import adafruit_platformdetect.constants.boards as ap_board
import adafruit_platformdetect.constants.chips as ap_chip
+
class I2C(Lockable):
def __init__(self, scl, sda, frequency=400000):
self.init(scl, sda, frequency)
self.deinit()
if detector.board.ftdi_ft232h:
from adafruit_blinka.microcontroller.ft232h.i2c import I2C
+
self._i2c = I2C(frequency=frequency)
return
elif detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.i2c import I2C
+
self._i2c = I2C(frequency=frequency)
return
elif detector.board.microchip_mcp2221:
from adafruit_blinka.microcontroller.mcp2221.i2c import I2C
+
self._i2c = I2C(frequency=frequency)
return
elif detector.board.any_embedded_linux:
else:
from machine import I2C as _I2C
from microcontroller.pin import i2cPorts
+
for portId, portScl, portSda in i2cPorts:
try:
if scl == portScl and sda == portSda:
pass
else:
raise ValueError(
- "No Hardware I2C on (scl,sda)={}\nValid I2C ports: {}".format((scl, sda), i2cPorts)
+ "No Hardware I2C on (scl,sda)={}\nValid I2C ports: {}".format(
+ (scl, sda), i2cPorts
+ )
)
self._lock = threading.RLock()
if end is None:
return self._i2c.writeto(address, memoryview(buffer)[start:], stop=stop)
else:
- return self._i2c.writeto(address, memoryview(buffer)[start:end], stop=stop)
+ return self._i2c.writeto(
+ address, memoryview(buffer)[start:end], stop=stop
+ )
return self._i2c.writeto(address, buffer, stop=stop)
- def writeto_then_readfrom(self, address, buffer_out, buffer_in, *, out_start=0, out_end=None, in_start=0, in_end=None, stop=False):
- return self._i2c.writeto_then_readfrom(address, buffer_out, buffer_in,
- out_start=out_start, out_end=out_end,
- in_start=in_start, in_end=in_end, stop=stop)
+ def writeto_then_readfrom(
+ self,
+ address,
+ buffer_out,
+ buffer_in,
+ *,
+ out_start=0,
+ out_end=None,
+ in_start=0,
+ in_end=None,
+ stop=False
+ ):
+ return self._i2c.writeto_then_readfrom(
+ address,
+ buffer_out,
+ buffer_in,
+ out_start=out_start,
+ out_end=out_end,
+ in_start=in_start,
+ in_end=in_end,
+ stop=stop,
+ )
+
class SPI(Lockable):
def __init__(self, clock, MOSI=None, MISO=None):
if detector.board.ftdi_ft232h:
from adafruit_blinka.microcontroller.ft232h.spi import SPI as _SPI
from adafruit_blinka.microcontroller.ft232h.pin import SCK, MOSI, MISO
+
self._spi = _SPI()
self._pins = (SCK, MOSI, MISO)
return
elif detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.spi import SPI as _SPI
from adafruit_blinka.microcontroller.nova.pin import SCK, MOSI, MISO
+
self._spi = _SPI(clock)
self._pins = (SCK, MOSI, MISO)
return
else:
from machine import SPI as _SPI
from microcontroller.pin import spiPorts
+
for portId, portSck, portMosi, portMiso in spiPorts:
- if ((clock == portSck) and # Clock is required!
- (MOSI == portMosi or MOSI == None) and # But can do with just output
- (MISO == portMiso or MISO == None)): # Or just input
+ if (
+ (clock == portSck)
+ and (MOSI == portMosi or MOSI == None) # Clock is required!
+ and (MISO == portMiso or MISO == None) # But can do with just output
+ ): # Or just input
self._spi = _SPI(portId)
self._pins = (portSck, portMosi, portMiso)
break
else:
raise ValueError(
- "No Hardware SPI on (SCLK, MOSI, MISO)={}\nValid SPI ports:{}".
- format((clock, MOSI, MISO), spiPorts))
+ "No Hardware SPI on (SCLK, MOSI, MISO)={}\nValid SPI ports:{}".format(
+ (clock, MOSI, MISO), spiPorts
+ )
+ )
def configure(self, baudrate=100000, polarity=0, phase=0, bits=8):
if detector.board.any_raspberry_pi or detector.board.any_raspberry_pi_40_pin:
elif detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.spi import SPI as _SPI
from adafruit_blinka.microcontroller.nova.pin import Pin
- elif board_id == ap_board.PINE64 or board_id == ap_board.PINEBOOK or board_id == ap_board.PINEPHONE:
+ elif (
+ board_id == ap_board.PINE64
+ or board_id == ap_board.PINEBOOK
+ or board_id == ap_board.PINEPHONE
+ ):
from adafruit_blinka.microcontroller.allwinner.a64.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.CLOCKWORK_CPI3:
firstbit=_SPI.MSB,
sck=Pin(self._pins[0].id),
mosi=Pin(self._pins[1].id),
- miso=Pin(self._pins[2].id)
+ miso=Pin(self._pins[2].id),
)
else:
raise RuntimeError("First call try_lock()")
try:
return self._spi.frequency
except AttributeError:
- raise NotImplementedError("Frequency attribute not implemented for this platform")
+ raise NotImplementedError(
+ "Frequency attribute not implemented for this platform"
+ )
def write(self, buf, start=0, end=None):
return self._spi.write(buf, start, end)
def readinto(self, buf, start=0, end=None, write_value=0):
return self._spi.readinto(buf, start, end, write_value=write_value)
- def write_readinto(self, buffer_out, buffer_in, out_start=0, out_end=None, in_start=0, in_end=None):
- return self._spi.write_readinto(buffer_out, buffer_in, out_start, out_end, in_start, in_end)
+ def write_readinto(
+ self, buffer_out, buffer_in, out_start=0, out_end=None, in_start=0, in_end=None
+ ):
+ return self._spi.write_readinto(
+ buffer_out, buffer_in, out_start, out_end, in_start, in_end
+ )
class UART(Lockable):
Parity.ODD = Parity()
Parity.EVEN = Parity()
- def __init__(self,
- tx,
- rx,
- baudrate=9600,
- bits=8,
- parity=None,
- stop=1,
- timeout=1000,
- receiver_buffer_size=64,
- flow=None):
+ def __init__(
+ self,
+ tx,
+ rx,
+ baudrate=9600,
+ bits=8,
+ parity=None,
+ stop=1,
+ timeout=1000,
+ receiver_buffer_size=64,
+ flow=None,
+ ):
if detector.board.any_embedded_linux:
- raise RuntimeError('busio.UART not supported on this platform. Please use pyserial instead.')
+ raise RuntimeError(
+ "busio.UART not supported on this platform. Please use pyserial instead."
+ )
elif detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.uart import UART as _UART
else:
if flow is not None: # default 0
raise NotImplementedError(
- "Parameter '{}' unsupported on {}".format(
- "flow", agnostic.board_id))
+ "Parameter '{}' unsupported on {}".format("flow", agnostic.board_id)
+ )
# translate parity flag for Micropython
if parity is UART.Parity.ODD:
parity=parity,
stop=stop,
timeout=timeout,
- read_buf_len=receiver_buffer_size
+ read_buf_len=receiver_buffer_size,
)
break
else:
raise ValueError(
- "No Hardware UART on (tx,rx)={}\nValid UART ports: {}".format((tx, rx), uartPorts)
+ "No Hardware UART on (tx,rx)={}\nValid UART ports: {}".format(
+ (tx, rx), uartPorts
+ )
)
def deinit(self):
projects / Adafruit_Blinka-hackapet.git / blobdiff