Add Octavo RED and BRK board support (#1)

Add Octavo OSD32MP1 RED and BRK board support

diff --git a/src/adafruit_blinka/board/stm32/osd32mp1_brk.py b/src/adafruit_blinka/board/stm32/osd32mp1_brk.py
new file mode 100644 (file)
index 0000000..3fa9e46
--- /dev/null
+++ b/src/adafruit_blinka/board/stm32/osd32mp1_brk.py
@@ -0,0 +1,169 @@
+"""Pin definitions for the Octavo OSD32MP1 BRK board."""
+
+# See: https://octavosystems.com/octavosystems.com/wp-content/uploads/2020/05/Default-Pin-Mapping.pdf  # pylint: disable=line-too-long
+
+from adafruit_blinka.microcontroller.stm32.stm32mp157 import pin
+
+# Board pin name = OSD32MP1 pin name = STM32MP1 pin name
+
+# fmt: off
+# --------------------------------
+# Header Location A
+# --------------------------------
+# VIN - VIN                    A01
+ADC_IN0 = ANA0 = pin.PAN0    # A02
+TIM8_CH2 = PI6 = pin.PI6     # A03
+GPIO_PI5 = PI5 = pin.PI5     # A04
+SPI2_NSS = PI0 = pin.PI0     # A05
+SPI2_SCK = PI1 = pin.PI1     # A06
+FDCAN1_RX = PH14 = pin.PH14  # A07
+FDCAN1_TX = PH13 = pin.PH13  # A08
+I2C1_SCL = PH11 = pin.PH11   # A09
+TIM12_CH2 = PH9 = pin.PH9    # A10
+SPI4_MOSI = PE14 = pin.PE14  # A11
+SPI4_NSS = PE11 = pin.PE11   # A12
+GPIO_PH8 = PH8 = pin.PH8     # A13
+GPIO_PD10 = PD10 = pin.PD10  # A14
+GPIO_PH5 = PH5 = pin.PH5     # A15
+USART2_RX = PF4 = pin.PF4    # A16
+USART2_TX = PF5 = pin.PF5    # A17
+I2C2_SCL = PF1 = pin.PF1     # A18
+I2C2_SDA = PG15 = pin.PG15   # A19
+GPIO_PD4 = PD4 = pin.PD4     # A20
+GPIO_PD6 = PD6 = pin.PD6     # A21
+I2C5_SDA = PD0 = pin.PD0     # A22
+TIM4_CH2 = PB7 = pin.PB7     # A23
+GPIO_PE3 = PE3 = pin.PE3     # A24
+GPIO_PB15 = PB15 = pin.PB15  # A25
+UART7_RX = PB3 = pin.PB3     # A26
+GPIO_PE5 = PE5 = pin.PE5     # A27
+GPIO_PB14 = PB14 = pin.PE14  # A28
+# GND - VSS                    A29
+# GND - VSS                    A30
+
+# --------------------------------
+# Header Location B
+# --------------------------------
+# VIN - VIN                    B01
+ADC_IN1 = ANA1 = pin.PAN1    # B02
+GPIO_PI7 = PI7 = pin.PI7     # B03
+GPIO_PI4 = PI4 = pin.PI4     # B04
+SPI2_MOSI = PI3 = pin.PI3    # B05
+SPI2_MISO = PI2 = pin.PI2    # B06
+GPIO_PH15 = PH15 = pin.PH15  # B07
+I2C1_SDA = PH12 = pin.PH12   # B08
+GPIO_PH10 = PH10 = pin.PH10  # B09
+GPIO_PE15 = PE15 = pin.PE15  # B10
+SPI4_SCK = PE12 = pin.PE12   # B11
+GPIO_PH4 = PH4 = pin.PH4     # B12
+SPI4_MISO = PE13 = pin.PE13  # B13
+UART8_RX = PE0 = pin.PE0     # B14
+UART8_TX = PE1 = pin.PE1     # B15
+GPIO_PF0 = PF0 = pin.PF0     # B16
+GPIO_PE6 = PE6 = pin.PE6     # B17
+GPIO_PD7 = PD7 = pin.PD7     # B18
+GPIO_PD5 = PD5 = pin.PD5     # B19
+I2C5_SCL = PD1 = pin.PD1     # B20
+GPIO_PD3 = PD3 = pin.PD3     # B21
+TIM1_CH2 = PA9 = pin.PA9     # B22
+GPIO_PB9 = PB9 = pin.PB9     # B23
+GPIO_PB8 = PB8 = pin.PB8     # B24
+GPIO_PB4 = PB4 = pin.PB4     # B25
+GPIO_PG6 = PG6 = pin.PG6     # B26
+UART7_TX = PA15 = pin.PA15   # B27
+GPIO_PC7 = PC7 = pin.PC7     # B28
+# USB1_DP - USB_DP1            B29
+# USB1_DN - USB_DM1            B30
+
+# --------------------------------
+# Header Location C
+# --------------------------------
+# 3.3V - PMIC_V4OUT            C01
+GPIO_PD9 = PD9 = pin.PD9     # C02
+GPIO_PD15 = PD15 = pin.PD15  # C03
+GPIO_PD14 = PD14 = pin.PD14  # C04
+GPIO_PF3 = PF3 = pin.PF3     # C05
+GPIO_PC3 = PC3 = pin.PC3     # C06
+GPIO_PG13 = PG13 = pin.PG13  # C07
+GPIO_PG1 = PG1 = pin.PG1     # C08
+GPIO_PG4 = PG4 = pin.PG4     # C09
+GPIO_PF14 = PF14 = pin.PF14  # C10
+GPIO_PB1 = PB1 = pin.PB1     # C11
+SPI6_MISO = PZ1 = pin.PZ1    # C12
+SPI6_NSS = PZ3 = pin.PZ3     # C13
+# PONKEY - PWC_PONKEY          C14
+# VLD02 - PMIC_LD02            C15
+# VBAT - VBAT                  C16
+# VSW - PMC_SWOUT              C17
+# VBST - PMIC_BSTOUT           C18
+GPIO_PC5 = PC5 = pin.PC5     # C19
+GPIO_PA1 = PA1 = pin.PA1     # C20
+GPIO_PC4 = PC4 = pin.PC4     # C21
+GPIO_PB10 = PB10 = pin.PB10  # C22
+UART5_RX = PB12 = pin.PB12   # C23
+GPIO_PC1 = PC1 = pin.PC1     # C24
+GPIO_PA4 = PA4 = pin.PA4     # C25
+GPIO_PA6 = PA6 = pin.PA6     # C26
+GPIO_PD11 = PD11 = pin.PD11  # C27
+GPIO_PF6 = PF6 = pin.PF6     # C28
+GPIO_PD12 = PD12 = pin.PD12  # C29
+GPIO_PB6 = PB6 = pin.PB6     # C30
+
+# --------------------------------
+# Header Location D
+# --------------------------------
+# 3.V - PMIC_V4OUT             D01
+# RESETN - NRST                D02
+GPIO_PD8 = PD8 = pin.PD8     # D03
+GPIO_PA14 = PA14 = pin.PA14  # D04
+GPIO_PG12 = PG12 = pin.PG12  # D05
+GPIO_PA3 = PA3 = pin.PA3     # D06
+GPIO_PE2 = PE2 = pin.PE2     # D07
+GPIO_PG14 = PG14 = pin.PG14  # D08
+GPIO_PG2 = PG2 = pin.PG2     # D09
+GPIO_PB11 = PB11 = pin.PB11  # D10
+GPIO_PF13 = PF13 = pin.PF13  # D11
+SPI6_SCK = PZ0 = pin.PZ0     # D12
+SPI6_MOSI = PZ2 = pin.PZ2    # D13
+GPIO_PC2 = PC2 = pin.PC2     # D14
+GPIO_PG0 = PG0 = pin.PG0     # D15
+GPIO_PG3 = PG3 = pin.PG3     # D16
+GPIO_PF15 = PF15 = pin.PF15  # D17
+GPIO_PF12 = PF12 = pin.PF12  # D18
+GPIO_PG5 = PG5 = pin.PG5     # D19
+TIM3_CH2 = PB5 = pin.PB5     # D20
+GPIO_PB0 = PB0 = pin.PB0     # D21
+GPIO_PA7 = PA7 = pin.PA7     # D22
+UART5_TX = PB13 = pin.PB13   # D23
+GPIO_PA2 = PA2 = pin.PA2     # D24
+GPIO_PA5 = PA5 = pin.PA5     # D25
+GPIO_PC0 = PC0 = pin.PC0     # D26
+GPIO_PF11 = PF11 = pin.PF11  # D27
+GPIO_PD13 = PD13 = pin.PD13  # D28
+# GND - VSS                    D29
+# GND - VSS                    D30
+# fmt: on
+
+# I2C defaults
+SDA1 = SDA = I2C1_SDA
+SCL1 = SCL = I2C1_SCL
+SDA2 = I2C2_SDA
+SCL2 = I2C2_SCL
+SDA5 = I2C5_SDA
+SCL5 = I2C5_SCL
+
+# SPI defaults
+SCK = SPI2_SCK
+MOSI = SPI2_MOSI
+MISO = SPI2_MISO
+CS = SPI2_NSS
+
+# Board LED's
+LED1_RED = pin.PZ6
+LED1_GRN = pin.PZ7
+LED2_RED = pin.PI8
+LED2_GRN = pin.PI9
+
+# Console UART
+UART4_TX = pin.PG11
+UART4_RX = pin.PB2

diff --git a/src/adafruit_blinka/board/stm32/osd32mp1_red.py b/src/adafruit_blinka/board/stm32/osd32mp1_red.py
new file mode 100644 (file)
index 0000000..67395f9
--- /dev/null
+++ b/src/adafruit_blinka/board/stm32/osd32mp1_red.py
@@ -0,0 +1,53 @@
+"""Pin definitions for the Octavo OSD32MP1 RED board."""
+
+from adafruit_blinka.microcontroller.stm32.stm32mp157 import pin
+
+# RPi header JP20
+D0 = pin.PF15
+D1 = pin.PD12
+D2 = pin.PA12
+D3 = pin.PA11
+D4 = pin.PI11
+D5 = pin.PG2
+D6 = pin.PH11
+D7 = pin.PF13
+D8 = pin.PF6
+D9 = pin.PF8
+D10 = pin.PF9
+D11 = pin.PF7
+D12 = pin.PD13
+D13 = pin.PB5
+D14 = pin.PB10
+D15 = pin.PB12
+D16 = pin.PB13
+D17 = pin.PG8
+D18 = pin.PI5
+D19 = pin.PI7
+D20 = pin.PI6
+D21 = pin.PE11
+D22 = pin.PG15
+D23 = pin.PF1
+D24 = pin.PF0
+D25 = pin.PF4
+D26 = pin.PF5
+D27 = pin.PD7
+
+I2C5_SDA = SDA = D2
+I2C5_SCL = SCL = D3
+
+I2C1_SDA = ID_SD = D0
+I2C1_SCL = ID_SC = D1
+
+SPI5_SCLK = SCLK = SCK = D11
+SPI5_MOSI = MOSI = D10
+SPI5_MISO = MISO = D9
+SPI5_NSS = CS = CE0 = D8
+
+PI_GPIO7 = CE1 = D7
+
+UART_TX = D14
+UART_RX = D15
+
+# Console UART
+UART4_TX = pin.PG11
+UART4_RX = pin.PB2

diff --git a/src/adafruit_blinka/microcontroller/stm32/stm32mp157/pin.py b/src/adafruit_blinka/microcontroller/stm32/stm32mp157/pin.py
index 6aa6426a617f2baa5a6755d65c96694acf736ad2..c7ad7568fb1adf5841c522068963313671e36e3c 100755 (executable)
--- a/src/adafruit_blinka/microcontroller/stm32/stm32mp157/pin.py
+++ b/src/adafruit_blinka/microcontroller/stm32/stm32mp157/pin.py
@@ -94,6 +94,7 @@ PF12 = Pin((5, 12))
 PF13 = Pin((5, 13))
 PF14 = Pin((5, 14))
 PF15 = Pin((5, 15))
+PG0 = Pin((6, 0))
 PG1 = Pin((6, 1))
 PG2 = Pin((6, 2))
 PG3 = Pin((6, 3))

diff --git a/src/board.py b/src/board.py
index 576a98dedf5f868681e9e6188bb3b147ac59ee47..c39f1e25f365c2d676a0a61b51a7c224aa16d7f0 100755 (executable)
--- a/src/board.py
+++ b/src/board.py
@@ -229,6 +229,12 @@ elif board_id == ap_board.UDOO_X86:
 elif board_id == ap_board.STM32MP157C_DK2:
     from adafruit_blinka.board.stm32.stm32mp157c_dk2 import *
 
+elif board_id == ap_board.OSD32MP1_RED:
+    from adafruit_blinka.board.stm32.osd32mp1_red import *
+
+elif board_id == ap_board.OSD32MP1_BRK:
+    from adafruit_blinka.board.stm32.osd32mp1_brk import *
+
 elif board_id == ap_board.LUBANCAT_IMX6ULL:
     from adafruit_blinka.board.lubancat.lubancat_imx6ull import *