X-Git-Url: https://git.ayoreis.com/hackapet/Adafruit_Blinka_Displayio.git/blobdiff_plain/09889f5e46420240ade4451f7af6f54814f8cfcd..37b04a7ad611fe0578dc3a18248a085df7abe5e1:/paralleldisplay.py

diff --git a/paralleldisplay.py b/paralleldisplay.py
deleted file mode 100644
index 4e828cc..0000000
--- a/paralleldisplay.py
+++ /dev/null
@@ -1,87 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Melissa LeBlanc-Williams for Adafruit Industries
-#
-# SPDX-License-Identifier: MIT
-
-"""
-`paralleldisplay`
-================================================================================
-
-paralleldisplay for Blinka
-
-**Software and Dependencies:**
-
-* Adafruit Blinka:
-  https://github.com/adafruit/Adafruit_Blinka/releases
-
-* Author(s): Melissa LeBlanc-Williams
-
-"""
-
-from typing import Optional
-import microcontroller
-from circuitpython_typing import ReadableBuffer
-
-__version__ = "0.0.0+auto.0"
-__repo__ = "https://github.com/adafruit/Adafruit_Blinka_displayio.git"
-
-
-class ParallelBus:
-    """Manage updating a display over 8-bit parallel bus in the background while Python code
-    runs. This protocol may be refered to as 8080-I Series Parallel Interface in datasheets.
-    It doesn't handle display initialization.
-    """
-
-    def __init__(
-        self,
-        *,
-        data0: microcontroller.Pin,
-        command: microcontroller.Pin,
-        chip_select: microcontroller.Pin,
-        write: microcontroller.Pin,
-        read: Optional[microcontroller.Pin],
-        reset: Optional[microcontroller.Pin] = None,
-        frequency: int = 30000000,
-    ):
-        # pylint: disable=unnecessary-pass
-        """Create a ParallelBus object associated with the given pins. The
-        bus is inferred from data0 by implying the next 7 additional pins on a given GPIO
-        port.
-
-        The parallel bus and pins are then in use by the display until
-        displayio.release_displays() is called even after a reload. (It does this so
-        CircuitPython can use the display after your code is done.) So, the first time you
-        initialize a display bus in code.py you should call
-        :py:func`displayio.release_displays` first, otherwise it will error after the first
-        code.py run.
-        """
-        pass
-
-    def reset(self) -> None:
-        """Performs a hardware reset via the reset pin. Raises an exception if called when
-        no reset pin is available.
-        """
-        raise NotImplementedError("ParallelBus reset has not been implemented yet")
-
-    def send(self, command: int, data: ReadableBuffer) -> None:
-        """Sends the given command value followed by the full set of data. Display state,
-        such as vertical scroll, set via ``send`` may or may not be reset once the code is
-        done.
-        """
-        raise NotImplementedError("ParallelBus send has not been implemented yet")
-
-    def _send(
-        self,
-        _data_type: int,
-        _chip_select: int,
-        _data: ReadableBuffer,
-    ) -> None:
-        pass
-
-    def _free(self) -> bool:
-        """Attempt to free the bus and return False if busy"""
-
-    def _begin_transaction(self) -> bool:
-        pass
-
-    def _end_transaction(self) -> None:
-        pass