Added pre-commit support

[Adafruit_Blinka-hackapet.git] / src / adafruit_blinka / microcontroller / mcp2221 / mcp2221.py

diff --git a/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py b/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py
index 4d1fee8278d0eefd834e62af169de32d7ee78c64..7b62c3f5c4931a4c9e0eb47bd0714fa966f0f16f 100644 (file)
--- a/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py
+++ b/src/adafruit_blinka/microcontroller/mcp2221/mcp2221.py
@@ -1,3 +1,6 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT

 """Chip Definition for MCP2221"""
 
 import os
 """Chip Definition for MCP2221"""
 
 import os


@@ -6,13 +9,12 @@ import hid
 
 # Here if you need it
 MCP2221_HID_DELAY = float(os.environ.get("BLINKA_MCP2221_HID_DELAY", 0))
 
 # Here if you need it
 MCP2221_HID_DELAY = float(os.environ.get("BLINKA_MCP2221_HID_DELAY", 0))

-# Use to set delay between reset and device reopen
+# Use to set delay between reset and device reopen. if negative, don't reset at all

 MCP2221_RESET_DELAY = float(os.environ.get("BLINKA_MCP2221_RESET_DELAY", 0.5))
 
 # from the C driver
 # http://ww1.microchip.com/downloads/en/DeviceDoc/mcp2221_0_1.tar.gz
 # others (???) determined during driver developement
 MCP2221_RESET_DELAY = float(os.environ.get("BLINKA_MCP2221_RESET_DELAY", 0.5))
 
 # from the C driver
 # http://ww1.microchip.com/downloads/en/DeviceDoc/mcp2221_0_1.tar.gz
 # others (???) determined during driver developement

-# pylint: disable=bad-whitespace

 RESP_ERR_NOERR = 0x00
 RESP_ADDR_NACK = 0x25
 RESP_READ_ERR = 0x7F
 RESP_ERR_NOERR = 0x00
 RESP_ADDR_NACK = 0x25
 RESP_READ_ERR = 0x7F


@@ -35,7 +37,6 @@ RESP_I2C_WRITINGNOSTOP = 0x45  # ???
 MCP2221_RETRY_MAX = 50
 MCP2221_MAX_I2C_DATA_LEN = 60
 MASK_ADDR_NACK = 0x40
 MCP2221_RETRY_MAX = 50
 MCP2221_MAX_I2C_DATA_LEN = 60
 MASK_ADDR_NACK = 0x40

-# pylint: enable=bad-whitespace

 
 
 class MCP2221:
 
 
 class MCP2221:


@@ -53,7 +54,12 @@ class MCP2221:
     def __init__(self):
         self._hid = hid.device()
         self._hid.open(MCP2221.VID, MCP2221.PID)
     def __init__(self):
         self._hid = hid.device()
         self._hid.open(MCP2221.VID, MCP2221.PID)

-        self._reset()
+        if MCP2221_RESET_DELAY >= 0:
+            self._reset()
+        self._gp_config = [0x07] * 4  # "don't care" initial value
+        for pin in range(4):
+            self.gp_set_mode(pin, self.GP_GPIO)  # set to GPIO mode
+            self.gpio_set_direction(pin, 1)  # set to INPUT

 
     def _hid_xfer(self, report, response=True):
         """Perform HID Transfer"""
 
     def _hid_xfer(self, report, response=True):
         """Perform HID Transfer"""


@@ -76,21 +82,21 @@ class MCP2221:
 
     def gp_set_mode(self, pin, mode):
         """Set Current Pin Mode"""
 
     def gp_set_mode(self, pin, mode):
         """Set Current Pin Mode"""

-        # get current settings
-        current = self._hid_xfer(b"\x61")
+        # already set to that mode?
+        mode &= 0x07
+        if mode == (self._gp_config[pin] & 0x07):
+            return
+        # update GP mode for pin
+        self._gp_config[pin] = mode

         # empty report, this is safe since 0's = no change
         report = bytearray(b"\x60" + b"\x00" * 63)
         # set the alter GP flag byte
         report[7] = 0xFF
         # empty report, this is safe since 0's = no change
         report = bytearray(b"\x60" + b"\x00" * 63)
         # set the alter GP flag byte
         report[7] = 0xFF

-        # each pin can be set individually
-        # but all 4 get set at once, so we need to
-        # transpose current settings
-        report[8] = current[22]  # GP0
-        report[9] = current[23]  # GP1
-        report[10] = current[24]  # GP2
-        report[11] = current[25]  # GP3
-        # then change only the one
-        report[8 + pin] = mode & 0x07
+        # add GP setttings
+        report[8] = self._gp_config[0]
+        report[9] = self._gp_config[1]
+        report[10] = self._gp_config[2]
+        report[11] = self._gp_config[3]

         # and make it so
         self._hid_xfer(report)
 
         # and make it so
         self._hid_xfer(report)
 


@@ -132,6 +138,12 @@ class MCP2221:
     # ----------------------------------------------------------------
     def gpio_set_direction(self, pin, mode):
         """Set Current GPIO Pin Direction"""
     # ----------------------------------------------------------------
     def gpio_set_direction(self, pin, mode):
         """Set Current GPIO Pin Direction"""

+        if mode:
+            # set bit 3 for INPUT
+            self._gp_config[pin] |= 1 << 3
+        else:
+            # clear bit 3 for OUTPUT
+            self._gp_config[pin] &= ~(1 << 3)

         report = bytearray(b"\x50" + b"\x00" * 63)  # empty set GPIO report
         offset = 4 * (pin + 1)
         report[offset] = 0x01  # set pin direction
         report = bytearray(b"\x50" + b"\x00" * 63)  # empty set GPIO report
         offset = 4 * (pin + 1)
         report[offset] = 0x01  # set pin direction


@@ -140,6 +152,12 @@ class MCP2221:
 
     def gpio_set_pin(self, pin, value):
         """Set Current GPIO Pin Value"""
 
     def gpio_set_pin(self, pin, value):
         """Set Current GPIO Pin Value"""

+        if value:
+            # set bit 4
+            self._gp_config[pin] |= 1 << 4
+        else:
+            # clear bit 4
+            self._gp_config[pin] &= ~(1 << 4)

         report = bytearray(b"\x50" + b"\x00" * 63)  # empty set GPIO report
         offset = 2 + 4 * pin
         report[offset] = 0x01  # set pin value
         report = bytearray(b"\x50" + b"\x00" * 63)  # empty set GPIO report
         offset = 2 + 4 * pin
         report[offset] = 0x01  # set pin value


@@ -174,7 +192,7 @@ class MCP2221:
             # bus release will need "a few hundred microseconds"
             time.sleep(0.001)
 
             # bus release will need "a few hundred microseconds"
             time.sleep(0.001)
 

-    # pylint: disable=too-many-arguments
+    # pylint: disable=too-many-arguments,too-many-branches

     def _i2c_write(self, cmd, address, buffer, start=0, end=None):
         if self._i2c_state() != 0x00:
             self._i2c_cancel()
     def _i2c_write(self, cmd, address, buffer, start=0, end=None):
         if self._i2c_state() != 0x00:
             self._i2c_cancel()


@@ -183,7 +201,7 @@ class MCP2221:
         length = end - start
         retries = 0
 
         length = end - start
         retries = 0
 

-        while (end - start) > 0:
+        while (end - start) > 0 or not buffer:

             chunk = min(end - start, MCP2221_MAX_I2C_DATA_LEN)
             # write out current chunk
             resp = self._hid_xfer(
             chunk = min(end - start, MCP2221_MAX_I2C_DATA_LEN)
             # write out current chunk
             resp = self._hid_xfer(


@@ -208,6 +226,8 @@ class MCP2221:
             # yay chunk sent!
             while self._i2c_state() == RESP_I2C_PARTIALDATA:
                 time.sleep(0.001)
             # yay chunk sent!
             while self._i2c_state() == RESP_I2C_PARTIALDATA:
                 time.sleep(0.001)

+            if not buffer:
+                break

             start += chunk
             retries = 0
 
             start += chunk
             retries = 0
 


@@ -252,7 +272,7 @@ class MCP2221:
 
         # and now the read part
         while (end - start) > 0:
 
         # and now the read part
         while (end - start) > 0:

-            for retry in range(MCP2221_RETRY_MAX):
+            for _ in range(MCP2221_RETRY_MAX):

                 # the actual read
                 resp = self._hid_xfer(b"\x40")
                 # check for success
                 # the actual read
                 resp = self._hid_xfer(b"\x40")
                 # check for success


@@ -270,6 +290,8 @@ class MCP2221:
                     continue
                 if resp[2] in (RESP_READ_COMPL, RESP_READ_PARTIAL):
                     break
                     continue
                 if resp[2] in (RESP_READ_COMPL, RESP_READ_PARTIAL):
                     break

+            else:
+                raise RuntimeError("I2C read error: max retries reached.")

 
             # move data into buffer
             chunk = min(end - start, 60)
 
             # move data into buffer
             chunk = min(end - start, 60)


@@ -279,7 +301,7 @@ class MCP2221:
 
     # pylint: enable=too-many-arguments
 
 
     # pylint: enable=too-many-arguments
 

-    def i2c_configure(self, baudrate=100000):
+    def _i2c_configure(self, baudrate=100000):

         """Configure I2C"""
         self._hid_xfer(
             bytes(
         """Configure I2C"""
         self._hid_xfer(
             bytes(


@@ -310,7 +332,7 @@ class MCP2221:
         out_start=0,
         out_end=None,
         in_start=0,
         out_start=0,
         out_end=None,
         in_start=0,

-        in_end=None
+        in_end=None,

     ):
         """Write data from buffer_out to an address and then
         read data from an address and into buffer_in
     ):
         """Write data from buffer_out to an address and then
         read data from an address and into buffer_in