rename microcontroller.{beaglebone_black,raspi_23} to {am335x,bcm283x}

[hackapet/Adafruit_Blinka.git] / src / adafruit_blinka / microcontroller / beaglebone_black / pin.py

diff --git a/src/adafruit_blinka/microcontroller/beaglebone_black/pin.py b/src/adafruit_blinka/microcontroller/beaglebone_black/pin.py
deleted file mode 100644 (file)
index 7dcdbce..0000000
--- a/src/adafruit_blinka/microcontroller/beaglebone_black/pin.py
+++ /dev/null
@@ -1,81 +0,0 @@
-import Adafruit_BBIO.GPIO as GPIO
-
-# Pins dont exist in CPython so...lets make our own!
-class Pin:
-    IN = 0
-    OUT = 1
-    LOW = 0
-    HIGH = 1
-    PULL_NONE = 0
-    PULL_UP = 1
-    PULL_DOWN = 2
-    
-    id = None
-    _value = LOW
-    _mode = IN
-    
-    def __init__(self, pin_name):
-        self.id = pin_name
-
-    def __repr__(self):
-        return str(self.id)
-
-    def __eq__(self, other):
-        return self.id == other
-
-    def init(self, mode=IN, pull=None):
-        if mode != None:
-            if mode == self.IN:
-                self._mode = self.IN
-                GPIO.setup(self.id, GPIO.IN)
-            elif mode == self.OUT:
-                self._mode = self.OUT
-                GPIO.setup(self.id, GPIO.OUT)
-            else:
-                raise RuntimeError("Invalid mode for pin: %s" % self.id)
-        if pull != None:
-            if self._mode != self.IN:
-                raise RuntimeError("Cannot set pull resistor on output")
-            if pull == self.PULL_UP:
-                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_UP)
-            elif pull == self.PULL_DOWN:
-                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
-            else:
-                raise RuntimeError("Invalid pull for pin: %s" % self.id)       
-
-    def value(self, val=None):
-        if val != None:
-            if val == self.LOW:
-                self._value = val
-                GPIO.output(self.id, val)
-            elif val == self.HIGH:
-                self._value = val
-                GPIO.output(self.id, val)
-            else:
-                raise RuntimeError("Invalid value for pin")
-        else:
-            return GPIO.input(self.id)
-
-P8_13 = Pin('P8_13')
-P8_19 = Pin('P8_19')
-
-P9_12 = Pin('P9_12')
-
-
-USR0 = Pin('USR0')
-USR1 = Pin('USR1')
-USR2 = Pin('USR2')
-USR3 = Pin('USR3')
-
-# ordered as spiId, sckId, mosiId, misoId
-spiPorts = ()
-
-# ordered as uartId, txId, rxId
-uartPorts = (
-    (),
-)
-
-i2cPorts = (
-    (),
-)
-