* Author(s): cefn
"""
-import threading
+try:
+ import threading
+except ImportError:
+ threading = None
import adafruit_platformdetect.constants.boards as ap_board
import adafruit_platformdetect.constants.chips as ap_chip
from adafruit_blinka.agnostic import board_id, detector
# pylint: disable=import-outside-toplevel,too-many-branches,too-many-statements
-# pylint: disable=too-many-arguments,too-many-function-args
+# pylint: disable=too-many-arguments,too-many-function-args,consider-using-with
class I2C(Lockable):
for both MicroPython and Linux.
"""
- def __init__(self, scl, sda, frequency=400000):
+ def __init__(self, scl, sda, frequency=100000):
self.init(scl, sda, frequency)
def init(self, scl, sda, frequency):
self._i2c = _I2C(frequency=frequency)
return
+ if detector.board.pico_u2if:
+ from adafruit_blinka.microcontroller.pico_u2if.i2c import I2C as _I2C
+
+ self._i2c = _I2C(scl, sda, frequency=frequency)
+ return
+ if detector.chip.id == ap_chip.RP2040:
+ from adafruit_blinka.microcontroller.rp2040.i2c import I2C as _I2C
+
+ self._i2c = _I2C(scl, sda, frequency=frequency)
+ return
if detector.board.any_embedded_linux:
from adafruit_blinka.microcontroller.generic_linux.i2c import I2C as _I2C
else:
- from machine import I2C as _I2C
+ from adafruit_blinka.microcontroller.generic_micropython.i2c import (
+ I2C as _I2C,
+ )
from microcontroller.pin import i2cPorts
for portId, portScl, portSda in i2cPorts:
try:
+ # pylint: disable=unexpected-keyword-arg
if scl == portScl and sda == portSda:
self._i2c = _I2C(portId, mode=_I2C.MASTER, baudrate=frequency)
break
+ # pylint: enable=unexpected-keyword-arg
except RuntimeError:
pass
else:
(scl, sda), i2cPorts
)
)
-
- self._lock = threading.RLock()
+ if threading is not None:
+ self._lock = threading.RLock()
def deinit(self):
"""Deinitialization"""
pass
def __enter__(self):
- self._lock.acquire()
+ if threading is not None:
+ self._lock.acquire()
return self
def __exit__(self, exc_type, exc_value, traceback):
- self._lock.release()
+ if threading is not None:
+ self._lock.release()
self.deinit()
def scan(self):
in_end=None,
stop=False
):
- """"Write to a device at specified address from a buffer then read
+ """ "Write to a device at specified address from a buffer then read
from a device at specified address into a buffer
"""
return self._i2c.writeto_then_readfrom(
self._spi = _SPI()
self._pins = (SCK, MOSI, MISO)
return
+ if detector.board.pico_u2if:
+ from adafruit_blinka.microcontroller.pico_u2if.spi import SPI as _SPI
+
+ self._spi = _SPI(clock) # this is really all that's needed
+ self._pins = (clock, clock, clock) # will determine MOSI/MISO from clock
+ return
+ if detector.chip.id == ap_chip.RP2040:
+ from adafruit_blinka.microcontroller.rp2040.spi import SPI as _SPI
+
+ self._spi = _SPI(clock, MOSI, MISO) # Pins configured on instantiation
+ self._pins = (clock, clock, clock) # These don't matter, they're discarded
+ return
if detector.board.any_embedded_linux:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
else:
- from machine import SPI as _SPI
+ from adafruit_blinka.microcontroller.generic_micropython.spi import (
+ SPI as _SPI,
+ )
from microcontroller.pin import spiPorts
for portId, portSck, portMosi, portMiso in spiPorts:
def configure(self, baudrate=100000, polarity=0, phase=0, bits=8):
"""Update the configuration"""
if detector.board.any_raspberry_pi or detector.board.any_raspberry_pi_40_pin:
- from adafruit_blinka.microcontroller.bcm283x.pin import Pin
+ from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+ elif detector.board.BEAGLEBONE_AI:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif detector.board.any_beaglebone:
- from adafruit_blinka.microcontroller.am335x.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- elif detector.board.any_orange_pi and detector.chip.id == ap_chip.SUN8I:
- from adafruit_blinka.microcontroller.allwinner.h3.pin import Pin
+ elif detector.board.any_orange_pi:
+ from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+ elif detector.board.any_nanopi and detector.chip.id == ap_chip.SUN8I:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.GIANT_BOARD:
- from adafruit_blinka.microcontroller.sama5.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.CORAL_EDGE_TPU_DEV:
- from adafruit_blinka.microcontroller.nxp_imx8m.pin import Pin
+ from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+ elif board_id == ap_board.CORAL_EDGE_TPU_DEV_MINI:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.ODROID_C2:
- from adafruit_blinka.microcontroller.amlogic.s905.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.ODROID_C4:
- from adafruit_blinka.microcontroller.amlogic.s905x3.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.ODROID_XU4:
- from adafruit_blinka.microcontroller.samsung.exynos5422.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.DRAGONBOARD_410C:
- from adafruit_blinka.microcontroller.snapdragon.apq8016.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.JETSON_NANO:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.tegra.t210.pin import Pin
elif board_id == ap_board.JETSON_TX1:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.tegra.t210.pin import Pin
elif board_id == ap_board.JETSON_TX2:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.tegra.t186.pin import Pin
elif board_id == ap_board.JETSON_XAVIER:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.tegra.t194.pin import Pin
elif board_id == ap_board.JETSON_NX:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.tegra.t194.pin import Pin
elif detector.board.ROCK_PI_S:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.rockchip.rk3308.pin import Pin
+ elif detector.board.ROCK_PI_4:
+ from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif detector.board.SIFIVE_UNLEASHED:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.hfu540.pin import Pin
elif detector.board.ftdi_ft232h:
from adafruit_blinka.microcontroller.ft232h.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.ft232h.pin import Pin
elif detector.board.binho_nova:
from adafruit_blinka.microcontroller.nova.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.nova.pin import Pin
elif detector.board.greatfet_one:
from adafruit_blinka.microcontroller.nxp_lpc4330.spi import SPI as _SPI
- from adafruit_blinka.microcontroller.nxp_lpc4330.pin import Pin
- elif board_id in (ap_board.PINE64, ap_board.PINEBOOK, ap_board.PINEPHONE):
- from adafruit_blinka.microcontroller.allwinner.a64.pin import Pin
+ elif board_id in (
+ ap_board.PINE64,
+ ap_board.PINEBOOK,
+ ap_board.PINEPHONE,
+ ap_board.SOPINE,
+ ):
+ from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+ elif board_id == ap_board.PINEH64:
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.CLOCKWORK_CPI3:
- from adafruit_blinka.microcontroller.allwinner.a33.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
elif board_id == ap_board.ONION_OMEGA2:
- from adafruit_blinka.microcontroller.mips24kec.pin import Pin
from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+ elif detector.board.any_lubancat and detector.chip.id == ap_chip.IMX6ULL:
+ from adafruit_blinka.microcontroller.generic_linux.spi import SPI as _SPI
+ elif detector.board.pico_u2if:
+ from adafruit_blinka.microcontroller.pico_u2if.spi import SPI as _SPI
+ elif detector.chip.id == ap_chip.RP2040:
+ from adafruit_blinka.microcontroller.rp2040.spi import SPI as _SPI
else:
- from machine import SPI as _SPI
- from machine import Pin
+ from adafruit_blinka.microcontroller.generic_micropython.spi import (
+ SPI as _SPI,
+ )
if self._locked:
# TODO check if #init ignores MOSI=None rather than unsetting, to save _pinIds attribute
phase=phase,
bits=bits,
firstbit=_SPI.MSB,
- sck=Pin(self._pins[0].id),
- mosi=Pin(self._pins[1].id),
- miso=Pin(self._pins[2].id),
)
else:
raise RuntimeError("First call try_lock()")
except AttributeError:
raise NotImplementedError(
"Frequency attribute not implemented for this platform"
- )
+ ) from AttributeError
def write(self, buf, start=0, end=None):
"""Write to the SPI device"""
from adafruit_blinka.microcontroller.nova.uart import UART as _UART
elif detector.board.greatfet_one:
from adafruit_blinka.microcontroller.nxp_lpc4330.uart import UART as _UART
+ elif detector.chip.id == ap_chip.RP2040:
+ from adafruit_blinka.microcontroller.rp2040.uart import UART as _UART
else:
from machine import UART as _UART
- if detector.board.binho_nova:
- from adafruit_blinka.microcontroller.nova.pin import uartPorts
- else:
- from microcontroller.pin import uartPorts
+ from microcontroller.pin import uartPorts
self.baudrate = baudrate
else:
raise ValueError("Invalid parity")
- # check tx and rx have hardware support
- for portId, portTx, portRx in uartPorts: #
- if portTx == tx and portRx == rx:
- self._uart = _UART(
- portId,
- baudrate,
- bits=bits,
- parity=parity,
- stop=stop,
- timeout=timeout,
- read_buf_len=receiver_buffer_size,
- )
- break
+ if detector.chip.id == ap_chip.RP2040:
+ self._uart = _UART(
+ tx,
+ rx,
+ baudrate=baudrate,
+ bits=bits,
+ parity=parity,
+ stop=stop,
+ )
else:
- raise ValueError(
- "No Hardware UART on (tx,rx)={}\nValid UART ports: {}".format(
- (tx, rx), uartPorts
+ # check tx and rx have hardware support
+ for portId, portTx, portRx in uartPorts: #
+ if portTx == tx and portRx == rx:
+ self._uart = _UART(
+ portId,
+ baudrate,
+ bits=bits,
+ parity=parity,
+ stop=stop,
+ timeout=timeout,
+ read_buf_len=receiver_buffer_size,
+ )
+ break
+ else:
+ raise ValueError(
+ "No Hardware UART on (tx,rx)={}\nValid UART ports: {}".format(
+ (tx, rx), uartPorts
+ )
)
- )
def deinit(self):
"""Deinitialization"""
def write(self, buf):
"""Write to the UART from a buffer"""
return self._uart.write(buf)
+
+
+class OneWire:
+ """
+ Stub class for OneWire, which is currently not implemented
+ """
+
+ def __init__(self, pin):
+ raise NotImplementedError("OneWire has not been implemented")
+
+ def deinit(self):
+ """
+ Deinitialize the OneWire bus and release any hardware resources for reuse.
+ """
+ raise NotImplementedError("OneWire has not been implemented")
+
+ def reset(self):
+ """
+ Reset the OneWire bus and read presence
+ """
+ raise NotImplementedError("OneWire has not been implemented")
+
+ def read_bit(self):
+ """
+ Read in a bit
+ """
+ raise NotImplementedError("OneWire has not been implemented")
+
+ def write_bit(self, value):
+ """
+ Write out a bit based on value.
+ """
+ raise NotImplementedError("OneWire has not been implemented")
projects / Adafruit_Blinka-hackapet.git / blobdiff