X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/a79e37b2729f77faf00545062fc4a8ded1a6eb97..db9616f6d0c1e0889f6e67c611c898ad43f9bc35:/src/adafruit_blinka/microcontroller/generic_linux/i2c.py

diff --git a/src/adafruit_blinka/microcontroller/generic_linux/i2c.py b/src/adafruit_blinka/microcontroller/generic_linux/i2c.py
index b151798..b6f2fa3 100644
--- a/src/adafruit_blinka/microcontroller/generic_linux/i2c.py
+++ b/src/adafruit_blinka/microcontroller/generic_linux/i2c.py
@@ -1,9 +1,18 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
 """Generic Linux I2C class using PureIO's smbus class"""
-import Adafruit_PureIO.smbus as smbus
+
+import warnings
+from Adafruit_PureIO import smbus
 
 
 class I2C:
-    """I2C class"""
+    """
+    I2C class
+
+    Baudrate has no effect on Linux systems. The argument is only there for compatibility.
+    """
 
     MASTER = 0
     SLAVE = 1
@@ -11,20 +20,25 @@ class I2C:
     _mode = None
     _i2c_bus = None
 
+    # pylint: disable=unused-argument
     def __init__(self, bus_num, mode=MASTER, baudrate=None):
         if mode != self.MASTER:
             raise NotImplementedError("Only I2C Master supported!")
         _mode = self.MASTER
 
-        # if baudrate != None:
-        #    print("I2C frequency is not settable in python, ignoring!")
+        if baudrate is not None:
+            warnings.warn(
+                "I2C frequency is not settable in python, ignoring!", RuntimeWarning
+            )
 
         try:
             self._i2c_bus = smbus.SMBus(bus_num)
         except FileNotFoundError:
             raise RuntimeError(
                 "I2C Bus #%d not found, check if enabled in config!" % bus_num
-            )
+            ) from RuntimeError
+
+    # pylint: enable=unused-argument
 
     def scan(self):
         """Try to read a byte from each address, if you get an OSError
@@ -66,7 +80,7 @@ class I2C:
         out_end=None,
         in_start=0,
         in_end=None,
-        stop=False
+        stop=False,
     ):
         """Write data from buffer_out to an address and then
         read data from an address and into buffer_in