Run Black with py3.5, remove unused imports

diff --git a/src/adafruit_blinka/microcontroller/bcm2711/pin.py b/src/adafruit_blinka/microcontroller/bcm2711/pin.py
index 7fe59960d04995fca0fdbe92b9a5d509d24aed04..48fe98af22fffb22fb847574d721b969dc535e4f 100644 (file)
--- a/src/adafruit_blinka/microcontroller/bcm2711/pin.py
+++ b/src/adafruit_blinka/microcontroller/bcm2711/pin.py
@@ -1,6 +1,5 @@
 """Broadcom BCM283x pin names"""
 import RPi.GPIO as GPIO
 """Broadcom BCM283x pin names"""
 import RPi.GPIO as GPIO

-from adafruit_blinka.agnostic import detector

 
 GPIO.setmode(GPIO.BCM)  # Use BCM pins D4 = GPIO #4
 GPIO.setwarnings(False)  # shh!
 
 GPIO.setmode(GPIO.BCM)  # Use BCM pins D4 = GPIO #4
 GPIO.setwarnings(False)  # shh!

diff --git a/src/adafruit_blinka/microcontroller/bcm283x/pin.py b/src/adafruit_blinka/microcontroller/bcm283x/pin.py
index 423435e00b6af82a9753f0245bdb4748b51abecf..5022366a7d4dd1b299b5b17301d5b73beb0d2178 100644 (file)
--- a/src/adafruit_blinka/microcontroller/bcm283x/pin.py
+++ b/src/adafruit_blinka/microcontroller/bcm283x/pin.py
@@ -1,6 +1,5 @@
 """Broadcom BCM283x pin names"""
 import RPi.GPIO as GPIO
 """Broadcom BCM283x pin names"""
 import RPi.GPIO as GPIO

-from adafruit_blinka.agnostic import detector

 
 GPIO.setmode(GPIO.BCM)  # Use BCM pins D4 = GPIO #4
 GPIO.setwarnings(False)  # shh!
 
 GPIO.setmode(GPIO.BCM)  # Use BCM pins D4 = GPIO #4
 GPIO.setwarnings(False)  # shh!

diff --git a/src/microcontroller/__init__.py b/src/microcontroller/__init__.py
index d9ca071a7b43ab38da57b157f59fc2cf03368d9f..03253b3b6fc820d48848b48a520cbb9af8b49aa0 100755 (executable)
--- a/src/microcontroller/__init__.py
+++ b/src/microcontroller/__init__.py
@@ -57,7 +57,11 @@ elif chip_id == ap_chip.STM32F405:
 elif chip_id == ap_chip.RP2040:
     from adafruit_blinka.microcontroller.rp2040 import *
 elif chip_id == ap_chip.BCM2XXX:
 elif chip_id == ap_chip.RP2040:
     from adafruit_blinka.microcontroller.rp2040 import *
 elif chip_id == ap_chip.BCM2XXX:

-    if board_id in ["RASPBERRY_PI_4B", "RASPBERRY_PI_400", "RASPBERRY_PI_CM4",]:
+    if board_id in [
+        "RASPBERRY_PI_4B",
+        "RASPBERRY_PI_400",
+        "RASPBERRY_PI_CM4",
+    ]:

         from adafruit_blinka.microcontroller.bcm2711.pin import *
     else:
         from adafruit_blinka.microcontroller.bcm283x.pin import *
         from adafruit_blinka.microcontroller.bcm2711.pin import *
     else:
         from adafruit_blinka.microcontroller.bcm283x.pin import *

diff --git a/src/microcontroller/pin.py b/src/microcontroller/pin.py
index 15e015227bfab40a985cd68ab959fcb9c27ddac3..149c342243cbb2dbb592ae2e87db5151e9d61af8 100755 (executable)
--- a/src/microcontroller/pin.py
+++ b/src/microcontroller/pin.py
@@ -13,7 +13,11 @@ elif chip_id == ap_chip.STM32F405:
 elif chip_id == ap_chip.RP2040:
     from adafruit_blinka.microcontroller.rp2040.pin import *
 elif chip_id == ap_chip.BCM2XXX:
 elif chip_id == ap_chip.RP2040:
     from adafruit_blinka.microcontroller.rp2040.pin import *
 elif chip_id == ap_chip.BCM2XXX:

-    if board_id in ["RASPBERRY_PI_4B", "RASPBERRY_PI_400", "RASPBERRY_PI_CM4",]:
+    if board_id in [
+        "RASPBERRY_PI_4B",
+        "RASPBERRY_PI_400",
+        "RASPBERRY_PI_CM4",
+    ]:

         from adafruit_blinka.microcontroller.bcm2711.pin import *
     else:
         from adafruit_blinka.microcontroller.bcm283x.pin import *
         from adafruit_blinka.microcontroller.bcm2711.pin import *
     else:
         from adafruit_blinka.microcontroller.bcm283x.pin import *