X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/614431493bf0e95615b08576ee74ffd0cdeabbbb..9b912a38f45f69764a4db26309e16fdac6fe5678:/src/usb_hid.py

diff --git a/src/usb_hid.py b/src/usb_hid.py
index c55a28d..f7ecf97 100644
--- a/src/usb_hid.py
+++ b/src/usb_hid.py
@@ -51,6 +51,10 @@ class Device:
         self._last_received_report = None
 
     def send_report(self, report: bytearray, report_id: int = None):
+        """Send an HID report. If the device descriptor specifies zero or one report id's,
+        you can supply `None` (the default) as the value of ``report_id``.
+        Otherwise you must specify which report id to use when sending the report.
+        """
         report_id = report_id or self.report_ids[0]
         device_path = self.get_device_path(report_id)
         with open(device_path, "rb+") as fd:
@@ -254,7 +258,7 @@ Device.MOUSE = Device(
     ),
     usage_page=0x1,
     usage=0x02,
-    report_ids=[2],
+    report_ids=[0x02],
     in_report_lengths=[4],
     out_report_lengths=[0],
 )
@@ -443,20 +447,20 @@ Device.BOOT_MOUSE = Device(
     ),
     usage_page=0x1,
     usage=0x02,
-    report_ids=[1],
+    report_ids=[0],
     in_report_lengths=[4],
     out_report_lengths=[0],
 )
 
 
 def disable() -> None:
-    # """Do not present any USB HID devices to the host computer.
-    # Can be called in ``boot.py``, before USB is connected.
-    # The HID composite device is normally enabled by default,
-    # but on some boards with limited endpoints, including STM32F4,
-    # it is disabled by default. You must turn off another USB device such
-    # as `usb_cdc` or `storage` to free up endpoints for use by `usb_hid`.
-    # """
+    """Do not present any USB HID devices to the host computer.
+    Can be called in ``boot.py``, before USB is connected.
+    The HID composite device is normally enabled by default,
+    but on some boards with limited endpoints, including STM32F4,
+    it is disabled by default. You must turn off another USB device such
+    as `usb_cdc` or `storage` to free up endpoints for use by `usb_hid`.
+    """
     try:
         Path("%s/UDC" % this.gadget_root).write_text("")
     except FileNotFoundError:
@@ -483,51 +487,53 @@ def disable() -> None:
         pass
     this.devices = []
 
+
 atexit.register(disable)
 
 
 def enable(requested_devices: Sequence[Device], boot_device: int = 0) -> None:
-# """Specify which USB HID devices that will be available.
-# Can be called in ``boot.py``, before USB is connected.
-#
-# :param Sequence devices: `Device` objects.
-#   If `devices` is empty, HID is disabled. The order of the ``Devices``
-#   may matter to the host. For instance, for MacOS, put the mouse device
-#   before any Gamepad or Digitizer HID device or else it will not work.
-# :param int boot_device: If non-zero, inform the host that support for a
-#   a boot HID device is available.
-#   If ``boot_device=1``, a boot keyboard is available.
-#   If ``boot_device=2``, a boot mouse is available. No other values are allowed.
-#   See below.
-#
-# If you enable too many devices at once, you will run out of USB endpoints.
-# The number of available endpoints varies by microcontroller.
-# CircuitPython will go into safe mode after running ``boot.py`` to inform you if
-# not enough endpoints are available.
-#
-# **Boot Devices**
-#
-# Boot devices implement a fixed, predefined report descriptor, defined in
-# https://www.usb.org/sites/default/files/hid1_12.pdf, Appendix B. A USB host
-# can request to use the boot device if the USB device says it is available.
-# Usually only a BIOS or other kind of limited-functionality
-# host needs boot keyboard support.
-#
-# For example, to make a boot keyboard available, you can use this code::
-#
-#   usb_hid.enable((Device.KEYBOARD), boot_device=1)  # 1 for a keyboard
-#
-# If the host requests the boot keyboard, the report descriptor provided by `Device.KEYBOARD`
-# will be ignored, and the predefined report descriptor will be used.
-# But if the host does not request the boot keyboard,
-# the descriptor provided by `Device.KEYBOARD` will be used.
-#
-# The HID boot device must usually be the first or only device presented by CircuitPython.
-# The HID device will be USB interface number 0.
-# To make sure it is the first device, disable other USB devices, including CDC and MSC (CIRCUITPY).
-# If you specify a non-zero ``boot_device``, and it is not the first device, CircuitPython
-# will enter safe mode to report this error.
-# """
+    """Specify which USB HID devices that will be available.
+    Can be called in ``boot.py``, before USB is connected.
+
+    :param Sequence devices: `Device` objects.
+      If `devices` is empty, HID is disabled. The order of the ``Devices``
+      may matter to the host. For instance, for MacOS, put the mouse device
+      before any Gamepad or Digitizer HID device or else it will not work.
+    :param int boot_device: If non-zero, inform the host that support for a
+      a boot HID device is available.
+      If ``boot_device=1``, a boot keyboard is available.
+      If ``boot_device=2``, a boot mouse is available. No other values are allowed.
+      See below.
+
+    If you enable too many devices at once, you will run out of USB endpoints.
+    The number of available endpoints varies by microcontroller.
+    CircuitPython will go into safe mode after running ``boot.py`` to inform you if
+    not enough endpoints are available.
+
+    **Boot Devices**
+
+    Boot devices implement a fixed, predefined report descriptor, defined in
+    https://www.usb.org/sites/default/files/hid1_12.pdf, Appendix B. A USB host
+    can request to use the boot device if the USB device says it is available.
+    Usually only a BIOS or other kind of limited-functionality
+    host needs boot keyboard support.
+
+    For example, to make a boot keyboard available, you can use this code::
+
+      usb_hid.enable((Device.KEYBOARD), boot_device=1)  # 1 for a keyboard
+
+    If the host requests the boot keyboard, the report descriptor provided by `Device.KEYBOARD`
+    will be ignored, and the predefined report descriptor will be used.
+    But if the host does not request the boot keyboard,
+    the descriptor provided by `Device.KEYBOARD` will be used.
+
+    The HID boot device must usually be the first or only device presented by CircuitPython.
+    The HID device will be USB interface number 0.
+    To make sure it is the first device, disable other USB devices, including CDC and MSC
+    (CIRCUITPY).
+    If you specify a non-zero ``boot_device``, and it is not the first device, CircuitPython
+    will enter safe mode to report this error.
+    """
     this.boot_device = boot_device
 
     if len(requested_devices) == 0:
@@ -620,8 +626,8 @@ def enable(requested_devices: Sequence[Device], boot_device: int = 0) -> None:
     #     $ echo 120 > configs/c.1/MaxPower
     #     """
 
-    for i, device in enumerate(requested_devices):
-        config_root = "%s/configs/device.%s" % (this.gadget_root, i + 1)
+    for device in requested_devices:
+        config_root = "%s/configs/device.1" % this.gadget_root
         Path("%s/" % config_root).mkdir(parents=True, exist_ok=True)
         Path("%s/strings/0x409" % config_root).mkdir(parents=True, exist_ok=True)
         Path("%s/strings/0x409/configuration" % config_root).write_text(
@@ -679,7 +685,12 @@ def enable(requested_devices: Sequence[Device], boot_device: int = 0) -> None:
             # e.g.::
             #
             #     $ ln -s functions/ncm.usb0 configs/c.1  """
-            Path("%s/hid.usb%s" % (config_root, report_id)).symlink_to(function_root)
+            try:
+                Path("%s/hid.usb%s" % (config_root, report_id)).symlink_to(
+                    function_root
+                )
+            except:
+                pass
     # """ 5. Enabling the gadget
     # ----------------------
     # Such a gadget must be finally enabled so that the USB host can enumerate it.