X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/c4d26d1a2f3d037a20aa5ae55936baa265258edb..c50b9b5fd8fb6b28fc0ba9d928aa1a80d17724d9:/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py

diff --git a/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py b/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py
index a5a5172..831bc1a 100644
--- a/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py
+++ b/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py
@@ -7,137 +7,16 @@ try:
 except ImportError:
     raise ImportError(
         "libgpiod Python bindings not found, please install and try again! See "
-        "https://github.com/adafruit/Raspberry-Pi-Installer-Scripts/blob/master/libgpiod.sh"
+        "https://github.com/adafruit/Raspberry-Pi-Installer-Scripts/blob/main/libgpiod.py"
     ) from ImportError
 
-# pylint: disable=too-many-branches,too-many-statements
-class Pin:
-    """Pins dont exist in CPython so...lets make our own!"""
+# Versions 1.5.4 and earlier have no __version__ attribute
+if hasattr(gpiod, "__version__"):
+    version = gpiod.__version__
+else:
+    version = "1.x"
 
-    IN = 0
-    OUT = 1
-    LOW = 0
-    HIGH = 1
-    PULL_NONE = 0
-    PULL_UP = 1
-    PULL_DOWN = 2
-    _CONSUMER = "adafruit_blinka"
-
-    id = None
-    _value = LOW
-    _mode = IN
-
-    def __init__(self, pin_id):
-        self.id = pin_id
-        if isinstance(pin_id, tuple):
-            self._num = int(pin_id[1])
-            if hasattr(gpiod, "Chip"):
-                self._chip = gpiod.Chip(str(pin_id[0]), gpiod.Chip.OPEN_BY_NUMBER)
-            else:
-                self._chip = gpiod.chip(str(pin_id[0]), gpiod.chip.OPEN_BY_NUMBER)
-        else:
-            self._num = int(pin_id)
-            if hasattr(gpiod, "Chip"):
-                self._chip = gpiod.Chip("gpiochip0", gpiod.Chip.OPEN_BY_NAME)
-            else:
-                self._chip = gpiod.chip("gpiochip0", gpiod.chip.OPEN_BY_NAME)
-        self._line = None
-
-    def __repr__(self):
-        return str(self.id)
-
-    def __eq__(self, other):
-        return self.id == other
-
-    def init(self, mode=IN, pull=None):
-        """Initialize the Pin"""
-        if not self._line:
-            self._line = self._chip.get_line(int(self._num))
-            # print("init line: ", self.id, self._line)
-
-        if mode is not None:
-            if mode == self.IN:
-                flags = 0
-                self._line.release()
-                if pull is not None:
-                    if pull == self.PULL_UP:
-                        if hasattr(gpiod, "line") and hasattr(
-                            gpiod.line, "BIAS_PULL_UP"
-                        ):
-                            config = gpiod.line_request()
-                            config.consumer = self._CONSUMER
-                            config.request_type = gpiod.line.BIAS_PULL_UP
-                            self._line.request(config)
-                        else:
-                            self._line.request(
-                                consumer=self._CONSUMER,
-                                type=gpiod.LINE_REQ_DIR_IN,
-                                flags=flags,
-                            )
-                            raise NotImplementedError(
-                                "Internal pullups not supported in this version of libgpiod, "
-                                "use physical resistor instead!"
-                            )
-                    elif pull == self.PULL_DOWN:
-                        if hasattr(gpiod, "line") and hasattr(
-                            gpiod.line, "BIAS_PULL_DOWN"
-                        ):
-                            config = gpiod.line_request()
-                            config.consumer = self._CONSUMER
-                            config.request_type = gpiod.line.BIAS_PULL_DOWN
-                            self._line.request(config)
-                        else:
-                            raise NotImplementedError(
-                                "Internal pulldowns not supported in this version of libgpiod, "
-                                "use physical resistor instead!"
-                            )
-                    elif pull == self.PULL_NONE:
-                        if hasattr(gpiod, "line") and hasattr(
-                            gpiod.line, "BIAS_DISABLE"
-                        ):
-                            config = gpiod.line_request()
-                            config.consumer = self._CONSUMER
-                            config.request_type = gpiod.line.BIAS_DISABLE
-                            self._line.request(config)
-                    else:
-                        raise RuntimeError(f"Invalid pull for pin: {self.id}")
-
-                self._mode = self.IN
-                self._line.release()
-                if hasattr(gpiod, "LINE_REQ_DIR_IN"):
-                    self._line.request(
-                        consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_IN, flags=flags
-                    )
-                else:
-                    config = gpiod.line_request()
-                    config.consumer = self._CONSUMER
-                    config.request_type = gpiod.line_request.DIRECTION_INPUT
-                    self._line.request(config)
-
-            elif mode == self.OUT:
-                if pull is not None:
-                    raise RuntimeError("Cannot set pull resistor on output")
-                self._mode = self.OUT
-                self._line.release()
-                if hasattr(gpiod, "LINE_REQ_DIR_OUT"):
-                    self._line.request(
-                        consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_OUT
-                    )
-                else:
-                    config = gpiod.line_request()
-                    config.consumer = self._CONSUMER
-                    config.request_type = gpiod.line_request.DIRECTION_OUTPUT
-                    self._line.request(config)
-            else:
-                raise RuntimeError("Invalid mode for pin: %s" % self.id)
-
-    def value(self, val=None):
-        """Set or return the Pin Value"""
-        if val is None:
-            return self._line.get_value()
-
-        if val in (self.LOW, self.HIGH):
-            self._value = val
-            self._line.set_value(val)
-            return None
-        raise RuntimeError("Invalid value for pin")
+if version.startswith("1."):
+    from .libgpiod.libgpiod_pin_1_x import Pin  # pylint: disable=unused-import
+else:
+    from .libgpiod.libgpiod_pin_2_x import Pin  # pylint: disable=unused-import