X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/a19faf60e38b7cb27facaaaf5a8672860f9b5a9e..28f9b9ec689e55a09366cc6bf8d03f170bec6db8:/src/adafruit_blinka/microcontroller/generic_linux/spi.py

diff --git a/src/adafruit_blinka/microcontroller/generic_linux/spi.py b/src/adafruit_blinka/microcontroller/generic_linux/spi.py
index b905873..f2ffa82 100755
--- a/src/adafruit_blinka/microcontroller/generic_linux/spi.py
+++ b/src/adafruit_blinka/microcontroller/generic_linux/spi.py
@@ -1,5 +1,6 @@
 import spidev
 import time
+from adafruit_blinka.agnostic import detector
 
 class SPI:
     MSB = 0
@@ -29,6 +30,15 @@ class SPI:
         self.baudrate = baudrate
         self.mode = mode
         self.bits = bits
+        self.chip = detector.chip
+
+    def set_no_cs(self):
+        # No kernel seems to support this, so we're just going to pass
+        pass
+
+    @property
+    def frequency(self):
+        return self.baudrate
 
     def write(self, buf, start=0, end=None):
         if not buf:
@@ -37,34 +47,28 @@ class SPI:
             end = len(buf)
         try:
             self._spi.open(self._port, 0)
-            try:
-              self._spi.no_cs = True  # this doesn't work but try anyways
-            except AttributeError:
-              pass
+            self.set_no_cs()
             self._spi.max_speed_hz = self.baudrate
             self._spi.mode = self.mode
             self._spi.bits_per_word = self.bits
-            self._spi.writebytes([x for x in buf[start:end]])
+            self._spi.writebytes2(buf[start:end])
             self._spi.close()
         except FileNotFoundError as not_found:
             print("Could not open SPI device - check if SPI is enabled in kernel!")
             raise
 
-    def readinto(self, buf, start=0, end=None):
+    def readinto(self, buf, start=0, end=None, write_value=0):
         if not buf:
             return
         if end is None:
             end = len(buf)
         try:
             self._spi.open(self._port, 0)
-            try:
-              self._spi.no_cs = True  # this doesn't work but try anyways
-            except AttributeError:
-              pass
+            self.set_no_cs()
             self._spi.max_speed_hz = self.baudrate
             self._spi.mode = self.mode
             self._spi.bits_per_word = self.bits
-            data = self._spi.readbytes(end-start)
+            data = self._spi.xfer([write_value]*(end-start))
             for i in range(end-start):  # 'readinto' the given buffer
               buf[start+i] = data[i]
             self._spi.close()
@@ -77,17 +81,14 @@ class SPI:
         if not buffer_out or not buffer_in:
             return
         if out_end is None:
-            out_end = len(buffer_out)        
+            out_end = len(buffer_out)
         if in_end is None:
             in_end = len(buffer_in)
         if out_end - out_start != in_end - in_start:
             raise RuntimeError('Buffer slices must be of equal length.')
         try:
             self._spi.open(self._port, 0)
-            try:
-                self._spi.no_cs = True  # this doesn't work but try anyways
-            except AttributeError:
-                pass
+            self.set_no_cs()
             self._spi.max_speed_hz = self.baudrate
             self._spi.mode = self.mode
             self._spi.bits_per_word = self.bits