Second round of formatting checks

diff --git a/src/adafruit_blinka/board/linksprite/pcduino2.py b/src/adafruit_blinka/board/linksprite/pcduino2.py
index 5d93791312a219142910e263a658a72db70f12d1..9bf5878ef92f39ae72e17e6ce0e65eb89fafa765 100644 (file)
--- a/src/adafruit_blinka/board/linksprite/pcduino2.py
+++ b/src/adafruit_blinka/board/linksprite/pcduino2.py
@@ -1,7 +1,7 @@
 """Pin definitions for the Pcduino2."""
 from adafruit_blinka.microcontroller.allwinner.a10 import pin
 
-#J11 Header
+# J11 Header
 D0 = pin.PI19
 D1 = pin.PI18
 D2 = pin.PH7
@@ -11,7 +11,7 @@ D5 = pin.PB2
 D6 = pin.PI3
 D7 = pin.PH9
 
-#J8 Header
+# J8 Header
 D8 = pin.PH10
 D9 = pin.PH5
 D10 = pin.PI10
@@ -21,14 +21,14 @@ D13 = pin.PI11
 SDA = pin.PB21
 SCL = pin.PB20
 
-#J9 Header
-#A0 & A1 are LRADC pins with only 6-bit resolution and unlike other pins are only limited to 2v
+# J9 Header
+# A0 & A1 are LRADC pins with only 6-bit resolution and unlike other pins are only limited to 2v
 A2 = pin.XP_TP
 A3 = pin.XN_TP
 A4 = pin.YP_TP
 A5 = pin.YN_TP
 
-#P7 Header
+# P7 Header
 SCLK = D13
 SCK = SCLK
 MOSI = D11
@@ -36,7 +36,7 @@ MISO = D12
 CS = D10
 
 
-#P6 Header
+# P6 Header
 D22 = pin.PC20
 SCLK2 = D22
 SCK2 = SCLK2
@@ -47,7 +47,7 @@ MISO2 = D20
 D21 = pin.PC19
 CS2 = D21
 
-#P10 Header
+# P10 Header
 D14 = pin.PH11
 D15 = pin.PH12
 D16 = pin.PH13
@@ -61,7 +61,7 @@ UART5_RX = D2
 PWM0 = D5
 PWM1 = D6
 
-#Misc
-BACK_SW = pin.PH17 #Three buttons featured on the board
+# Misc
+BACK_SW = pin.PH17  # Three buttons featured on the board
 HOME_SW = pin.PH18
 MENU_SW = pin.PH19

diff --git a/src/adafruit_blinka/board/linksprite/pcduino3.py b/src/adafruit_blinka/board/linksprite/pcduino3.py
index f7b05d836784f65c7196bb77a6f0837713b66793..6e11d72391df7b624d6927d8b3f082d812d86667 100644 (file)
--- a/src/adafruit_blinka/board/linksprite/pcduino3.py
+++ b/src/adafruit_blinka/board/linksprite/pcduino3.py
@@ -65,6 +65,6 @@ PWM0 = D5
 PWM1 = D6
 
 # Misc
-BACK_SW = pin.PH17 #Three buttons featured on the board
+BACK_SW = pin.PH17  # Three buttons featured on the board
 HOME_SW = pin.PH18
 MENU_SW = pin.PH19

diff --git a/src/adafruit_blinka/microcontroller/allwinner/a10/pin.py b/src/adafruit_blinka/microcontroller/allwinner/a10/pin.py
index c24a143e95dbad357956dc821c1ed9d9eceae9cb..cc7e3ae4b3860994b50665e9425e3b62d1fa6103 100644 (file)
--- a/src/adafruit_blinka/microcontroller/allwinner/a10/pin.py
+++ b/src/adafruit_blinka/microcontroller/allwinner/a10/pin.py
@@ -1,26 +1,26 @@
 """Allwinner A10 pin names"""
 from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
 
-PB2 = Pin(34) # PB2/PWM0
+PB2 = Pin(34)  # PB2/PWM0
 PWM0 = PB2
-PB20 = Pin(52) # PB20/TWI2_SDL
+PB20 = Pin(52)  # PB20/TWI2_SDL
 TWI2_SCL = PB20
-PB21 = Pin(53) # PB20/TWI2_SDA
+PB21 = Pin(53)  # PB20/TWI2_SDA
 TWI2_SDA = PB21
 
-PC19 = Pin(83) # PC19/SPI2_CS
+PC19 = Pin(83)  # PC19/SPI2_CS
 SPI2_CS = PC19
-PC20 = Pin(84) # PC20/SPI2_SCLK
+PC20 = Pin(84)  # PC20/SPI2_SCLK
 SPI2_SCLK = PC20
-PC21 = Pin(85) # PC21/SPI2_MOSI
+PC21 = Pin(85)  # PC21/SPI2_MOSI
 SPI2_MOSI = PC21
-PC22 = Pin(86) # PC22/SPI2_MISO
+PC22 = Pin(86)  # PC22/SPI2_MISO
 SPI2_MISO = PC22
 
 PH5 = Pin(229)
-PH6 = Pin(230) # PH6/UART5_TX
+PH6 = Pin(230)  # PH6/UART5_TX
 UART5_TX = PH6
-PH7 = Pin(231) # PH7/UART5_RX
+PH7 = Pin(231)  # PH7/UART5_RX
 UART5_RX = PH7
 PH8 = Pin(232)
 PH9 = Pin(233)
@@ -35,11 +35,11 @@ PH17 = Pin(241)
 PH18 = Pin(242)
 PH19 = Pin(243)
 
-PI3 = Pin(259) # PI3/PWM1
+PI3 = Pin(259)  # PI3/PWM1
 PWM1 = PI3
-PI10 = Pin(266) # PI10/SPI0_CS/UART5_TX
+PI10 = Pin(266)  # PI10/SPI0_CS/UART5_TX
 SPI0_CS = PI10
-PI11 = Pin(267) # PI11/SPI0_SCLK/UART5_RX
+PI11 = Pin(267)  # PI11/SPI0_SCLK/UART5_RX
 SPI0_SCLK = PI11
 PI12 = Pin(268)
 SPI0_MOSI = PI12
@@ -47,22 +47,23 @@ UART6_TX = PI12
 PI13 = Pin(269)
 SPI0_MISO = PI13
 UART6_RX = PI13
-PI18 = Pin(274) # PI18/UART2_TX
+PI18 = Pin(274)  # PI18/UART2_TX
 UART2_TX = PI18
-PI19 = Pin(275) # PI19/UART2_RX
+PI19 = Pin(275)  # PI19/UART2_RX
 UART2_RX = PI19
 
-XP_TP = 1 # Allwinner touch panel controller which can be configured to operate
-XN_TP = 2 # as four seperate adc chanels, providing 12-bit resolution.
+XP_TP = 1  # Allwinner touch panel controller which can be configured to operate
+XN_TP = 2  # as four seperate adc chanels, providing 12-bit resolution.
 YP_TP = 3
 YN_TP = 4
 
 # Ordered as i2cId, SCL, SDA
-i2cPorts =((2, TWI2_SCL, TWI2_SDA),)
+i2cPorts = ((2, TWI2_SCL, TWI2_SDA),)
 
 # Ordered as spiId, clkId, mosiId, misoId
-spiPorts =((0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
-           (2, SPI2_SCLK, SPI2_MOSI, SPI2_MISO),
+spiPorts = (
+    (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
+    (2, SPI2_SCLK, SPI2_MOSI, SPI2_MISO),
 )
 
 # ordered as uartId, txId, rxId
@@ -72,13 +73,15 @@ uartPorts = (
     (6, UART6_TX, UART6_RX),
 )
 # sysFs pwm outputs, pwm channel and pin first tuple
-pwmOuts = (((0,0), PWM0),
-           ((0,1), PWM1),
+pwmOuts = (
+    ((0, 0), PWM0),
+    ((0, 1), PWM1),
 )
 
-#sysFs analog inputs, Ordered as analogInId, device, and channel
-analogIns = ((XP_TP, 0, 0),
-             (XN_TP, 0, 1),
-             (YP_TP, 0, 2),
-             (YN_TP, 0, 3),
+# sysFs analog inputs, Ordered as analogInId, device, and channel
+analogIns = (
+    (XP_TP, 0, 0),
+    (XN_TP, 0, 1),
+    (YP_TP, 0, 2),
+    (YN_TP, 0, 3),
 )