Add support for amlogic s905x3

diff --git a/src/adafruit_blinka/microcontroller/amlogic/s905x3/__init__.py b/src/adafruit_blinka/microcontroller/amlogic/s905x3/__init__.py
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/src/adafruit_blinka/microcontroller/amlogic/s905x3/pin.py b/src/adafruit_blinka/microcontroller/amlogic/s905x3/pin.py
new file mode 100644 (file)
index 0000000..d224aa1
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/amlogic/s905x3/pin.py
@@ -0,0 +1,85 @@
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+GPIO496 = Pin((0, 0))
+GPIO497 = Pin((0, 1))
+GPIO498 = Pin((0, 2))
+GPIO499 = Pin((0, 3))
+GPIO500 = Pin((0, 4))
+GPIO501 = Pin((0, 5))
+GPIO502 = Pin((0, 6))
+GPIO503 = Pin((0, 7))
+GPIO504 = Pin((0, 8))
+GPIO505 = Pin((0, 9))
+GPIO506 = Pin((0, 10))
+GPIO507 = Pin((0, 11))
+GPIO508 = Pin((0, 12))
+GPIO509 = Pin((0, 13))
+GPIO510 = Pin((0, 14))
+GPIO511 = Pin((0, 15))
+
+GPIO17 = Pin((1, 17))
+GPIO18 = Pin((1, 18))
+GPIO19 = Pin((1, 19))
+GPIO20 = Pin((1, 20))
+GPIO21 = Pin((1, 21))
+GPIO22 = Pin((1, 22))
+GPIO23 = Pin((1, 23))
+GPIO24 = Pin((1, 24))
+GPIO25 = Pin((1, 25))
+
+GPIO460 = Pin((1, 50))
+GPIO461 = Pin((1, 51))
+GPIO462 = Pin((1, 52))
+GPIO463 = Pin((1, 53))
+GPIO464 = Pin((1, 54))
+GPIO465 = Pin((1, 55))
+GPIO466 = Pin((1, 56))
+GPIO467 = Pin((1, 57))
+GPIO468 = Pin((1, 58))
+GPIO469 = Pin((1, 59))
+GPIO470 = Pin((1, 60))
+GPIO472 = Pin((1, 62))
+GPIO471 = Pin((1, 61))
+GPIO472 = Pin((1, 62))
+GPIO473 = Pin((1, 63))
+GPIO474 = Pin((1, 64))
+GPIO475 = Pin((1, 65))
+GPIO476 = Pin((1, 66))
+GPIO477 = Pin((1, 67))
+GPIO478 = Pin((1, 68))
+GPIO479 = Pin((1, 69))
+GPIO480 = Pin((1, 70))
+GPIO481 = Pin((1, 71))
+GPIO482 = Pin((1, 72))
+GPIO483 = Pin((1, 73))
+GPIO484 = Pin((1, 74))
+GPIO485 = Pin((1, 75))
+GPIO486 = Pin((1, 76))
+GPIO487 = Pin((1, 77))
+GPIO488 = Pin((1, 78))
+GPIO489 = Pin((1, 79))
+GPIO490 = Pin((1, 80))
+GPIO491 = Pin((1, 81))
+GPIO492 = Pin((1, 82))
+GPIO493 = Pin((1, 83))
+GPIO494 = Pin((1, 84))
+GPIO495 = Pin((1, 85))
+
+I2C2_SDA = GPIO493
+I2C2_SCL = GPIO494
+I2C3_SDA = GPIO474
+I2C3_SCL = GPIO475
+
+UART1_TX = GPIO488
+UART1_RX = GPIO489
+
+SPI0_SCLK = GPIO487
+SPI0_MISO = GPIO485
+SPI0_MOSI = GPIO484
+SPI0_CS0 = GPIO488
+
+i2cPorts = ( (2, I2C2_SCL, I2C2_SDA), (3, I2C3_SCL, I2C3_SDA), )
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), )
+# ordered as uartId, txId, rxId
+uartPorts = ( (1, UART1_TX, UART1_RX), )

diff --git a/src/digitalio.py b/src/digitalio.py
index 29b77a1a4a629a6251a982e6888c168b32e92582..a29771cdf59dffbef9520bf1013cf4795c195214 100755 (executable)
--- a/src/digitalio.py
+++ b/src/digitalio.py
@@ -27,6 +27,8 @@ elif detector.chip.T194:
     from adafruit_blinka.microcontroller.tegra.t194.pin import Pin
 elif detector.chip.S905:
     from adafruit_blinka.microcontroller.amlogic.s905.pin import Pin
     from adafruit_blinka.microcontroller.tegra.t194.pin import Pin
 elif detector.chip.S905:
     from adafruit_blinka.microcontroller.amlogic.s905.pin import Pin

+elif detector.chip.S905X3:
+    from adafruit_blinka.microcontroller.amlogic.s905x3.pin import Pin

 elif detector.chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import Pin
 elif detector.chip.APQ8016:
 elif detector.chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import Pin
 elif detector.chip.APQ8016:

diff --git a/src/microcontroller/__init__.py b/src/microcontroller/__init__.py
index 108d527bca27a6e4619480e2bbc52c291587e5ba..a7ab0a38025d6434f4ecc7abb0548f33b9751492 100755 (executable)
--- a/src/microcontroller/__init__.py
+++ b/src/microcontroller/__init__.py
@@ -44,6 +44,8 @@ elif chip_id == ap_chip.T194:
     from adafruit_blinka.microcontroller.tegra.t194 import *
 elif chip_id == ap_chip.S905:
     from adafruit_blinka.microcontroller.amlogic.s905.pin import *
     from adafruit_blinka.microcontroller.tegra.t194 import *
 elif chip_id == ap_chip.S905:
     from adafruit_blinka.microcontroller.amlogic.s905.pin import *

+elif chip_id == ap_chip.S905X3:
+    from adafruit_blinka.microcontroller.amlogic.s905x3.pin import *

 elif chip_id == ap_chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import *
 elif chip_id == ap_chip.APQ8016:
 elif chip_id == ap_chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import *
 elif chip_id == ap_chip.APQ8016:

diff --git a/src/microcontroller/pin.py b/src/microcontroller/pin.py
index e71dd2acd12c44cd77a7e267ee8d1569a340c382..45b77030cd9d7cf0d24569c1c7466fddd29a8161 100755 (executable)
--- a/src/microcontroller/pin.py
+++ b/src/microcontroller/pin.py
@@ -26,6 +26,8 @@ elif chip_id == ap_chip.T194:
     from adafruit_blinka.microcontroller.tegra.t194.pin import *
 elif chip_id == ap_chip.S905:
     from adafruit_blinka.microcontroller.amlogic.s905.pin import *
     from adafruit_blinka.microcontroller.tegra.t194.pin import *
 elif chip_id == ap_chip.S905:
     from adafruit_blinka.microcontroller.amlogic.s905.pin import *

+elif chip_id == ap_chip.S905X3:
+    from adafruit_blinka.microcontroller.amlogic.s905x3.pin import *

 elif chip_id == ap_chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import *
 elif chip_id == ap_chip.APQ8016:
 elif chip_id == ap_chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import *
 elif chip_id == ap_chip.APQ8016: