--- /dev/null
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""A Pin class for use with libgpiod 1.x."""
+import gpiod
+
+
+# pylint: disable=too-many-branches,too-many-statements
+class Pin:
+ """Pins dont exist in CPython so...lets make our own!"""
+
+ IN = 0
+ OUT = 1
+ LOW = 0
+ HIGH = 1
+ PULL_NONE = 0
+ PULL_UP = 1
+ PULL_DOWN = 2
+ _CONSUMER = "adafruit_blinka"
+
+ id = None
+ _value = LOW
+ _mode = IN
+
+ def __init__(self, pin_id):
+ self.id = pin_id
+ if isinstance(pin_id, tuple):
+ self._num = int(pin_id[1])
+ if hasattr(gpiod, "Chip"):
+ self._chip = gpiod.Chip(str(pin_id[0]), gpiod.Chip.OPEN_BY_NUMBER)
+ else:
+ self._chip = gpiod.chip(str(pin_id[0]), gpiod.chip.OPEN_BY_NUMBER)
+ else:
+ self._num = int(pin_id)
+ if hasattr(gpiod, "Chip"):
+ self._chip = gpiod.Chip("gpiochip0", gpiod.Chip.OPEN_BY_NAME)
+ else:
+ self._chip = gpiod.chip("gpiochip0", gpiod.chip.OPEN_BY_NAME)
+ self._line = None
+
+ def __repr__(self):
+ return str(self.id)
+
+ def __eq__(self, other):
+ return self.id == other
+
+ def init(self, mode=IN, pull=None):
+ """Initialize the Pin"""
+ if not self._line:
+ self._line = self._chip.get_line(int(self._num))
+ # print("init line: ", self.id, self._line)
+
+ if mode is not None:
+ if mode == self.IN:
+ flags = 0
+ self._line.release()
+ if pull is not None:
+ if pull == self.PULL_UP:
+ if hasattr(gpiod, "LINE_REQ_FLAG_BIAS_PULL_UP"):
+ flags |= gpiod.LINE_REQ_FLAG_BIAS_PULL_UP
+ else:
+ raise NotImplementedError(
+ "Internal pullups not supported in this version of libgpiod, "
+ "use physical resistor instead!"
+ )
+ elif pull == self.PULL_DOWN:
+ if hasattr(gpiod, "line") and hasattr(
+ gpiod, "LINE_REQ_FLAG_BIAS_PULL_DOWN"
+ ):
+ flags |= gpiod.LINE_REQ_FLAG_BIAS_PULL_DOWN
+ else:
+ raise NotImplementedError(
+ "Internal pulldowns not supported in this version of libgpiod, "
+ "use physical resistor instead!"
+ )
+ elif pull == self.PULL_NONE:
+ if hasattr(gpiod, "line") and hasattr(
+ gpiod, "LINE_REQ_FLAG_BIAS_DISABLE"
+ ):
+ flags |= gpiod.LINE_REQ_FLAG_BIAS_DISABLE
+ else:
+ raise NotImplementedError(
+ "Internal pulldowns not supported in this version of libgpiod, "
+ "use physical resistor instead!"
+ )
+ else:
+ raise RuntimeError(f"Invalid pull for pin: {self.id}")
+
+ self._mode = self.IN
+ self._line.release()
+ if hasattr(gpiod, "LINE_REQ_DIR_IN"):
+ self._line.request(
+ consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_IN, flags=flags
+ )
+ else:
+ config = gpiod.line_request()
+ config.consumer = self._CONSUMER
+ config.request_type = gpiod.line_request.DIRECTION_INPUT
+ self._line.request(config)
+
+ elif mode == self.OUT:
+ if pull is not None:
+ raise RuntimeError("Cannot set pull resistor on output")
+ self._mode = self.OUT
+ self._line.release()
+ if hasattr(gpiod, "LINE_REQ_DIR_OUT"):
+ self._line.request(
+ consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_OUT
+ )
+ else:
+ config = gpiod.line_request()
+ config.consumer = self._CONSUMER
+ config.request_type = gpiod.line_request.DIRECTION_OUTPUT
+ self._line.request(config)
+ else:
+ raise RuntimeError("Invalid mode for pin: %s" % self.id)
+
+ def value(self, val=None):
+ """Set or return the Pin Value"""
+ if val is None:
+ return self._line.get_value()
+
+ if val in (self.LOW, self.HIGH):
+ self._value = val
+ self._line.set_value(val)
+ return None
+ raise RuntimeError("Invalid value for pin")
--- /dev/null
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""A Pin class for use with libgpiod 2.x."""
+import gpiod
+
+
+# pylint: disable=too-many-branches,too-many-statements
+class Pin:
+ """Pins dont exist in CPython so...lets make our own!"""
+
+ IN = 0
+ OUT = 1
+ LOW = 0
+ HIGH = 1
+ PULL_NONE = 0
+ PULL_UP = 1
+ PULL_DOWN = 2
+ _CONSUMER = "adafruit_blinka"
+
+ id = None
+ _value = LOW
+ _mode = IN
+
+ _value_map = (gpiod.line.Value.INACTIVE, gpiod.line.Value.ACTIVE)
+
+ def __init__(self, pin_id):
+ self.id = pin_id
+ chip_id = 0
+ if isinstance(pin_id, tuple):
+ chip_id, self._num = pin_id
+ if isinstance(chip_id, int):
+ chip_id = f"/dev/gpiochip{chip_id}"
+ self._chip = gpiod.Chip(chip_id)
+ self._line_request = None
+
+ def __del__(self):
+ if self._line_request:
+ self._line_request.release()
+
+ def __repr__(self):
+ return str(self.id)
+
+ def __eq__(self, other):
+ return self.id == other
+
+ def init(self, mode=IN, pull=None):
+ """Initialize the Pin"""
+ # Input,
+ if not self._line_request:
+ self._line_request = self._chip.request_lines(
+ config={int(self._num): None},
+ consumer=self._CONSUMER,
+ )
+ # print("init line: ", self.id, self._line)
+
+ if mode is not None:
+ line_config = gpiod.LineSettings()
+ if mode == self.IN:
+ line_config.direction = gpiod.line.Direction.INPUT
+ if pull is not None:
+ if pull == self.PULL_UP:
+ line_config.bias = gpiod.line.Bias.PULL_UP
+ elif pull == self.PULL_DOWN:
+ line_config.bias = gpiod.line.Bias.PULL_DOWN
+ elif pull == self.PULL_NONE:
+ line_config.bias = gpiod.line.Bias.DISABLED
+ else:
+ raise RuntimeError(f"Invalid pull for pin: {self.id}")
+
+ self._mode = self.IN
+ self._line_request.reconfigure_lines(
+ {
+ int(self._num): line_config,
+ }
+ )
+ elif mode == self.OUT:
+ if pull is not None:
+ raise RuntimeError("Cannot set pull resistor on output")
+ self._mode = self.OUT
+ line_config.direction = gpiod.line.Direction.OUTPUT
+ self._line_request.reconfigure_lines(
+ {
+ int(self._num): line_config,
+ }
+ )
+ else:
+ raise RuntimeError("Invalid mode for pin: %s" % self.id)
+
+ def value(self, val=None):
+ """Set or return the Pin Value"""
+ if val is None:
+ return bool(self._value_map.index(self._line_request.get_value(self._num)))
+
+ if val in (self.LOW, self.HIGH):
+ self._value = val
+ self._line_request.set_value(self._num, self._value_map[int(val)])
+ return None
+ raise RuntimeError("Invalid value for pin")
"https://github.com/adafruit/Raspberry-Pi-Installer-Scripts/blob/master/libgpiod.sh"
) from ImportError
-
-# pylint: disable=too-many-branches,too-many-statements
-class Pin:
- """Pins dont exist in CPython so...lets make our own!"""
-
- IN = 0
- OUT = 1
- LOW = 0
- HIGH = 1
- PULL_NONE = 0
- PULL_UP = 1
- PULL_DOWN = 2
- _CONSUMER = "adafruit_blinka"
-
- id = None
- _value = LOW
- _mode = IN
-
- def __init__(self, pin_id):
- self.id = pin_id
- if isinstance(pin_id, tuple):
- self._num = int(pin_id[1])
- if hasattr(gpiod, "Chip"):
- self._chip = gpiod.Chip(str(pin_id[0]), gpiod.Chip.OPEN_BY_NUMBER)
- else:
- self._chip = gpiod.chip(str(pin_id[0]), gpiod.chip.OPEN_BY_NUMBER)
- else:
- self._num = int(pin_id)
- if hasattr(gpiod, "Chip"):
- self._chip = gpiod.Chip("gpiochip0", gpiod.Chip.OPEN_BY_NAME)
- else:
- self._chip = gpiod.chip("gpiochip0", gpiod.chip.OPEN_BY_NAME)
- self._line = None
-
- def __repr__(self):
- return str(self.id)
-
- def __eq__(self, other):
- return self.id == other
-
- def init(self, mode=IN, pull=None):
- """Initialize the Pin"""
- if not self._line:
- self._line = self._chip.get_line(int(self._num))
- # print("init line: ", self.id, self._line)
-
- if mode is not None:
- if mode == self.IN:
- flags = 0
- self._line.release()
- if pull is not None:
- if pull == self.PULL_UP:
- if hasattr(gpiod, "LINE_REQ_FLAG_BIAS_PULL_UP"):
- flags |= gpiod.LINE_REQ_FLAG_BIAS_PULL_UP
- else:
- raise NotImplementedError(
- "Internal pullups not supported in this version of libgpiod, "
- "use physical resistor instead!"
- )
- elif pull == self.PULL_DOWN:
- if hasattr(gpiod, "line") and hasattr(
- gpiod, "LINE_REQ_FLAG_BIAS_PULL_DOWN"
- ):
- flags |= gpiod.LINE_REQ_FLAG_BIAS_PULL_DOWN
- else:
- raise NotImplementedError(
- "Internal pulldowns not supported in this version of libgpiod, "
- "use physical resistor instead!"
- )
- elif pull == self.PULL_NONE:
- if hasattr(gpiod, "line") and hasattr(
- gpiod, "LINE_REQ_FLAG_BIAS_DISABLE"
- ):
- flags |= gpiod.LINE_REQ_FLAG_BIAS_DISABLE
- else:
- raise NotImplementedError(
- "Internal pulldowns not supported in this version of libgpiod, "
- "use physical resistor instead!"
- )
- else:
- raise RuntimeError(f"Invalid pull for pin: {self.id}")
-
- self._mode = self.IN
- self._line.release()
- if hasattr(gpiod, "LINE_REQ_DIR_IN"):
- self._line.request(
- consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_IN, flags=flags
- )
- else:
- config = gpiod.line_request()
- config.consumer = self._CONSUMER
- config.request_type = gpiod.line_request.DIRECTION_INPUT
- self._line.request(config)
-
- elif mode == self.OUT:
- if pull is not None:
- raise RuntimeError("Cannot set pull resistor on output")
- self._mode = self.OUT
- self._line.release()
- if hasattr(gpiod, "LINE_REQ_DIR_OUT"):
- self._line.request(
- consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_OUT
- )
- else:
- config = gpiod.line_request()
- config.consumer = self._CONSUMER
- config.request_type = gpiod.line_request.DIRECTION_OUTPUT
- self._line.request(config)
- else:
- raise RuntimeError("Invalid mode for pin: %s" % self.id)
-
- def value(self, val=None):
- """Set or return the Pin Value"""
- if val is None:
- return self._line.get_value()
-
- if val in (self.LOW, self.HIGH):
- self._value = val
- self._line.set_value(val)
- return None
- raise RuntimeError("Invalid value for pin")
+# Versions 1.5.4 and earlier have no __version__ attribute
+if hasattr(gpiod, "__version__"):
+ version = gpiod.__version__
+else:
+ version = "1.x"
+
+if version.startswith("1."):
+ from .libgpiod.libgpiod_pin_1_x import Pin # pylint: disable=unused-import
+else:
+ from .libgpiod.libgpiod_pin_2_x import Pin # pylint: disable=unused-import
uartPorts = (
(0, GP0, GP1),
(0, GP0, GP13),
+ (0, GP0, GP17),
+ (0, GP0, GP29),
(0, GP12, GP1),
(0, GP12, GP13),
+ (0, GP12, GP17),
+ (0, GP12, GP29),
+ (0, GP16, GP1),
+ (0, GP16, GP13),
+ (0, GP16, GP17),
+ (0, GP16, GP29),
+ (0, GP28, GP1),
+ (0, GP28, GP13),
+ (0, GP28, GP17),
+ (0, GP28, GP29),
(1, GP4, GP5),
(1, GP4, GP9),
+ (1, GP4, GP21),
+ (1, GP4, GP25),
(1, GP8, GP5),
(1, GP8, GP9),
+ (1, GP8, GP21),
+ (1, GP8, GP25),
+ (1, GP20, GP5),
+ (1, GP20, GP9),
+ (1, GP20, GP21),
+ (1, GP20, GP25),
+ (1, GP24, GP5),
+ (1, GP24, GP9),
+ (1, GP24, GP21),
+ (1, GP24, GP25),
)
# ordered as scl, sda
projects / Adafruit_Blinka-hackapet.git / commitdiff