X-Git-Url: https://git.ayoreis.com/hackapet/Adafruit_Blinka.git/blobdiff_plain/d686d4e89cc642173ae518c6c3180110c3b961af..fb7e7bd346bc1f2a40b406b9a435da9792006e96:/src/adafruit_blinka/board/nanopi/neo.py

diff --git a/src/adafruit_blinka/board/nanopi/neo.py b/src/adafruit_blinka/board/nanopi/neo.py
new file mode 100644
index 0000000..68b5cbe
--- /dev/null
+++ b/src/adafruit_blinka/board/nanopi/neo.py
@@ -0,0 +1,49 @@
+"""Pin definitions for the NanoPi NEO Air."""
+# Enable I2C0, UART1, and SPI by adding the following lines to /boot/armbianEnv.txt
+#    overlays=usbhost2 usbhost3 spi-spidev uart1 i2c0
+#    param_spidev_spi_bus=0
+
+from adafruit_blinka.microcontroller.allwinner.h3 import pin
+
+# Left GPIOs
+D2 = pin.PA12
+D3 = pin.PA11
+D4 = pin.PG11
+D17 = pin.PA0
+D27 = pin.PA2
+D22 = pin.PA3
+D10 = pin.PC0
+D9 = pin.PC1
+D11 = pin.PC2
+
+# Right GPIOs
+D14 = pin.PG6
+D15 = pin.PG7
+D18 = pin.PA6
+D23 = pin.PG8
+D24 = pin.PG9
+D25 = pin.PA1
+D8 = pin.PC3
+
+# I2C
+SDA = D2
+SCL = D3
+
+# SPI
+SCLK = D11
+MOSI = D10
+MISO = D9
+CE0 = D8
+SCK = SCLK
+
+# Serial UART
+UART1_TX = D14
+UART1_RX = D15
+
+UART2_RX = D8
+UART2_TX = D17
+UART2_RTS = D27
+UART2_CTS = D22
+
+# PWM
+PWM1 = D4