Add files via upload

diff --git a/src/adafruit_blinka/board/bananapi/__pycache__/bpim2zero.cpython-37.pyc b/src/adafruit_blinka/board/bananapi/__pycache__/bpim2zero.cpython-37.pyc
new file mode 100644 (file)
index 0000000..3660a21
Binary files /dev/null and b/src/adafruit_blinka/board/bananapi/__pycache__/bpim2zero.cpython-37.pyc differ

diff --git a/src/adafruit_blinka/board/bananapi/bpim2zero.py b/src/adafruit_blinka/board/bananapi/bpim2zero.py
new file mode 100644 (file)
index 0000000..9b68f1b
--- /dev/null
+++ b/src/adafruit_blinka/board/bananapi/bpim2zero.py
@@ -0,0 +1,36 @@
+"""Pin definitions for the Banana Pi M2 Zero."""
+
+# The Banana Pi M2 Zero uses the AllWinner H2 SoC, but pins
+# are the same as the AllWinner H3 SoC, so we import those
+from adafruit_blinka.microcontroller.allwinner.h3 import pin
+
+PA12 = pin.PA12
+SDA = pin.PA12
+PA11 = pin.PA11
+SCL = pin.PA11
+PA6 = pin.PA6
+PWM1 = pin.PA6
+PA1 = pin.PA1
+UART2_RX = pin.PA1
+PA0 = pin.PA0
+UART2_TX = pin.PA0
+PA3 = pin.PA3
+UART2_CTS = pin.PA3
+PA10 = pin.PA10
+
+PA13 = pin.PA13
+SPI1_CS = pin.PA13
+PA14 = pin.PA14
+SPI1_CLK = pin.PA14
+PA2 = pin.PA2
+UART2_RTS = pin.PA2
+PA18 = pin.PA18
+TWI1_SCK = pin.PA18
+PG6 = pin.PG6
+UART1_TX = pin.PG6
+PG7 = pin.PG7
+UART1_RX = pin.PG7
+
+SCLK = pin.PA14
+MOSI = pin.PA15
+MISO = pin.PA16