Google Coral support for the i2c, spi, and GPIO pins. uart #3 not available and remai...

[hackapet/Adafruit_Blinka.git] / src / board.py

diff --git a/src/board.py b/src/board.py
index d4e6be01c92bdca568135e7a25a95f6952cd4290..babc5e986107791a19daf223f72d91a41bc092ab 100755 (executable)
--- a/src/board.py
+++ b/src/board.py
@@ -29,21 +29,68 @@ See `CircuitPython:board` in CircuitPython for more details.
 """
 import sys
 
-from adafruit_blinka.agnostic import board_id
+from adafruit_blinka.agnostic import board_id, detector
+import adafruit_platformdetect.board as ap_board
 
-if board_id == "feather_huzzah":
+# pylint: disable=wildcard-import,unused-wildcard-import,ungrouped-imports
+
+if board_id == ap_board.FEATHER_HUZZAH:
     from adafruit_blinka.board.feather_huzzah import *
-elif board_id == "nodemcu":
+
+elif board_id == ap_board.NODEMCU:
     from adafruit_blinka.board.nodemcu import *
-elif board_id == "pyboard":
+
+elif board_id == ap_board.PYBOARD:
     from adafruit_blinka.board.pyboard import *
-elif board_id == "raspi_2" or board_id == "raspi_3":
-    from adafruit_blinka.board.raspi_23 import *
-elif board_id == "beaglebone_black":
+
+elif detector.board.any_raspberry_pi_40_pin:
+    from adafruit_blinka.board.raspi_40pin import *
+
+elif detector.board.RASPBERRY_PI_B_REV1:
+    from adafruit_blinka.board.raspi_1b_rev1 import *
+
+elif detector.board.RASPBERRY_PI_B_REV2:
+    from adafruit_blinka.board.raspi_1b_rev2 import *
+
+elif board_id == ap_board.BEAGLEBONE_BLACK:
     from adafruit_blinka.board.beaglebone_black import *
-elif board_id == "orangepipc":
+
+elif board_id == ap_board.BEAGLEBONE_POCKETBEAGLE:
+    from adafruit_blinka.board.beaglebone_pocketbeagle import *
+
+elif board_id == ap_board.ORANGE_PI_PC:
     from adafruit_blinka.board.orangepipc import *
+
+elif board_id == ap_board.GIANT_BOARD:
+    from adafruit_blinka.board.giantboard import *
+
+elif board_id == ap_board.JETSON_TX1:
+    from adafruit_blinka.board.jetson_tx1 import *
+
+elif board_id == ap_board.JETSON_TX2:
+    from adafruit_blinka.board.jetson_tx2 import *
+
+elif board_id == ap_board.JETSON_XAVIER:
+    from adafruit_blinka.board.jetson_xavier import *
+
+elif board_id == ap_board.JETSON_NANO:
+    from adafruit_blinka.board.jetson_nano import *
+
+elif board_id == ap_board.CORAL_EDGE_TPU_DEV:
+    from adafruit_blinka.board.coral_edge_tpu import *
+
 elif "sphinx" in sys.modules:
     pass
+
 else:
     raise NotImplementedError("Board not supported")
+
+def I2C():
+    """The singleton I2C interface"""
+    import busio
+    return busio.I2C(SCL, SDA)
+
+def SPI():
+    """The singleton SPI interface"""
+    import busio
+    return busio.SPI(SCLK, MOSI, MISO)