Added Pine64 Board and fixed Pin Definitions

[hackapet/Adafruit_Blinka.git] / src / busio.py

diff --git a/src/busio.py b/src/busio.py
index b478ec06c6a37cdef99720b71712607e1f0d0253..3e85335917252d083d99fdb41e7338f0d2362209 100755 (executable)
--- a/src/busio.py
+++ b/src/busio.py
@@ -21,11 +21,15 @@ class I2C(Lockable):
         self.deinit()
         if detector.board.ftdi_ft232h:
             from adafruit_blinka.microcontroller.ft232h.i2c import I2C
         self.deinit()
         if detector.board.ftdi_ft232h:
             from adafruit_blinka.microcontroller.ft232h.i2c import I2C

-            self._i2c = I2C()
+            self._i2c = I2C(frequency=frequency)

             return
         elif detector.board.binho_nova:
             from adafruit_blinka.microcontroller.nova.i2c import I2C
             return
         elif detector.board.binho_nova:
             from adafruit_blinka.microcontroller.nova.i2c import I2C

-            self._i2c = I2C()
+            self._i2c = I2C(frequency=frequency)
+            return
+        elif detector.board.microchip_mcp2221:
+            from adafruit_blinka.microcontroller.mcp2221.i2c import I2C
+            self._i2c = I2C(frequency=frequency)

             return
         elif detector.board.any_embedded_linux:
             from adafruit_blinka.microcontroller.generic_linux.i2c import I2C as _I2C
             return
         elif detector.board.any_embedded_linux:
             from adafruit_blinka.microcontroller.generic_linux.i2c import I2C as _I2C


@@ -33,9 +37,12 @@ class I2C(Lockable):
             from machine import I2C as _I2C
         from microcontroller.pin import i2cPorts
         for portId, portScl, portSda in i2cPorts:
             from machine import I2C as _I2C
         from microcontroller.pin import i2cPorts
         for portId, portScl, portSda in i2cPorts:

-            if scl == portScl and sda == portSda:
-                self._i2c = _I2C(portId, mode=_I2C.MASTER, baudrate=frequency)
-                break
+            try:
+                if scl == portScl and sda == portSda:
+                    self._i2c = _I2C(portId, mode=_I2C.MASTER, baudrate=frequency)
+                    break
+            except RuntimeError:
+                pass

         else:
             raise ValueError(
                 "No Hardware I2C on (scl,sda)={}\nValid I2C ports: {}".format((scl, sda), i2cPorts)
         else:
             raise ValueError(
                 "No Hardware I2C on (scl,sda)={}\nValid I2C ports: {}".format((scl, sda), i2cPorts)


@@ -123,7 +130,7 @@ class SPI(Lockable):
             from adafruit_blinka.microcontroller.am335x.pin import Pin
             from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
         elif board_id == ap_board.ORANGE_PI_PC or board_id == ap_board.ORANGE_PI_R1 or board_id == ap_board.ORANGE_PI_ZERO:
             from adafruit_blinka.microcontroller.am335x.pin import Pin
             from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
         elif board_id == ap_board.ORANGE_PI_PC or board_id == ap_board.ORANGE_PI_R1 or board_id == ap_board.ORANGE_PI_ZERO:

-            from adafruit_blinka.microcontroller.allwinner_h3.pin import Pin
+            from adafruit_blinka.microcontroller.allwinner.h3.pin import Pin

             from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
         elif board_id == ap_board.GIANT_BOARD:
             from adafruit_blinka.microcontroller.sama5.pin import Pin
             from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
         elif board_id == ap_board.GIANT_BOARD:
             from adafruit_blinka.microcontroller.sama5.pin import Pin


@@ -149,12 +156,18 @@ class SPI(Lockable):
         elif board_id == ap_board.JETSON_XAVIER:
             from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
             from adafruit_blinka.microcontroller.tegra.t194.pin import Pin
         elif board_id == ap_board.JETSON_XAVIER:
             from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
             from adafruit_blinka.microcontroller.tegra.t194.pin import Pin

+        elif board_id == ap_board.PINE64:
+            from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+            from adafruit_blinka.microcontroller.allwinner.a64.pin import Pin

         elif detector.board.ftdi_ft232h:
             from adafruit_blinka.microcontroller.ft232h.spi import SPI as _SPI
             from adafruit_blinka.microcontroller.ft232h.pin import Pin
         elif detector.board.binho_nova:
             from adafruit_blinka.microcontroller.nova.spi import SPI as _SPI
             from adafruit_blinka.microcontroller.nova.pin import Pin
         elif detector.board.ftdi_ft232h:
             from adafruit_blinka.microcontroller.ft232h.spi import SPI as _SPI
             from adafruit_blinka.microcontroller.ft232h.pin import Pin
         elif detector.board.binho_nova:
             from adafruit_blinka.microcontroller.nova.spi import SPI as _SPI
             from adafruit_blinka.microcontroller.nova.pin import Pin

+        elif board_id == ap_board.PINE64 or board_id == ap_board.PINEBOOK or board_id == ap_board.PINEPHONE:
+            from adafruit_blinka.microcontroller.allwinner.a64.pin import Pin
+            from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI

         else:
             from machine import SPI as _SPI
             from machine import Pin
         else:
             from machine import SPI as _SPI
             from machine import Pin