH14
+
+UART2_TX = D1
+UART2_RX = D0
+UART5_TX = D3
+UART5_RX = D2
+
+PWM0 = D5
+PWM1 = D6
+
+# Misc
+BACK_SW = pin.PH17  # Three buttons featured on the board
+HOME_SW = pin.PH18
+MENU_SW = pin.PH19

diff --git a/src/adafruit_blinka/board/linksprite/pcduino3.py b/src/adafruit_blinka/board/linksprite/pcduino3.py
new file mode 100644 (file)
index 0000000..e7a7684
--- /dev/null
+++ b/src/adafruit_blinka/board/linksprite/pcduino3.py
@@ -0,0 +1,70 @@
+"""Pin definitions for the Pcduino3."""
+from adafruit_blinka.microcontroller.allwinner.a20 import pin
+
+# Pin wise this is the same as the Pcduino2 but features a daul core A20
+# # rather than a single core A10
+
+# J11 Header
+D0 = pin.PI19
+D1 = pin.PI18
+D2 = pin.PH7
+D3 = pin.PH6
+D4 = pin.PH8
+D5 = pin.PB2
+D6 = pin.PI3
+D7 = pin.PH9
+
+# J8 Header
+D8 = pin.PH10
+D9 = pin.PH5
+D10 = pin.PI10
+D11 = pin.PI12
+D12 = pin.PI13
+D13 = pin.PI11
+SDA = pin.PB21
+SCL = pin.PB20
+
+# J9 Header
+# A0 & A1 are LRADC pins with only 6-bit resolution and unlike other pins are only limited to 2v
+A2 = pin.XP_TP
+A3 = pin.XN_TP
+A4 = pin.YP_TP
+A5 = pin.YN_TP
+
+# P7 Header
+SCLK = D13
+SCK = SCLK
+MOSI = D11
+MISO = D12
+CS = D10
+
+
+# P6 Header
+D22 = pin.PC20
+SCLK2 = D22
+SCK2 = SCLK2
+D23 = pin.PC21
+MOSI2 = D23
+D20 = pin.PC22
+MISO2 = D20
+D21 = pin.PC19
+CS2 = D21
+
+# P10 Header
+D14 = pin.PH11
+D15 = pin.PH12
+D16 = pin.PH13
+D17 = pin.PH14
+
+UART2_TX = D1
+UART2_RX = D0
+UART5_TX = D3
+UART5_RX = D2
+
+PWM0 = D5
+PWM1 = D6
+
+# Misc
+BACK_SW = pin.PH17  # Three buttons featured on the board
+HOME_SW = pin.PH18
+MENU_SW = pin.PH19

diff --git a/src/analogio.py b/src/analogio.py
index 58381b008357c1a8f17ec8341e01fa58ae57ec0a..e3ebb39d82bd8d63d591dfa79110354f664646d3 100644 (file)
--- a/src/analogio.py
+++ b/src/analogio.py
@@ -39,6 +39,10 @@ elif detector.chip.IMX6ULL:
     from adafruit_blinka.microcontroller.generic_linux.sysfs_analogin import AnalogIn
 elif detector.chip.STM32MP157:
     from adafruit_blinka.microcontroller.generic_linux.sysfs_analogin import AnalogIn
+elif detector.chip.A10:
+    from adafruit_blinka.microcontroller.generic_linux.sysfs_analogin import AnalogIn
+elif detector.chip.A20:
+    from adafruit_blinka.microcontroller.generic_linux.sysfs_analogin import AnalogIn
 elif "sphinx" in sys.modules:
     pass
 elif detector.board.pico_u2if:

diff --git a/src/board.py b/src/board.py
index b7775d734074d16fadb051078acfc37d01561346..cfaad6cecab5bf664aa0b979cbbc5885be69f77d 100644 (file)
--- a/src/board.py
+++ b/src/board.py
@@ -226,6 +226,12 @@ elif board_id == ap_board.PINE64:
 elif board_id == ap_board.PINEH64:
     from adafruit_blinka.board.pineH64 import *
 
+elif board_id == ap_board.PCDUINO2:
+    from adafruit_blinka.board.linksprite.pcduino2 import *
+
+elif board_id == ap_board.PCDUINO3:
+    from adafruit_blinka.board.linksprite.pcduino3 import *
+
 elif board_id == ap_board.SOPINE:
     from adafruit_blinka.board.soPine import *
 

diff --git a/src/digitalio.py b/src/digitalio.py
index 62e61a47429eb850eeef9291f9a9d6e95d28b0b9..2c0b5f3e1dea2001893228db7b6dda09e3f73167 100644 (file)
--- a/src/digitalio.py
+++ b/src/digitalio.py
@@ -25,6 +25,10 @@ elif detector.chip.JH71x0:
     from adafruit_blinka.microcontroller.starfive.JH71x0.pin import Pin
 elif detector.chip.DRA74X:
     from adafruit_blinka.microcontroller.dra74x.pin import Pin
+elif detector.chip.SUN4I:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import Pin
+elif detector.chip.SUN7I:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import Pin
 elif detector.chip.SUN8I:
     from adafruit_blinka.microcontroller.allwinner.h3.pin import Pin
 elif detector.chip.SAMA5:
@@ -59,6 +63,10 @@ elif detector.chip.IMX6ULL:
     from adafruit_blinka.microcontroller.nxp_imx6ull.pin import Pin
 elif detector.chip.HFU540:
     from adafruit_blinka.microcontroller.hfu540.pin import Pin
+elif detector.chip.A10:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import Pin
+elif detector.chip.A30:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import Pin
 elif detector.chip.A64:
     from adafruit_blinka.microcontroller.allwinner.a64.pin import Pin
 elif detector.chip.A33:

diff --git a/src/microcontroller/__init__.py b/src/microcontroller/__init__.py
index 37cd3a601ff4fba83f98909307bff113bba2a402..e8d85cd456d768355643bc9f77ef7fabeecddd51 100644 (file)
--- a/src/microcontroller/__init__.py
+++ b/src/microcontroller/__init__.py
@@ -48,6 +48,10 @@ elif chip_id == ap_chip.AM65XX:
     from adafruit_blinka.microcontroller.am65xx import *
 elif chip_id == ap_chip.JH71x0:
     from adafruit_blinka.microcontroller.starfive.JH71x0 import *
+elif chip_id == ap_chip.SUN4I:
+    from adafruit_blinka.microcontroller.allwinner.a20 import *
+elif chip_id == ap_chip.SUN7I:
+    from adafruit_blinka.microcontroller.allwinner.a20 import *
 elif chip_id == ap_chip.SUN8I:
     from adafruit_blinka.microcontroller.allwinner.h3 import *
 elif chip_id == ap_chip.H5:
@@ -82,6 +86,10 @@ elif chip_id == ap_chip.EXYNOS5422:
     from adafruit_blinka.microcontroller.samsung.exynos5422 import *
 elif chip_id == ap_chip.APQ8016:
     from adafruit_blinka.microcontroller.snapdragon.apq8016 import *
+elif chip_id == ap_chip.A10:
+    from adafruit_blinka.microcontroller.allwinner.a20 import *
+elif chip_id == ap_chip.A20:
+    from adafruit_blinka.microcontroller.allwinner.a20 import *
 elif chip_id == ap_chip.A64:
     from adafruit_blinka.microcontroller.allwinner.a64 import *
 elif chip_id == ap_chip.A33:

diff --git a/src/microcontroller/pin.py b/src/microcontroller/pin.py
index 2fe19a628b51e7fa8ffa55798902d0b45add8ef0..abb665da199b36aad3d4b1bf40d361de90bf3249 100644 (file)
--- a/src/microcontroller/pin.py
+++ b/src/microcontroller/pin.py
@@ -33,6 +33,10 @@ elif chip_id == ap_chip.AM65XX:
     from adafruit_blinka.microcontroller.am65xx.pin import *
 elif chip_id == ap_chip.JH71x0:
     from adafruit_blinka.microcontroller.starfive.JH71x0.pin import *
+elif chip_id == ap_chip.SUN4I:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import *
+elif chip_id == ap_chip.SUN7I:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import *
 elif chip_id == ap_chip.SUN8I:
     from adafruit_blinka.microcontroller.allwinner.h3.pin import *
 elif chip_id == ap_chip.H3:
@@ -85,6 +89,10 @@ elif chip_id == ap_chip.LPC4330:
     from adafruit_blinka.microcontroller.nxp_lpc4330.pin import *
 elif chip_id == ap_chip.MCP2221:
     from adafruit_blinka.microcontroller.mcp2221.pin import *
+elif chip_id == ap_chip.A10:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import *
+elif chip_id == ap_chip.A20:
+    from adafruit_blinka.microcontroller.allwinner.a20.pin import *
 elif chip_id == ap_chip.A64:
     from adafruit_blinka.microcontroller.allwinner.a64.pin import *
 elif chip_id == ap_chip.A33:

diff --git a/src/pwmio.py b/src/pwmio.py
index b37549f2af946e68f6216bc8ad7933bff383aed0..9ded9fd43faa956a746ae395037b8f6648d0a443 100644 (file)
--- a/src/pwmio.py
+++ b/src/pwmio.py
@@ -22,6 +22,8 @@ elif detector.board.any_coral_board:
     from adafruit_blinka.microcontroller.generic_linux.sysfs_pwmout import PWMOut
 elif detector.board.any_giant_board:
     from adafruit_blinka.microcontroller.generic_linux.sysfs_pwmout import PWMOut
+elif detector.board.any_pcduino_board:
+    from adafruit_blinka.microcontroller.generic_linux.sysfs_pwmout import PWMOut
 elif detector.board.any_beaglebone:
     from adafruit_blinka.microcontroller.am335x.sysfs_pwmout import PWMOut
 elif detector.board.any_lemaker: