Remove return_toml param

[hackapet/Adafruit_Blinka.git] / src / adafruit_blinka / microcontroller / starfive / JH7110 / pin.py

diff --git a/src/adafruit_blinka/microcontroller/starfive/JH7110/pin.py b/src/adafruit_blinka/microcontroller/starfive/JH7110/pin.py
index b1f07c9e8e3fb4a88106cc2b73e8b0bb2e287945..023a40eef55e5cc49e436d7998d0dd2a0bd85cfa 100644 (file)
--- a/src/adafruit_blinka/microcontroller/starfive/JH7110/pin.py
+++ b/src/adafruit_blinka/microcontroller/starfive/JH7110/pin.py
@@ -1,4 +1,4 @@
-# SPDX-FileCopyrightText: 2024 Vladimir Shtarev
+# SPDX-FileCopyrightText: 2024 Vladimir Shtarev, Jetbrains Research

 #
 # SPDX-License-Identifier: MIT
 """A Pin class for use with StarFive JH7110."""
 #
 # SPDX-License-Identifier: MIT
 """A Pin class for use with StarFive JH7110."""


@@ -23,8 +23,8 @@ class Pin:
     _value = LOW
     _mode = IN
 
     _value = LOW
     _mode = IN
 

-    def __init__(self, bcm_number):
-        self.id = bcm_number
+    def __init__(self, number):
+        self.id = number

 
     def __repr__(self):
         return str(self.id)
 
     def __repr__(self):
         return str(self.id)


@@ -34,6 +34,7 @@ class Pin:
 
     def init(self, mode=IN, pull=None):
         """Initialize the Pin"""
 
     def init(self, mode=IN, pull=None):
         """Initialize the Pin"""

+        print(self.id)

         if mode is not None:
             if mode == self.IN:
                 self._mode = self.IN
         if mode is not None:
             if mode == self.IN:
                 self._mode = self.IN


@@ -68,49 +69,47 @@ class Pin:
         return GPIO.input(self.id)
 
 
         return GPIO.input(self.id)
 
 

-D3 = Pin(3)
-D5 = Pin(5)

 D7 = Pin(7)
 D7 = Pin(7)

-D8 = Pin(9)
-D10 = Pin(10)

 D11 = Pin(11)
 D12 = Pin(12)
 D13 = Pin(13)
 D15 = Pin(15)
 D16 = Pin(16)
 D18 = Pin(18)
 D11 = Pin(11)
 D12 = Pin(12)
 D13 = Pin(13)
 D15 = Pin(15)
 D16 = Pin(16)
 D18 = Pin(18)

-D19 = Pin(19)
-D21 = Pin(21)

 D22 = Pin(22)
 D22 = Pin(22)

-D23 = Pin(23)

 D24 = Pin(24)
 D26 = Pin(26)
 D27 = Pin(27)
 D28 = Pin(28)
 D29 = Pin(29)
 D31 = Pin(31)
 D24 = Pin(24)
 D26 = Pin(26)
 D27 = Pin(27)
 D28 = Pin(28)
 D29 = Pin(29)
 D31 = Pin(31)

-D32 = Pin(32)
-D33 = Pin(33)

 D35 = Pin(35)
 D36 = Pin(36)
 D37 = Pin(37)
 D38 = Pin(38)
 D40 = Pin(40)
 # I2C
 D35 = Pin(35)
 D36 = Pin(36)
 D37 = Pin(37)
 D38 = Pin(38)
 D40 = Pin(40)
 # I2C

-I2C_SDA = D3
-I2C_SCL = D5
+I2C_SDA = Pin(3)
+I2C_SCL = Pin(5)

 
 # SPI
 
 # SPI

-SPI_MISO = D21
-SPI_MOSI = D19
-SPI_SCLK = D23
+SPI_MISO = Pin(21)
+SPI_MOSI = Pin(19)
+SPI_SCLK = Pin(23)

 
 # UART
 
 # UART

-UART_TX = D8
-UART_RX = D10
+UART_TX = Pin(8)
+UART_RX = Pin(10)
+
+# PWM, does not support pwmio
+PWM1 = Pin(32)
+PWM2 = Pin(33)

 
 # ordered as i2cId, SCL, SDA
 i2cPorts = ((0, I2C_SCL, I2C_SDA),)
 
 # ordered as spiId, sckId, mosiId, misoId
 spiPorts = ((0, SPI_SCLK, SPI_MOSI, SPI_MISO),)
 
 # ordered as i2cId, SCL, SDA
 i2cPorts = ((0, I2C_SCL, I2C_SDA),)
 
 # ordered as spiId, sckId, mosiId, misoId
 spiPorts = ((0, SPI_SCLK, SPI_MOSI, SPI_MISO),)

+
+# ordered as uartId, txId, rxId
+uartPorts = ((0, UART_TX, UART_RX),)