X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/976917690f9220b5e9e151f9c09594ac6e366563..8b6a8075b231d37eae4e3fd63281aa44458a4791:/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py

diff --git a/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py b/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py
index e412926..b7953e1 100644
--- a/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py
+++ b/src/adafruit_blinka/microcontroller/generic_linux/libgpiod_pin.py
@@ -11,6 +11,7 @@ except ImportError:
     ) from ImportError
 
 
+# pylint: disable=too-many-branches,too-many-statements
 class Pin:
     """Pins dont exist in CPython so...lets make our own!"""
 
@@ -31,10 +32,16 @@ class Pin:
         self.id = pin_id
         if isinstance(pin_id, tuple):
             self._num = int(pin_id[1])
-            self._chip = gpiod.chip(str(pin_id[0]), gpiod.chip.OPEN_BY_NUMBER)
+            if hasattr(gpiod, "Chip"):
+                self._chip = gpiod.Chip(str(pin_id[0]), gpiod.Chip.OPEN_BY_NUMBER)
+            else:
+                self._chip = gpiod.chip(str(pin_id[0]), gpiod.chip.OPEN_BY_NUMBER)
         else:
             self._num = int(pin_id)
-            self._chip = gpiod.chip("gpiochip0", gpiod.chip.OPEN_BY_NAME)
+            if hasattr(gpiod, "Chip"):
+                self._chip = gpiod.Chip("gpiochip0", gpiod.Chip.OPEN_BY_NAME)
+            else:
+                self._chip = gpiod.chip("gpiochip0", gpiod.chip.OPEN_BY_NAME)
         self._line = None
 
     def __repr__(self):
@@ -52,32 +59,65 @@ class Pin:
         if mode is not None:
             if mode == self.IN:
                 flags = 0
+                self._line.release()
                 if pull is not None:
                     if pull == self.PULL_UP:
-                        raise NotImplementedError(
-                            "Internal pullups not supported in libgpiod, "
-                            "use physical resistor instead!"
-                        )
-                    if pull == self.PULL_DOWN:
-                        raise NotImplementedError(
-                            "Internal pulldowns not supported in libgpiod, "
-                            "use physical resistor instead!"
-                        )
-                    raise RuntimeError("Invalid pull for pin: %s" % self.id)
+                        if hasattr(gpiod, "LINE_REQ_FLAG_BIAS_PULL_UP"):
+                            flags |= gpiod.LINE_REQ_FLAG_BIAS_PULL_UP
+                        else:
+                            raise NotImplementedError(
+                                "Internal pullups not supported in this version of libgpiod, "
+                                "use physical resistor instead!"
+                            )
+                    elif pull == self.PULL_DOWN:
+                        if hasattr(gpiod, "line") and hasattr(
+                            gpiod, "LINE_REQ_FLAG_BIAS_PULL_DOWN"
+                        ):
+                            flags |= gpiod.LINE_REQ_FLAG_BIAS_PULL_DOWN
+                        else:
+                            raise NotImplementedError(
+                                "Internal pulldowns not supported in this version of libgpiod, "
+                                "use physical resistor instead!"
+                            )
+                    elif pull == self.PULL_NONE:
+                        if hasattr(gpiod, "line") and hasattr(
+                            gpiod, "LINE_REQ_FLAG_BIAS_DISABLE"
+                        ):
+                            flags |= gpiod.LINE_REQ_FLAG_BIAS_DISABLE
+                        else:
+                            raise NotImplementedError(
+                                "Internal pulldowns not supported in this version of libgpiod, "
+                                "use physical resistor instead!"
+                            )
+                    else:
+                        raise RuntimeError(f"Invalid pull for pin: {self.id}")
 
                 self._mode = self.IN
                 self._line.release()
-                self._line.request(
-                    consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_IN, flags=flags
-                )
+                if hasattr(gpiod, "LINE_REQ_DIR_IN"):
+                    self._line.request(
+                        consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_IN, flags=flags
+                    )
+                else:
+                    config = gpiod.line_request()
+                    config.consumer = self._CONSUMER
+                    config.request_type = gpiod.line_request.DIRECTION_INPUT
+                    self._line.request(config)
 
             elif mode == self.OUT:
                 if pull is not None:
                     raise RuntimeError("Cannot set pull resistor on output")
                 self._mode = self.OUT
                 self._line.release()
-                self._line.request(consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_OUT)
-
+                if hasattr(gpiod, "LINE_REQ_DIR_OUT"):
+                    self._line.request(
+                        consumer=self._CONSUMER, type=gpiod.LINE_REQ_DIR_OUT
+                    )
+                else:
+                    config = gpiod.line_request()
+                    config.consumer = self._CONSUMER
+                    config.request_type = gpiod.line_request.DIRECTION_OUTPUT
+                    self._line.request(config)
             else:
                 raise RuntimeError("Invalid mode for pin: %s" % self.id)