Change PINs to OrangePI R1 spec

diff --git a/src/adafruit_blinka/board/original_orangepipc.py b/src/adafruit_blinka/board/original_orangepipc.py
new file mode 100644 (file)
index 0000000..8c6e88e
--- /dev/null
+++ b/src/adafruit_blinka/board/original_orangepipc.py
@@ -0,0 +1,41 @@
+"""Pin definitions for the Orange Pi PC."""
+
+from adafruit_blinka.microcontroller.allwinner_h3 import pin
+
+PA12 = pin.PA12
+SDA = pin.PA12
+PA11 = pin.PA11
+SCL = pin.PA11
+PA6 = pin.PA6
+PA1 = pin.PA1
+PA0 = pin.PA0
+PA3 = pin.PA3
+PC0 = pin.PC0
+MOSI = pin.PC0
+PC1 = pin.PC1
+MISO = pin.PC1
+PC2 = pin.PC2
+SCK = pin.PC2
+SCLK = pin.PC2
+PA19 = pin.PA19
+PA7 = pin.PA7
+PA8 = pin.PA8
+PA9 = pin.PA9
+PA10 = pin.PA10
+PA20 = pin.PA20
+
+PA13 = pin.PA13
+TX = pin.PA13
+PA14 = pin.PA14
+RX = pin.PA14
+PD14 = pin.PD14
+PC4 = pin.PC4
+PC7 = pin.PC7
+PA2 = pin.PA2
+PC3 = pin.PC3
+PA21 = pin.PA21
+PA18 = pin.PA18
+PG8 = pin.PG8
+PG9 = pin.PG9
+PG6 = pin.PG6
+PG7 = pin.PG7

diff --git a/src/adafruit_blinka/microcontroller/allwinner_h3/original_pin.py b/src/adafruit_blinka/microcontroller/allwinner_h3/original_pin.py
new file mode 100644 (file)
index 0000000..ba43379
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/allwinner_h3/original_pin.py
@@ -0,0 +1,59 @@
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+PA0 = Pin(0)
+UART2_TX = PA0
+PA1 = Pin(1)
+UART2_RX = PA1
+PA2 = Pin(2)
+PA3 = Pin(3)
+PA6 = Pin(6)
+PA7 = Pin(7)
+PA8 = Pin(8)
+PA9 = Pin(9)
+PA10 = Pin(10)
+PA11 = Pin(11)
+TWI0_SCL = PA11
+PA12 = Pin(12)
+TWI0_SDA = PA12
+PA13 = Pin(13)
+UART3_TX = PA13
+PA14 = Pin(14)
+UART3_RX = PA14
+PA15 = Pin(15)
+PA16 = Pin(16)
+PA17 = Pin(17)
+PA18 = Pin(18)
+PA19 = Pin(19)
+PA20 = Pin(20)
+PA21 = Pin(21)
+
+PC0 = Pin(64)
+SPI0_MOSI = PC0
+PC1 = Pin(65)
+SPI0_MISO = PC1
+PC2 = Pin(66)
+SPI0_SCLK = PC2
+PC3 = Pin(67)
+SPI0_CS = PC3
+PC4 = Pin(68)
+PC7 = Pin(71)
+
+PD14 = Pin(110)
+
+PG6 = Pin(198)
+UART1_TX = PG6
+PG7 = Pin(199)
+UART1_RX = PG7
+PG8 = Pin(200)
+PG9 = Pin(201)
+PG10 = Pin(202)
+PG11 = Pin(203)
+PG12 = Pin(204)
+PG13 = Pin(205)
+
+
+i2cPorts = ( (0, TWI0_SCL, TWI0_SDA), )
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), )
+# ordered as uartId, txId, rxId
+uartPorts = ( (3, UART3_TX, UART3_RX), )

diff --git a/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py b/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
index ba4337988bff3e70712e4bf577244679af634175..44241a3689effc78ea8d9508173619c7bd08080d 100644 (file)
--- a/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
+++ b/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
@@ -4,17 +4,13 @@ PA0 = Pin(0)
 UART2_TX = PA0
 PA1 = Pin(1)
 UART2_RX = PA1
-PA2 = Pin(2)
-PA3 = Pin(3)
 PA6 = Pin(6)
 PA7 = Pin(7)
-PA8 = Pin(8)
-PA9 = Pin(9)
 PA10 = Pin(10)
-PA11 = Pin(11)
-TWI0_SCL = PA11
-PA12 = Pin(12)
-TWI0_SDA = PA12
+PA11 = Pin(8)
+SDA = PA11
+PA12 = Pin(9)
+SCL = PA12
 PA13 = Pin(13)
 UART3_TX = PA13
 PA14 = Pin(14)
@@ -52,7 +48,7 @@ PG12 = Pin(204)
 PG13 = Pin(205)
 
 
-i2cPorts = ( (0, TWI0_SCL, TWI0_SDA), )
+i2cPorts = ( (0, SCL, SDA), )
 # ordered as spiId, sckId, mosiId, misoId
 spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), )
 # ordered as uartId, txId, rxId