X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/56feca73d6ec6b79c9b030d8ab06cc00574d6013..64755adc8a8c0dbfd792d3eb60d02fd033be530e:/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py

diff --git a/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py b/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py
index fb8193c..8e76cc7 100644
--- a/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py
+++ b/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py
@@ -1,8 +1,12 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
 """Chip Definition for MCP2221"""
 
 import os
 import time
 import atexit
+
 import hid
 
 # Here if you need it
@@ -55,21 +59,14 @@ class MCP2221:
         # make sure the device gets closed before exit
         atexit.register(self.close)
         if MCP2221_RESET_DELAY >= 0:
-            try:
-                self._reset()
-            except OSError:
-                # this might fail on Linux with the hid_mcp2221 native
-                # driver and a short reset delay -- if it fails,
-                # close the device before reraising
-                self.close()
-                raise
+            self._reset()
         self._gp_config = [0x07] * 4  # "don't care" initial value
         for pin in range(4):
             self.gp_set_mode(pin, self.GP_GPIO)  # set to GPIO mode
             self.gpio_set_direction(pin, 1)  # set to INPUT
 
     def close(self):
-        """Close the device. Does nothing if the device is not open."""
+        """Close the hid device. Does nothing if the device is not open."""
         self._hid.close()
 
     def __del__(self):
@@ -136,6 +133,7 @@ class MCP2221:
 
     def _reset(self):
         self._hid_xfer(b"\x70\xAB\xCD\xEF", response=False)
+        self._hid.close()
         time.sleep(MCP2221_RESET_DELAY)
         start = time.monotonic()
         while time.monotonic() - start < 5:
@@ -250,7 +248,7 @@ class MCP2221:
         for _ in range(MCP2221_RETRY_MAX):
             status = self._i2c_status()
             if status[20] & MASK_ADDR_NACK:
-                raise RuntimeError("I2C slave address was NACK'd")
+                raise OSError("I2C slave address was NACK'd")
             usb_cmd_status = status[8]
             if usb_cmd_status == 0:
                 break