Add BeagleBone AI Support

[Adafruit_Blinka-hackapet.git] / src / adafruit_blinka / board / udoo_x86ultra.py

diff --git a/src/adafruit_blinka/board/udoo_x86ultra.py b/src/adafruit_blinka/board/udoo_x86ultra.py
index d0cb8f06b8413982301942265d240ad030a3060c..744d7744912b042aa480cc0d9e05cd8d310407d3 100644 (file)
--- a/src/adafruit_blinka/board/udoo_x86ultra.py
+++ b/src/adafruit_blinka/board/udoo_x86ultra.py
@@ -9,6 +9,11 @@ The other is based on the hardware manual:
 https://udoo.org/download/files/UDOO_X86/Doc/UDOO_X86II_MANUAL.pdf
 
 This will use the D system based on the diagram in the user guide
+
+i2c use i2c(board.I2C0_SCL, board_I2C0_SDA) or i2c(board.I2C1_SCL, board_I2C1_SDA)
+for the i2c(board.SCL, board.SCL) in the examples
+
+UART use pyserial not busio
 """
 
 from adafruit_blinka.microcontroller.pentium.n3710 import pin
@@ -58,8 +63,8 @@ UART1_TX = D18
 UART2_RX = D23
 UART2_TX = D22
 
-I2C0_SCL = D34 # labeled on diagram as I2C1, hardware manual port 0
-I2C0_SDA = D35 # i2cdetect-l lists it as i2c-0
+I2C0_SCL = D34  # labeled on diagram as I2C1, hardware manual port 0
+I2C0_SDA = D35  # i2cdetect-l lists it as i2c-0
 
-I2C1_SCL = D38 # Labeled on diagram as I2C2, hardware manual port 5
-I2C1_SCL = D39 # i2cdetect lists it as i2c-1
+I2C1_SCL = D38  # Labeled on diagram as I2C2, hardware manual port 5
+I2C1_SCL = D39  # i2cdetect lists it as i2c-1