X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/ecba441c03a58ce97b3c1c769cb9c76675abbf7f..8273fc6:/src/adafruit_blinka/microcontroller/ft232h/pin.py

diff --git a/src/adafruit_blinka/microcontroller/ft232h/pin.py b/src/adafruit_blinka/microcontroller/ft232h/pin.py
index d9763d2..94b8e14 100644
--- a/src/adafruit_blinka/microcontroller/ft232h/pin.py
+++ b/src/adafruit_blinka/microcontroller/ft232h/pin.py
@@ -1,3 +1,6 @@
+"""FT232H pin names"""
+
+
 class Pin:
     """A basic Pin class for use with FT232H."""
 
@@ -12,9 +15,13 @@ class Pin:
         # setup GPIO controller if not done yet
         # use one provided by I2C as default
         if not Pin.ft232h_gpio:
+            # pylint: disable=import-outside-toplevel
             from pyftdi.i2c import I2cController
+
+            # pylint: enable=import-outside-toplevel
+
             i2c = I2cController()
-            i2c.configure("ftdi:///1")
+            i2c.configure("ftdi://ftdi:ft232h/1")
             Pin.ft232h_gpio = i2c.get_gpio()
         # check if pin is valid
         if pin_id:
@@ -24,6 +31,7 @@ class Pin:
         self.id = pin_id
 
     def init(self, mode=IN, pull=None):
+        """Initialize the Pin"""
         if not self.id:
             raise RuntimeError("Can not init a None type pin.")
         # FT232H does't have configurable internal pulls?
@@ -38,6 +46,7 @@ class Pin:
         Pin.ft232h_gpio.set_direction(pin_mask, current)
 
     def value(self, val=None):
+        """Set or return the Pin Value"""
         if not self.id:
             raise RuntimeError("Can not access a None type pin.")
         current = Pin.ft232h_gpio.read(with_output=True)
@@ -45,15 +54,17 @@ class Pin:
         if val is None:
             return 1 if current & 1 << self.id != 0 else 0
         # write
-        elif val in (self.LOW, self.HIGH):
+        if val in (self.LOW, self.HIGH):
             if val == self.HIGH:
                 current |= 1 << self.id
             else:
                 current &= ~(1 << self.id)
+            # must mask out any input pins
             Pin.ft232h_gpio.write(current & Pin.ft232h_gpio.direction)
+            return None
         # release the kraken
-        else:
-            raise RuntimeError("Invalid value for pin")
+        raise RuntimeError("Invalid value for pin")
+
 
 # create pin instances for each pin
 # D0 to D3 are used by I2C/SPI
@@ -76,4 +87,4 @@ SCL = Pin()
 SDA = Pin()
 SCK = SCLK = Pin()
 MOSI = Pin()
-MISO = Pin()
\ No newline at end of file
+MISO = Pin()