Simple refactor to place all AllWinner boards within the same module

[Adafruit_Blinka-hackapet.git] / src / adafruit_blinka / microcontroller / allwinner_h3 / pin.py

diff --git a/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py b/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
deleted file mode 100644 (file)
index f2ed8c0..0000000
--- a/src/adafruit_blinka/microcontroller/allwinner_h3/pin.py
+++ /dev/null
@@ -1,62 +0,0 @@
-from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
-
-PA0 = Pin(0)
-UART2_TX = PA0
-PA1 = Pin(1)
-UART2_RX = PA1
-PA2 = Pin(2)
-PA3 = Pin(3)
-PA6 = Pin(6)
-PA7 = Pin(7)
-PA8 = Pin(8)
-PA9 = Pin(9)
-PA10 = Pin(10)
-PA11 = Pin(11)
-TWI0_SCL = PA11
-PA12 = Pin(12)
-TWI0_SDA = PA12
-PA13 = Pin(13)
-UART3_TX = PA13
-PA14 = Pin(14)
-UART3_RX = PA14
-SPI1_SCLK = PA14
-PA15 = Pin(15)
-SPI1_MOSI = PA15
-PA16 = Pin(16)
-SPI1_MISO = PA16
-PA17 = Pin(17)
-PA18 = Pin(18)
-PA19 = Pin(19)
-PA20 = Pin(20)
-PA21 = Pin(21)
-
-PC0 = Pin(64)
-SPI0_MOSI = PC0
-PC1 = Pin(65)
-SPI0_MISO = PC1
-PC2 = Pin(66)
-SPI0_SCLK = PC2
-PC3 = Pin(67)
-SPI0_CS = PC3
-PC4 = Pin(68)
-PC7 = Pin(71)
-
-PD14 = Pin(110)
-
-PG6 = Pin(198)
-UART1_TX = PG6
-PG7 = Pin(199)
-UART1_RX = PG7
-PG8 = Pin(200)
-PG9 = Pin(201)
-PG10 = Pin(202)
-PG11 = Pin(203)
-PG12 = Pin(204)
-PG13 = Pin(205)
-
-
-i2cPorts = ( (0, TWI0_SCL, TWI0_SDA), )
-# ordered as spiId, sckId, mosiId, misoId
-spiPorts = ( (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO), )
-# ordered as uartId, txId, rxId
-uartPorts = ( (3, UART3_TX, UART3_RX), )