Added support to SeeedStudio Odyssey X86J4105 SBC

diff --git a/src/adafruit_blinka/board/x86j4105.py b/src/adafruit_blinka/board/x86j4105.py
new file mode 100644 (file)
index 0000000..a107135
--- /dev/null
+++ b/src/adafruit_blinka/board/x86j4105.py
@@ -0,0 +1,50 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Pin definitions for the Odyssey X86j4105."""
+
+from adafruit_blinka.microcontroller.pentium.j4105 import pin
+
+D0 = pin.GPIO388
+D1 = pin.GPIO389
+D2 = pin.GPIO386
+D3 = pin.GPIO387
+D4 = pin.GPIO337
+D5 = pin.GPIO415
+D6 = pin.GPIO416
+D7 = pin.GPIO357
+D8 = pin.GPIO356
+D9 = pin.GPIO358
+D10 = pin.GPIO359
+D11 = pin.GPIO355
+D12 = pin.GPIO391
+D13 = pin.GPIO417
+D14 = pin.GPIO493
+D15 = pin.GPIO492
+D16 = pin.GPIO410
+D17 = pin.GPIO364
+D18 = pin.GPIO338
+D19 = pin.GPIO339
+D20 = pin.GPIO340
+D21 = pin.GPIO341
+D22 = pin.GPIO413
+D23 = pin.GPIO421
+D24 = pin.GPIO422
+D25 = pin.GPIO390
+D26 = pin.GPIO419
+D27 = pin.GPIO412
+
+SDA = D2
+SCL = D3
+
+SCL2 = D1
+SDA2 = D0
+
+SCLK = D11
+MOSI = D10
+MISO = D9
+CS = D8
+SCK = SCLK
+
+UART_TX = D14
+UART_RX = D15

diff --git a/src/adafruit_blinka/microcontroller/pentium/j4105/__init__.py b/src/adafruit_blinka/microcontroller/pentium/j4105/__init__.py
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/src/adafruit_blinka/microcontroller/pentium/j4105/pin.py b/src/adafruit_blinka/microcontroller/pentium/j4105/pin.py
new file mode 100644 (file)
index 0000000..d68bc98
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/pentium/j4105/pin.py
@@ -0,0 +1,56 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Intel Celeron j4105 pin names"""
+
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+GPIO388 = Pin((1,36))
+GPIO389 = Pin((1,37))
+GPIO386 = Pin((1,34))
+GPIO387 = Pin((1,35))
+GPIO337 = Pin((2,5))
+GPIO415 = Pin((1,63))
+GPIO416 = Pin((1,64))
+GPIO357 = Pin((1,5))
+GPIO356 = Pin((1,4))
+GPIO358 = Pin((1,6))
+GPIO359 = Pin((1,7))
+GPIO355 = Pin((1,3))
+GPIO391 = Pin((1,39))
+GPIO417 = Pin((1,65))
+GPIO493 = Pin((0,61))
+GPIO492 = Pin((0,60))
+GPIO410 = Pin((1,58))
+GPIO364 = Pin((1,12))
+GPIO338 = Pin((2,6))
+GPIO339 = Pin((2,7))
+GPIO340 = Pin((2,8))
+GPIO341 = Pin((2,9))
+GPIO413 = Pin((1,61))
+GPIO421 = Pin((1,69))
+GPIO422 = Pin((1,70))
+GPIO390 = Pin((1,38))
+GPIO419 = Pin((1,67))
+GPIO412 = Pin((1,60))
+
+SPI0_SCLK = GPIO355
+SPI0_MOSI = GPIO359
+SPI0_MISO = GPIO358
+SPI0_FSO = GPIO356
+SPI0_FS1 = GPIO357
+
+UART0_TX = GPIO493
+UART0_RX = GPIO492
+
+I2C5_SDA = GPIO386
+I2C5_SCL = GPIO387
+
+I2C6_SDA = GPIO388
+I2C6_SCL = GPIO389
+
+i2cPorts = ((2, I2C5_SCL, I2C5_SDA),(3, I2C6_SCL, I2C6_SDA),)
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),)
+# ordered as uartId, txId, rxId
+uartPorts = ((0, UART0_TX, UART0_RX),)

diff --git a/src/board.py b/src/board.py
index bde2686efeeaffd04de8592dd2b56efc9e0a9afe..fce4a5132edd0892b9aa57849abb06178f716b6d 100644 (file)
--- a/src/board.py
+++ b/src/board.py
@@ -238,6 +238,9 @@ elif board_id == ap_board.ROCK_PI_E:
 elif board_id == ap_board.UDOO_X86:
     from adafruit_blinka.board.udoo_x86ultra import *
 
+elif board_id == ap_board.ODYSSEY_X86J4105:
+    from adafruit_blinka.board.x86j4105 import *
+
 elif board_id == ap_board.STM32MP157C_DK2:
     from adafruit_blinka.board.stm32.stm32mp157c_dk2 import *
 

diff --git a/src/digitalio.py b/src/digitalio.py
index 69e1af6d841fedbc348d6d69b403219cfb81c1e5..cbd0ae235dcb69ab61903fc53d79decf2235d966 100644 (file)
--- a/src/digitalio.py
+++ b/src/digitalio.py
@@ -73,6 +73,8 @@ elif detector.chip.RK3328:
     from adafruit_blinka.microcontroller.rockchip.rk3328.pin import Pin
 elif detector.chip.PENTIUM_N3710:
     from adafruit_blinka.microcontroller.pentium.n3710.pin import Pin
+elif detector.chip.ATOM_J4105:
+    from adafruit_blinka.microcontroller.pentium.j4105.pin import Pin
 elif detector.chip.STM32MP157:
     from adafruit_blinka.microcontroller.stm32.stm32mp157.pin import Pin
 elif detector.chip.MT8167:

diff --git a/src/microcontroller/__init__.py b/src/microcontroller/__init__.py
index 5858481073a82f6741f2fe6c9047a648772320e0..6015cd9dd787563608b84dd8c9b62c294fb66c05 100644 (file)
--- a/src/microcontroller/__init__.py
+++ b/src/microcontroller/__init__.py
@@ -118,6 +118,8 @@ elif chip_id == ap_chip.FT2232H:
     from adafruit_blinka.microcontroller.ftdi_mpsse.ft2232h import *
 elif chip_id == ap_chip.PENTIUM_N3710:
     from adafruit_blinka.microcontroller.pentium.n3710 import *
+elif chip_id == ap_chip.ATOM_J4105:
+    from adafruit_blinka.microcontroller.pentium.j4105 import *
 elif chip_id == ap_chip.STM32MP157:
     from adafruit_blinka.microcontroller.stm32.stm32mp157 import *
 elif chip_id == ap_chip.MT8167:

diff --git a/src/microcontroller/pin.py b/src/microcontroller/pin.py
index d13437a45dd33c7cfd3a6b3c8fe1d379b3d53ccc..e7f7765d067fcfcdcd9ec4036fcc23fc86b96a07 100644 (file)
--- a/src/microcontroller/pin.py
+++ b/src/microcontroller/pin.py
@@ -103,6 +103,8 @@ elif chip_id == ap_chip.MIPS24KEC:
     from adafruit_blinka.microcontroller.mips24kec.pin import *
 elif chip_id == ap_chip.PENTIUM_N3710:
     from adafruit_blinka.microcontroller.pentium.n3710.pin import *
+elif chip_id == ap_chip.ATOM_J4105:
+    from adafruit_blinka.microcontroller.pentium.j4105.pin import *
 elif chip_id == ap_chip.STM32MP157:
     from adafruit_blinka.microcontroller.stm32.stm32mp157.pin import *
 elif chip_id == ap_chip.MT8167: