Change PINs to OrangePI R1 spec

[hackapet/Adafruit_Blinka.git] / src / adafruit_blinka / microcontroller / allwinner_h3 / pin.py

diff --git a/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py b/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
index 137b10f73c51cca0af497c734b59bfdd97feff3b..44241a3689effc78ea8d9508173619c7bd08080d 100644 (file)
--- a/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
+++ b/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
@@ -4,17 +4,13 @@ PA0 = Pin(0)
 UART2_TX = PA0
 PA1 = Pin(1)
 UART2_RX = PA1
 UART2_TX = PA0
 PA1 = Pin(1)
 UART2_RX = PA1

-PA2 = Pin(2)
-PA3 = Pin(3)

 PA6 = Pin(6)
 PA7 = Pin(7)
 PA6 = Pin(6)
 PA7 = Pin(7)

-PA8 = Pin(8)
-PA9 = Pin(9)

 PA10 = Pin(10)
 PA10 = Pin(10)

-PA11 = Pin(11)
-TWI0_SCL = PA11
-PA12 = Pin(12)
-TWI0_SDA = PA12
+PA11 = Pin(8)
+SDA = PA11
+PA12 = Pin(9)
+SCL = PA12

 PA13 = Pin(13)
 UART3_TX = PA13
 PA14 = Pin(14)
 PA13 = Pin(13)
 UART3_TX = PA13
 PA14 = Pin(14)


@@ -52,9 +48,8 @@ PG12 = Pin(204)
 PG13 = Pin(205)
 
 
 PG13 = Pin(205)
 
 

-i2cPorts = ( (0, TWI0_SCL, TWI0_SDA), )
+i2cPorts = ( (0, SCL, SDA), )

 # ordered as spiId, sckId, mosiId, misoId
 spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), )
 # ordered as uartId, txId, rxId
 # ordered as spiId, sckId, mosiId, misoId
 spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), )
 # ordered as uartId, txId, rxId

-uartPorts = ( (1, UART1_TX, UART1_RX), 
-              (3, UART3_TX, UART3_RX), )
+uartPorts = ( (3, UART3_TX, UART3_RX), )