Add files via upload

diff --git a/src/adafruit_blinka/microcontroller/allwinner/h5/__init__.py b/src/adafruit_blinka/microcontroller/allwinner/h5/__init__.py
new file mode 100644 (file)
index 0000000..d5658ba
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/allwinner/h5/__init__.py
@@ -0,0 +1 @@
+"""Definition for the AllWinner H5 chip"""

diff --git a/src/adafruit_blinka/microcontroller/allwinner/h5/pin.py b/src/adafruit_blinka/microcontroller/allwinner/h5/pin.py
new file mode 100644 (file)
index 0000000..598b6fa
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/allwinner/h5/pin.py
@@ -0,0 +1,68 @@
+"""Allwinner H5 pin names"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+PA0 = Pin((1, 0))
+UART2_TX = PA0
+PA1 = Pin((1, 1))
+UART2_RX = PA1
+PA2 = Pin((1, 2))
+PA3 = Pin((1, 3))
+PA6 = Pin((1, 6))
+PA7 = Pin((1, 7))
+PA8 = Pin((1, 8))
+PA9 = Pin((1, 9))
+PA10 = Pin((1, 10))
+PA11 = Pin((1, 11))
+TWI0_SCL = PA11
+PA12 = Pin((1, 12))
+TWI0_SDA = PA12
+PA13 = Pin((1, 13))
+UART3_TX = PA13
+PA14 = Pin((1, 14))
+UART3_RX = PA14
+SPI1_SCLK = PA14
+PA15 = Pin((1, 15))
+SPI1_MOSI = PA15
+PA16 = Pin((1, 16))
+SPI1_MISO = PA16
+PA17 = Pin((1, 17))
+PA18 = Pin((1, 18))
+PA19 = Pin((1, 19))
+PA20 = Pin((1, 20))
+PA21 = Pin((1, 21))
+
+PC0 = Pin((1, 64))
+SPI0_MOSI = PC0
+PC1 = Pin((1, 65))
+SPI0_MISO = PC1
+PC2 = Pin((1, 66))
+SPI0_SCLK = PC2
+PC3 = Pin((1, 67))
+SPI0_CS = PC3
+PC4 = Pin((1, 68))
+PC7 = Pin((1, 71))
+
+PD14 = Pin((1, 110))
+
+PG6 = Pin((1, 198))
+UART1_TX = PG6
+PG7 = Pin((1, 199))
+UART1_RX = PG7
+PG8 = Pin((1, 200))
+PG9 = Pin((1, 201))
+PG10 = Pin((1, 202))
+PG11 = Pin((1, 203))
+PG12 = Pin((1, 204))
+PG13 = Pin((1, 205))
+
+PL0 = Pin((0, 0))
+PL1 = Pin((0, 1))
+
+i2cPorts = ((0, TWI0_SCL, TWI0_SDA),)
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = (
+    (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
+    (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),
+)
+# ordered as uartId, txId, rxId
+uartPorts = ((3, UART3_TX, UART3_RX),)