Adding "microcontroller" files for allwinner h6

diff --git a/src/adafruit_blinka/microcontroller/allwinner/h6/__init__.py b/src/adafruit_blinka/microcontroller/allwinner/h6/__init__.py
new file mode 100644 (file)
index 0000000..0eabf00
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/allwinner/h6/__init__.py
@@ -0,0 +1 @@
+"""Definition for the AllWinner H6 chip"""

diff --git a/src/adafruit_blinka/microcontroller/allwinner/h6/pin.py b/src/adafruit_blinka/microcontroller/allwinner/h6/pin.py
new file mode 100644 (file)
index 0000000..af944e3
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/allwinner/h6/pin.py
@@ -0,0 +1,47 @@
+"""Allwinner H6 Pin Names"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+PC16 = Pin((1, 79))
+
+PD14 = Pin((1, 110))
+PD15 = Pin((1, 111))
+PD16 = Pin((1, 112))
+PD17 = Pin((1, 113))
+PD18 = Pin((1, 114))
+PD19 = Pin((1, 115))
+UART2_TX = PD19
+PD20 = Pin((1, 116))
+UART2_RX = PD20
+PD21 = Pin((1, 117))
+PD22 = Pin((1, 118))
+PD23 = Pin((1, 119))
+PD24 = Pin((1, 120))
+PD25 = Pin((1, 121))
+TWI0_SCL = PD25
+PD26 = Pin((1, 122))
+TWI0_SDA = PD26
+
+PG10 = Pin((1, 202))
+PG11 = Pin((1, 203))
+PG12 = Pin((1, 204))
+PG13 = Pin((1, 205))
+PG14 = Pin((1, 206))
+
+PH2 = Pin((1, 226))
+PH3 = Pin((1, 227))
+SPI1_CS = PH3
+PH4 = Pin((1, 228))
+SPI1_SCLK = PH4
+PH5 = Pin((1, 229))
+SPI1_MOSI = PH5
+PH6 = Pin((1, 230))
+SPI1_MISO = PH6
+PH8 = Pin((1, 230))
+PH9 = Pin((1, 231))
+
+PL8 = Pin((1, 360))
+PL9 = Pin((1, 361))
+
+i2cPorts = ((0, TWI0_SCL, TWI0_SDA),)
+spiPorts = ((0, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),)
+uartPorts = ((2, UART2_TX, UART2_RX),)