ODROID-M1/S: Fix the i2c and serial pins

to support new dtbo and to unify with other odroid boards

Signed-off-by: Steve Jeong <steve@how2flow.net>

diff --git a/src/adafruit_blinka/board/hardkernel/odroidm1.py b/src/adafruit_blinka/board/hardkernel/odroidm1.py
index 7093fc4113b5f96c1059c08da94e5cd6e351f4b8..844fc47ca412a95450e5b9b99dc4c0ae4335b04a 100644 (file)
--- a/src/adafruit_blinka/board/hardkernel/odroidm1.py
+++ b/src/adafruit_blinka/board/hardkernel/odroidm1.py
@@ -31,18 +31,18 @@ D31 = pin.GPIO4B_6
 D33 = pin.GPIO0B_5
 D35 = pin.GPIO3D_5
 
-SDA = D27
-SCL = D28
+SDA = D3
+SCL = D5
 
 SCLK = D23
 MOSI = D19
 MISO = D21
 CS = D24
 
-UART0_TX = D13
-UART0_RX = D11
-UART1_TX = D8
-UART1_RX = D10
+UART0_TX = D8
+UART0_RX = D10
+UART1_TX = D13
+UART1_RX = D11
 
 UART1_CTS = D29
 UART1_RTS = D31

diff --git a/src/adafruit_blinka/board/hardkernel/odroidm1s.py b/src/adafruit_blinka/board/hardkernel/odroidm1s.py
index 4b5d6007b3cd23a312284d4bfbcfacd4ed1cff1d..4e17dcfe3f567c756f32fb50fe4686fa290bbe3a 100644 (file)
--- a/src/adafruit_blinka/board/hardkernel/odroidm1s.py
+++ b/src/adafruit_blinka/board/hardkernel/odroidm1s.py
@@ -37,18 +37,18 @@ EXT_D12 = pin.GPIO3_C5
 EXT_D13 = pin.GPIO3_B3
 EXT_D14 = pin.GPIO3_B4
 
-SDA = D27
-SCL = D28
+SDA = D3
+SCL = D5
 
 SCLK = D23
 MOSI = D19
 MISO = D21
 CS = D24
 
-UART0_TX = D13
-UART0_RX = D11
-UART1_TX = D8
-UART1_RX = D10
+UART0_TX = D8
+UART0_RX = D10
+UART1_TX = D13
+UART1_RX = D11
 
 UART1_CTS = D29
 UART1_RTS = D31