Add support for Repka Pi-3 H5 and Pi-4 H6 boards

[hackapet/Adafruit_Blinka.git] / src / adafruit_blinka / board / repkapi / repka_pi_4.py

diff --git a/src/adafruit_blinka/board/repkapi/repka_pi_4.py b/src/adafruit_blinka/board/repkapi/repka_pi_4.py
new file mode 100644 (file)
index 0000000..4d776bd
--- /dev/null
+++ b/src/adafruit_blinka/board/repkapi/repka_pi_4.py
@@ -0,0 +1,56 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+# copied from Allwinner H6 to be updated later
+
+"""Repka Pi 4 (Allwinner H6) Pin Names"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+# TODO: check and update all pins after board release
+PC16 = Pin((1, 79))
+
+PD14 = Pin((1, 110))
+PD15 = Pin((1, 111))
+PD16 = Pin((1, 112))
+PD17 = Pin((1, 113))
+PD18 = Pin((1, 114))
+PD19 = Pin((1, 115))
+UART2_TX = PD19
+PD20 = Pin((1, 116))
+UART2_RX = PD20
+PD21 = Pin((1, 117))
+PD22 = Pin((1, 118))
+PD23 = Pin((1, 119))
+PD24 = Pin((1, 120))
+PD25 = Pin((1, 121))
+TWI0_SCL = PD25
+PD26 = Pin((1, 122))
+TWI0_SDA = PD26
+
+PG10 = Pin((1, 202))
+PG11 = Pin((1, 203))
+PG12 = Pin((1, 204))
+PG13 = Pin((1, 205))
+PG14 = Pin((1, 206))
+
+PH2 = Pin((1, 226))
+PH3 = Pin((1, 227))
+SPI1_CS = PH3
+PH4 = Pin((1, 228))
+SPI1_SCLK = PH4
+PH5 = Pin((1, 229))
+SPI1_MOSI = PH5
+PH6 = Pin((1, 230))
+SPI1_MISO = PH6
+PH8 = Pin((1, 230))
+PH9 = Pin((1, 231))
+
+PL2 = Pin((0, 2))
+PL3 = Pin((0, 3))
+PL8 = Pin((0, 8))
+PL9 = Pin((0, 9))
+PL10 = Pin((0, 10))
+
+i2cPorts = ((0, TWI0_SCL, TWI0_SDA),)
+spiPorts = ((1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),)
+uartPorts = ((2, UART2_TX, UART2_RX),)