X-Git-Url: https://git.ayoreis.com/Adafruit_Blinka-hackapet.git/blobdiff_plain/0ab99d44db2e62b79e57ebb751459ac4b371daab..30d6cd0ac14df67350f14f67a5fa52eb43e59838:/src/adafruit_blinka/microcontroller/ft232h/spi.py?ds=inline

diff --git a/src/adafruit_blinka/microcontroller/ft232h/spi.py b/src/adafruit_blinka/microcontroller/ft232h/spi.py
deleted file mode 100644
index afdf314..0000000
--- a/src/adafruit_blinka/microcontroller/ft232h/spi.py
+++ /dev/null
@@ -1,90 +0,0 @@
-"""SPI Class for FT232H"""
-from adafruit_blinka.microcontroller.ft232h.pin import Pin
-
-# pylint: disable=protected-access
-class SPI:
-    """Custom SPI Class for FT232H"""
-
-    MSB = 0
-
-    def __init__(self):
-        # pylint: disable=import-outside-toplevel
-        from pyftdi.spi import SpiController
-
-        # pylint: enable=import-outside-toplevel
-
-        self._spi = SpiController(cs_count=1)
-        self._spi.configure("ftdi://ftdi:ft232h/1")
-        self._port = self._spi.get_port(0)
-        self._port.set_frequency(100000)
-        self._port._cpol = 0
-        self._port._cpha = 0
-        # Change GPIO controller to SPI
-        Pin.ft232h_gpio = self._spi.get_gpio()
-
-    # pylint: disable=too-many-arguments,unused-argument
-    def init(
-        self,
-        baudrate=100000,
-        polarity=0,
-        phase=0,
-        bits=8,
-        firstbit=MSB,
-        sck=None,
-        mosi=None,
-        miso=None,
-    ):
-        """Initialize the Port"""
-        self._port.set_frequency(baudrate)
-        # FTDI device can only support mode 0 and mode 2
-        # due to the limitation of MPSSE engine.
-        # This means CPHA must = 0
-        self._port._cpol = polarity
-        if phase != 0:
-            raise ValueError("Only SPI phase 0 is supported by FT232H.")
-        self._port._cpha = phase
-
-    # pylint: enable=too-many-arguments
-
-    @property
-    def frequency(self):
-        """Return the current frequency"""
-        return self._port.frequency
-
-    def write(self, buf, start=0, end=None):
-        """Write data from the buffer to SPI"""
-        end = end if end else len(buf)
-        chunks, rest = divmod(end - start, self._spi.PAYLOAD_MAX_LENGTH)
-        for i in range(chunks):
-            chunk_start = start + i * self._spi.PAYLOAD_MAX_LENGTH
-            chunk_end = chunk_start + self._spi.PAYLOAD_MAX_LENGTH
-            self._port.write(buf[chunk_start:chunk_end])
-        if rest:
-            self._port.write(buf[-1 * rest :])
-
-    # pylint: disable=unused-argument
-    def readinto(self, buf, start=0, end=None, write_value=0):
-        """Read data from SPI and into the buffer"""
-        end = end if end else len(buf)
-        result = self._port.read(end - start)
-        for i, b in enumerate(result):
-            buf[start + i] = b
-
-    # pylint: enable=unused-argument
-
-    # pylint: disable=too-many-arguments
-    def write_readinto(
-        self, buffer_out, buffer_in, out_start=0, out_end=None, in_start=0, in_end=None
-    ):
-        """Perform a half-duplex write from buffer_out and then
-        read data into buffer_in
-        """
-        out_end = out_end if out_end else len(buffer_out)
-        in_end = in_end if in_end else len(buffer_in)
-        result = self._port.exchange(
-            buffer_out[out_start:out_end], in_end - in_start, duplex=True
-        )
-        for i, b in enumerate(result):
-            buffer_in[in_start + i] = b
-
-    # pylint: enable=too-many-arguments