Added Odroid C2

diff --git a/src/adafruit_blinka/board/odroidc2.py b/src/adafruit_blinka/board/odroidc2.py
new file mode 100644 (file)
index 0000000..c43ebce
--- /dev/null
+++ b/src/adafruit_blinka/board/odroidc2.py
@@ -0,0 +1,78 @@
+"""Pin definitions for the Odroid C2."""
+
+from adafruit_blinka.microcontroller.amlogic.s905 import pin
+
+GPIOX_0 = pin.GPIO228
+GPIOX_1 = pin.GPIO229
+GPIOX_2 = pin.GPIO230
+GPIOX_3 = pin.GPIO231
+GPIOX_4 = pin.GPIO232
+GPIOX_5 = pin.GPIO233
+GPIOX_6 = pin.GPIO234
+GPIOX_7 = pin.GPIO235
+GPIOX_8 = pin.GPIO236
+GPIOX_9 = pin.GPIO237
+GPIOX_10 = pin.GPIO238
+GPIOX_11 = pin.GPIO239
+GPIOX_12 = pin.GPIO240
+GPIOX_13 = pin.GPIO241
+GPIOX_19 = pin.GPIO247
+GPIOX_21 = pin.GPIO249
+
+GPIODV_24 = pin.GPIO205
+GPIODV_25 = pin.GPIO206
+GPIODV_26 = pin.GPIO207
+GPIODV_27 = pin.GPIO208
+GPIODV_28 = pin.GPIO209
+GPIODV_29 = pin.GPIO210
+
+GPIOY_0 = pin.GPIO211
+GPIOY_1 = pin.GPIO212
+GPIOY_3 = pin.GPIO214
+GPIOY_7 = pin.GPIO218
+GPIOY_8 = pin.GPIO219
+GPIOY_12 = pin.GPIO223
+GPIOY_13 = pin.GPIO224
+GPIOY_14 = pin.GPIO225
+
+GPIOA0_0 = pin.GPIO122
+GPIOA0_1 = pin.GPIO123
+GPIOA0_2 = pin.GPIO124
+GPIOA0_3 = pin.GPIO125
+GPIOA0_4 = pin.GPIO126
+GPIOA0_5 = pin.GPIO127
+GPIOA0_6 = pin.GPIO128
+GPIOA0_7 = pin.GPIO129
+GPIOA0_8 = pin.GPIO130
+GPIOA0_9 = pin.GPIO131
+GPIOA0_10 = pin.GPIO132
+GPIOA0_11 = pin.GPIO133
+GPIOA0_12 = pin.GPIO134
+GPIOA0_13 = pin.GPIO135
+
+SDA = pin.I2C0_SDA
+SCL = pin.I2C0_SCL
+
+SCLK = pin.SPI0_SCLK
+MOSI = pin.SPI0_MOSI
+MISO = pin.SPI0_MISO
+
+D0 = GPIOX_19
+D1 = GPIOX_10
+D2 = GPIOX_11
+D3 = GPIOX_9
+D4 = GPIOX_8
+D5 = GPIOX_5
+D6 = GPIOX_3
+D7 = GPIOX_21
+D10 = GPIOX_1
+D11 = GPIOY_14
+D12 = GPIOX_7
+D13 = GPIOX_4
+D14 = GPIOX_2
+D21 = GPIOX_0
+D22 = GPIOY_8
+D23 = GPIOX_6
+D24 = GPIOY_3
+D26 = GPIOY_13
+D27 = GPIOY_7

diff --git a/src/adafruit_blinka/microcontroller/amlogic/s905/__init__.py b/src/adafruit_blinka/microcontroller/amlogic/s905/__init__.py
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/src/adafruit_blinka/microcontroller/amlogic/s905/pin.py b/src/adafruit_blinka/microcontroller/amlogic/s905/pin.py
new file mode 100644 (file)
index 0000000..f50f40b
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/amlogic/s905/pin.py
@@ -0,0 +1,83 @@
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+GPIO122 = Pin((0, 0))
+GPIO123 = Pin((0, 1))
+GPIO124 = Pin((0, 2))
+GPIO125 = Pin((0, 3))
+GPIO126 = Pin((0, 4))
+GPIO127 = Pin((0, 5))
+GPIO128 = Pin((0, 6))
+GPIO129 = Pin((0, 7))
+GPIO130 = Pin((0, 8))
+GPIO131 = Pin((0, 9))
+GPIO132 = Pin((0, 10))
+GPIO133 = Pin((0, 11))
+GPIO134 = Pin((0, 12))
+GPIO135 = Pin((0, 13))
+
+GPIO205 = Pin((1, 69))
+GPIO206 = Pin((1, 70))
+GPIO207 = Pin((1, 71))
+GPIO208 = Pin((1, 72))
+GPIO209 = Pin((1, 73))
+GPIO210 = Pin((1, 74))
+
+GPIO211 = Pin((1, 75))
+GPIO212 = Pin((1, 76))
+GPIO213 = Pin((1, 77))
+GPIO214 = Pin((1, 78))
+GPIO215 = Pin((1, 79))
+GPIO216 = Pin((1, 80))
+GPIO217 = Pin((1, 81))
+GPIO218 = Pin((1, 82))
+GPIO219 = Pin((1, 83))
+GPIO220 = Pin((1, 84))
+GPIO221 = Pin((1, 85))
+GPIO222 = Pin((1, 86))
+GPIO223 = Pin((1, 87))
+GPIO224 = Pin((1, 88))
+GPIO225 = Pin((1, 89))
+GPIO226 = Pin((1, 90))
+GPIO227 = Pin((1, 91))
+
+GPIO228 = Pin((1, 92))
+GPIO229 = Pin((1, 93))
+GPIO230 = Pin((1, 94))
+GPIO231 = Pin((1, 95))
+GPIO232 = Pin((1, 96))
+GPIO233 = Pin((1, 97))
+GPIO234 = Pin((1, 98))
+GPIO235 = Pin((1, 99))
+GPIO236 = Pin((1, 100))
+GPIO237 = Pin((1, 101))
+GPIO238 = Pin((1, 102))
+GPIO239 = Pin((1, 103))
+GPIO240 = Pin((1, 104))
+GPIO241 = Pin((1, 105))
+GPIO242 = Pin((1, 106))
+GPIO243 = Pin((1, 107))
+GPIO247 = Pin((1, 111))
+GPIO248 = Pin((1, 112))
+GPIO249 = Pin((1, 113))
+
+I2C0_SDA = GPIO205
+I2C0_SCL = GPIO206
+I2C1_SDA = GPIO207
+I2C1_SCL = GPIO208
+I2C2_SDA = GPIO209
+I2C2_SCL = GPIO210
+
+UART1_TX = GPIO240
+UART1_RX = GPIO241
+UART2_TX = GPIO205
+UART2_RX = GPIO206
+
+SPI0_SCLK = GPIO230
+SPI0_MISO = GPIO232
+SPI0_MOSI = GPIO235
+
+i2cPorts = ( (0, I2C0_SCL, I2C0_SDA), (1, I2C1_SCL, I2C1_SDA), )
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), )
+# ordered as uartId, txId, rxId
+uartPorts = ( (1, UART1_TX, UART1_RX), (2, UART2_TX, UART2_RX), )

diff --git a/src/board.py b/src/board.py
index 9732e4ef923470c83c25d2395bdc41802055b5bd..2b8aa1477f4af01219b2553252f2d99ca8ffdd45 100755 (executable)
--- a/src/board.py
+++ b/src/board.py
@@ -82,6 +82,9 @@ elif board_id == ap_board.JETSON_NANO:
 elif board_id == ap_board.CORAL_EDGE_TPU_DEV:
     from adafruit_blinka.board.coral_edge_tpu import *
 
+elif board_id == ap_board.ODROID_C2:
+    from adafruit_blinka.board.odroidc2 import *
+
 elif "sphinx" in sys.modules:
     pass
 

diff --git a/src/digitalio.py b/src/digitalio.py
index f3fbced83476cea254e9bc83aa74f5dfb9ed9dd4..be536ec144b6dcfcf0fd2c6a9ece9971b90cabb7 100755 (executable)
--- a/src/digitalio.py
+++ b/src/digitalio.py
@@ -25,6 +25,8 @@ elif detector.chip.T186:
     from adafruit_blinka.microcontroller.tegra.t186.pin import Pin
 elif detector.chip.T194:
     from adafruit_blinka.microcontroller.tegra.t194.pin import Pin
+elif detector.chip.S905:
+    from adafruit_blinka.microcontroller.amlogic.s905.pin import Pin
 elif detector.chip.IMX8MX:
     from adafruit_blinka.microcontroller.nxp_imx8m.pin import Pin
 elif detector.chip.STM32:

diff --git a/src/microcontroller/__init__.py b/src/microcontroller/__init__.py
index 81965ef74db0faa4360217b10864622b9be98d1a..b4c1ed7cb23496dd3c75ce2647b31b6609d30e95 100755 (executable)
--- a/src/microcontroller/__init__.py
+++ b/src/microcontroller/__init__.py
@@ -42,6 +42,8 @@ elif chip_id == ap_chip.T186:
     from adafruit_blinka.microcontroller.tegra.t186 import *
 elif chip_id == ap_chip.T194:
     from adafruit_blinka.microcontroller.tegra.t194 import *
+elif chip_id == ap_chip.S905:
+    from adafruit_blinka.microcontroller.amlogic.s905.pin import *    
 elif chip_id == ap_chip.IMX8MX:
     from adafruit_blinka.microcontroller.nxp_imx8m import *
 else:

diff --git a/src/microcontroller/pin.py b/src/microcontroller/pin.py
index 5d495802baa0ca989e79652bd21c5b4dcd39c770..bde7312c8f03d3717504303517f9080998c2747d 100755 (executable)
--- a/src/microcontroller/pin.py
+++ b/src/microcontroller/pin.py
@@ -24,6 +24,8 @@ elif chip_id == ap_chip.T186:
     from adafruit_blinka.microcontroller.tegra.t186.pin import *
 elif chip_id == ap_chip.T194:
     from adafruit_blinka.microcontroller.tegra.t194.pin import *
+elif chip_id == ap_chip.S905:
+    from adafruit_blinka.microcontroller.amlogic.s905.pin import *
 elif chip_id == ap_chip.IMX8MX:
     from adafruit_blinka.microcontroller.nxp_imx8m.pin import *
 else:

diff --git a/src/pulseio.py b/src/pulseio.py
index 42524fcdccee6f90419bca0def957643b2a1e2bf..82cd66397b1486c860acfee48568683ae435ec7a 100644 (file)
--- a/src/pulseio.py
+++ b/src/pulseio.py
@@ -6,3 +6,5 @@ if detector.board.any_coral_board:
     from adafruit_blinka.microcontroller.generic_linux.sysfs_pwmout import PWMOut
 if detector.board.any_giant_board:
     from adafruit_blinka.microcontroller.generic_linux.sysfs_pwmout import PWMOut
+if detector.board.any_odroid_40_pin:
+    from adafruit_blinka.microcontroller.generic_linux.sysfs_pwmout import PWMOut