X-Git-Url: https://git.ayoreis.com/hackapet/Adafruit_Blinka_Displayio.git/blobdiff_plain/3e71b56944b2f39930bd2d50a387042a6c6d6fcc..9174c060a2059d9debc04a1254bbc516f78d0dd7:/displayio/_fourwire.py

diff --git a/displayio/_fourwire.py b/displayio/_fourwire.py
new file mode 100644
index 0000000..0aae5da
--- /dev/null
+++ b/displayio/_fourwire.py
@@ -0,0 +1,138 @@
+# SPDX-FileCopyrightText: 2020 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+"""
+`displayio.fourwire`
+================================================================================
+
+displayio for Blinka
+
+**Software and Dependencies:**
+
+* Adafruit Blinka:
+  https://github.com/adafruit/Adafruit_Blinka/releases
+
+* Author(s): Melissa LeBlanc-Williams
+
+"""
+
+import time
+from typing import Optional
+import digitalio
+import busio
+import microcontroller
+import _typing
+from ._constants import (
+    CHIP_SELECT_TOGGLE_EVERY_BYTE,
+    CHIP_SELECT_UNTOUCHED,
+    DISPLAY_COMMAND,
+    DISPLAY_DATA,
+)
+
+__version__ = "0.0.0-auto.0"
+__repo__ = "https://github.com/adafruit/Adafruit_Blinka_displayio.git"
+
+
+class FourWire:
+    """Manage updating a display over SPI four wire protocol in the background while
+    Python code runs. It doesn’t handle display initialization.
+    """
+
+    def __init__(
+        self,
+        spi_bus: busio.SPI,
+        *,
+        command: microcontroller.Pin,
+        chip_select: microcontroller.Pin,
+        reset: Optional[microcontroller.Pin] = None,
+        baudrate: int = 24000000,
+        polarity: int = 0,
+        phase: int = 0,
+    ):
+        """Create a FourWire object associated with the given pins.
+
+        The SPI bus and pins are then in use by the display until
+        displayio.release_displays() is called even after a reload. (It does this so
+        CircuitPython can use the display after your code is done.)
+        So, the first time you initialize a display bus in code.py you should call
+        :py:func`displayio.release_displays` first, otherwise it will error after the
+        first code.py run.
+        """
+        self._dc = digitalio.DigitalInOut(command)
+        self._dc.switch_to_output(value=False)
+        self._chip_select = digitalio.DigitalInOut(chip_select)
+        self._chip_select.switch_to_output(value=True)
+        self._frequency = baudrate
+        self._polarity = polarity
+        self._phase = phase
+
+        if reset is not None:
+            self._reset = digitalio.DigitalInOut(reset)
+            self._reset.switch_to_output(value=True)
+        else:
+            self._reset = None
+        self._spi = spi_bus
+
+    def _release(self):
+        self.reset()
+        self._spi.deinit()
+        self._dc.deinit()
+        self._chip_select.deinit()
+        if self._reset is not None:
+            self._reset.deinit()
+
+    def reset(self) -> None:
+        """Performs a hardware reset via the reset pin.
+        Raises an exception if called when no reset pin is available.
+        """
+        if self._reset is not None:
+            self._reset.value = False
+            time.sleep(0.001)
+            self._reset.value = True
+            time.sleep(0.001)
+
+    def send(
+        self, command, data: _typing.ReadableBuffer, *, toggle_every_byte: bool = False
+    ) -> None:
+        """
+        Sends the given command value followed by the full set of data. Display state,
+        such as vertical scroll, set via ``send`` may or may not be reset once the code is
+        done.
+        """
+        if not 0 <= command <= 255:
+            raise ValueError("Command must be an int between 0 and 255")
+        chip_select = (
+            CHIP_SELECT_TOGGLE_EVERY_BYTE
+            if toggle_every_byte
+            else CHIP_SELECT_UNTOUCHED
+        )
+        self._begin_transaction()
+        self._send(DISPLAY_COMMAND, chip_select, command)
+        self._send(DISPLAY_DATA, chip_select, data)
+        self._end_transaction()
+
+    def _send(self, data_type: int, chip_select: int, data: _typing.ReadableBuffer):
+        self._dc.value = data_type == DISPLAY_DATA
+        if chip_select == CHIP_SELECT_TOGGLE_EVERY_BYTE:
+            for byte in data:
+                self._spi.write(bytes([byte]))
+                self._chip_select.value = True
+                time.sleep(0.000001)
+                self._chip_select.value = False
+        else:
+            self._spi.write(data)
+
+    def _begin_transaction(self):
+        """Begin the SPI transaction by locking, configuring, and setting Chip Select"""
+        while not self._spi.try_lock():
+            pass
+        self._spi.configure(
+            baudrate=self._frequency, polarity=self._polarity, phase=self._phase
+        )
+        self._chip_select.value = False
+
+    def _end_transaction(self):
+        """End the SPI transaction by unlocking and setting Chip Select"""
+        self._chip_select.value = True
+        self._spi.unlock()