X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/6586729b6b4c230875ff9ed18f4dd01aa6caff87..a8b87ecacf1ddb77239f707c33ea26bedecf13ed:/src/adafruit_blinka/microcontroller/am335x/pin.py

diff --git a/src/adafruit_blinka/microcontroller/am335x/pin.py b/src/adafruit_blinka/microcontroller/am335x/pin.py
index 24ae0c1..71715e6 100644
--- a/src/adafruit_blinka/microcontroller/am335x/pin.py
+++ b/src/adafruit_blinka/microcontroller/am335x/pin.py
@@ -9,11 +9,11 @@ class Pin:
     PULL_NONE = 0
     PULL_UP = 1
     PULL_DOWN = 2
-    
+
     id = None
     _value = LOW
     _mode = IN
-    
+
     def __init__(self, pin_name):
         self.id = pin_name
 
@@ -41,7 +41,7 @@ class Pin:
             elif pull == self.PULL_DOWN:
                 GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
             else:
-                raise RuntimeError("Invalid pull for pin: %s" % self.id)       
+                raise RuntimeError("Invalid pull for pin: %s" % self.id)
 
     def value(self, val=None):
         if val != None:
@@ -56,6 +56,75 @@ class Pin:
         else:
             return GPIO.input(self.id)
 
+
+# PocketBeagle
+P1_2 = Pin('P1_2')
+P1_3 = Pin('P1_3')
+P1_4 = Pin('P1_4')
+
+P1_6 = Pin('P1_6')
+
+P1_8 = Pin('P1_8')
+
+P1_10 = Pin('P1_10')
+
+P1_12 = Pin('P1_12')
+
+P1_19 = Pin('P1_19')
+P1_20 = Pin('P1_20')
+P1_21 = Pin('P1_21')
+
+P1_23 = Pin('P1_23')
+
+P1_25 = Pin('P1_25')
+P1_26 = Pin('P1_26')
+P1_27 = Pin('P1_27')
+P1_28 = Pin('P1_28')
+P1_29 = Pin('P1_29')
+P1_30 = Pin('P1_30')
+P1_31 = Pin('P1_31')
+P1_32 = Pin('P1_32')
+P1_33 = Pin('P1_33')
+P1_34 = Pin('P1_34')
+P1_35 = Pin('P1_35')
+P1_36 = Pin('P1_36')
+
+
+P2_1 = Pin('P2_1')
+P2_2 = Pin('P2_2')
+P2_3 = Pin('P2_3')
+P2_4 = Pin('P2_4')
+P2_5 = Pin('P2_5')
+P2_6 = Pin('P2_6')
+P2_7 = Pin('P2_7')
+P2_8 = Pin('P2_8')
+P2_9 = Pin('P2_9')
+P2_10 = Pin('P2_10')
+P2_11 = Pin('P2_11')
+
+P2_17 = Pin('P2_17')
+P2_18 = Pin('P2_18')
+P2_19 = Pin('P2_19')
+P2_20 = Pin('P2_20')
+
+P2_22 = Pin('P2_22')
+
+P2_24 = Pin('P2_24')
+P2_25 = Pin('P2_25')
+P2_26 = Pin('P2_26')
+P2_27 = Pin('P2_27')
+P2_28 = Pin('P2_28')
+P2_29 = Pin('P2_29')
+P2_30 = Pin('P2_30')
+P2_31 = Pin('P2_31')
+P2_32 = Pin('P2_32')
+P2_33 = Pin('P2_33')
+P2_34 = Pin('P2_34')
+P2_35 = Pin('P2_35')
+P2_36 = Pin('P2_36')
+
+
+# BeagleBone Black
 P8_3 = Pin('P8_3')
 P8_4 = Pin('P8_4')
 P8_5 = Pin('P8_5')
@@ -124,75 +193,26 @@ P9_31 = Pin('P9_31')
 P9_41 = Pin('P9_41')
 P9_42 = Pin('P9_42')
 
+# common to all beagles
 USR0 = Pin('USR0')
 USR1 = Pin('USR1')
 USR2 = Pin('USR2')
 USR3 = Pin('USR3')
 
-SCL = Pin('P9_19')
-SDA = Pin('P9_20')
+# all special functions (SPI / I2C) are moved to
+# src/adafruit_blinka/board/beaglebone_black.py
 
-# Refer to header default pin modes
-# http://beagleboard.org/static/images/cape-headers.png
-#
-# P9_17 (SPI0_CSO => CE0) enables peripheral device
-# P9_18 (SPI0_D1 => MOSI) outputs data to peripheral device
-# P9_21 (SPIO_DO => MISO) receives data from peripheral device
-# P9_22 (SPI0_SCLK => SCLK) outputs clock signal
-# 
-# Use config-pin to set pin mode for SPI pins
-# https://github.com/beagleboard/bb.org-overlays/tree/master/tools/beaglebone-universal-io
-# config-pin p9.17 spi_cs
-# config-pin p9.18 spi
-# config-pin p9.21 spi
-# config-pin p9.22 spi_sclk
+# # ordered as spiId, sckId, mosiId, misoId
+# spiPorts = (
+#     (0, SCLK, MOSI, MISO),
+#     (1, SCLK_1, MOSI_1, MISO_1)
+# )
 #
-CE0 = Pin('P9_17')
-MOSI = Pin('P9_18')
-MISO = Pin('P9_21')
-SCLK = Pin('P9_22')
-#CircuitPython naming convention for SPI Clock
-SCK = Pin('P9_22')
-
-# Pins for SPI1
-# refer to:
-# http://beagleboard.org/static/images/cape-headers-spi.png
+# # ordered as uartId, txId, rxId
+# uartPorts = (
+#     (),
+# )
 #
-# CE1 P9.28 SPI1_CS0
-# MISO_1 P9.29 SPI1_D0
-# MOSI_1 P9.30 SPI1_D1
-# SCLK_1 P9.31 SPI_SCLK
-#
-# SPI1 conflicts with HDMI Audio (McASP)
-#
-# Refer to:
-# https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
-#
-# To Disable HDMI AUDIO, uncomment this line in /boot/uEnv.txt:
-# disable_uboot_overlay_audio=1
-#
-# Set pin modes for SPI1 with:
-#
-# config-pin p9.28 spi1_cs
-# config-pin p9.29 spi1
-# config-pin p9.30 spi1
-# config-pin p9.31 spi_sclk
-CE1 = Pin('P9_28')
-MOSI_1 = Pin('P9_29')
-MISO_1 = Pin('P9_30')
-SCLK_1 = Pin('P9_31')
-#CircuitPython naming convention for SPI Clock
-SCK_1 = Pin('P9_31')
-
-# ordered as spiId, sckId, mosiId, misoId
-spiPorts = ((0, SCLK, MOSI, MISO), (1, SCLK_1, MOSI_1, MISO_1))
-
-# ordered as uartId, txId, rxId
-uartPorts = (
-    (),
-)
-
-i2cPorts = (
-    (2, SCL, SDA),
-)
-
+# i2cPorts = (
+#     (2, SCL, SDA),
+# )