add KB2040

[Adafruit_Blinka-hackapet.git] / src / adafruit_blinka / board / kb2040_u2if.py

diff --git a/src/adafruit_blinka/board/kb2040_u2if.py b/src/adafruit_blinka/board/kb2040_u2if.py
new file mode 100644 (file)
index 0000000..df8c732
--- /dev/null
+++ b/src/adafruit_blinka/board/kb2040_u2if.py
@@ -0,0 +1,57 @@
+# SPDX-FileCopyrightText: 2023 Carter Nelson for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""
+Pin definitions for the KB2040 with u2if firmware.
+
+Adafruit CircuitPython 8.2.0 on 2023-07-05; Adafruit KB2040 with rp2040
+>>> import board
+>>> board.
+A0              A1              A2              A3
+BUTTON          CLK             D0              D1
+D10             D11             D12             D13
+D2              D3              D4              D5
+D6              D7              D8              D9
+I2C             MISO            MOSI            NEOPIXEL
+RX              SCK             SCL             SDA
+SPI             STEMMA_I2C      TX              UART
+board_id
+"""
+
+from adafruit_blinka.microcontroller.rp2040_u2if import pin
+
+D0 = TX = pin.GP0
+D1 = RX = pin.GP1
+D2 = pin.GP2
+D3 = pin.GP3
+D4 = pin.GP4
+D5 = pin.GP5
+D6 = pin.GP6
+D7 = pin.GP7
+D8 = pin.GP8
+D9 = pin.GP9
+D10 = pin.GP10
+D11 = pin.GP11
+D12 = pin.GP12
+D13 = pin.GP13
+
+A0 = pin.GP26
+A1 = pin.GP27
+A2 = pin.GP28
+A3 = pin.GP29
+
+BUTTON = pin.GP11
+
+NEOPIXEL = pin.GP17
+
+SDA = pin.GP12
+SCL = pin.GP13
+
+SCLK = pin.GP18
+MOSI = pin.GP19
+MISO = pin.GP20
+
+
+# access u2if via pin instance to open for specifc VID/PID
+# pylint:disable = protected-access
+pin.GP0._u2if_open_hid(0x239A, 0x0105)
\ No newline at end of file