-This repository is structured around integration tests found in the python/testing
-directory. The tests offer a procedural way to assert equivalence between 'native' CircuitPython (CP) behaviour and
-behaviour of the MicropythonCircuitPython (MCP) layer.
+This repository is structured around integration tests rooted at the `test/src`
+directory, intended to test the compatibility layer rooted in `src`.
+The tests offer a procedural way to assert equivalence between 'native' CircuitPython behaviour and behaviour of the **adafruit_blinka** compatibility layer.
-In particular, automated introspection of the python runtime combines with interactive prompts
-to configure a scenario for testing (e.g. which platform, which board, what is wired to it) meaning that
-the same routines can be carried out on Micropython boards, dual boards running either CP or MCP
-or dedicated CP boards.
+The structure of the testing modules permits test suites to be imported and configured selectively on different implementations, platforms and boards (see `adafruit_blinka.agnostic.py` for definitions of these terms).
-From a project-management point of view, tests can provide a strictly-interpreted way to
-communicate missing features, also providing the implicit means of verifying that intended
-features for the MCP layer are in fact already served from the CP layer.
+Automated introspection of the python runtime combines with interactive prompts
+to configure a scenario for testing (e.g. which platform, which board, what is wired to it)
+so the same routines can be carried out on Micropython boards, dual boards running either CircuitPython or Micropython, or dedicated CircuitPython boards.
-# Example
-
-To take a minimal example, the following asserts the default behaviour of the DigitalInOut
-constructor, checks the behaviour of switch_to_input/output(), configures a pin as a pull-up button, a pull-down button and an LED.
+Typically the tests have first run on a native CircuitPython platform, and are then used to
+prove equivalence on a Micropython platform running the **adafruit_blinka** compatibility layer.
-```python
-import testing
-testing.main()
-```
-
-## Comments
+Tests of compatible versions of **digitalio**, **board** and **microcontroller** have successfully demonstrated
+the same code running on either platform, setting and getting pin values and using pull.
-There are routines in the top level of the repo like `upload_feather_m0_watch.py` which selectively synchronize files it with the CIRCUITPY or PYBFLASH folder for stm32 and samd21 (with a file-watching behaviour for edits), or which execute a selective ampy upload for CircuitPython/Micropython on esp8266.
+Tests have also proven compatibility of the following unmodified CircuitPython libraries...
-Given the limited memory available, on the Feather M0 Express, running the test case requires that
-the [micropython-lib unittest library](https://github.com/micropython/micropython-lib/blob/master/unittest/unittest.py)
-is distributed as a compatible Micropython bytecode .mpy file
-pre-compiled under an mpy-cross version from the CircuitPython 2.2.3-tagged repository. Otherwise
-simply loading the unittest module already busts the available memory.
+* adafruit_bme280
+* adafruit_mma8451
+* adafruit_gps
-# Test Suite Structure
+...which proves the fundamentals of bitbangio.I2C, busio.I2C and busio.UART
-The structure of the testing modules is as follows, to permit test suites to be imported selectively
-on different implementations, platforms and boards (see agnostic.py for definitions of these terms)...
-
-* _testing_ - common function definitions for suite-execution
-* _testing.mcp_ - test suite for hardware-agnostic elements of MCP layer (e.g. Enum)
-* _testing.implementation_ - calculates implementation-specific parameters for test fixtures
-* _testing.implementation.all_ - suites expected to run on all platforms
-* _testing.implementation.micropython_ - suites testing MCP-specific classes and behaviours (under the hood of the hardware compatibility layer) and only
-expected to run on Micropython
-* _testing.implementation.circuitpython - suites testing CircuitPython-specific
-classes and behaviours, and only expected to run in CircuitPython_
+# Example
-e.g.
-* testing.implementation.all.digitalio - tests against the
-digitalio module regardless of platform
-* testing.implementation.circuitpython.digitalio - tests of digitalio against a
-native circuitpython host
-* testing.implementation.micropython.digitalio - tests of digitalio against the MCP
-compatibility layer
+To take a minimal example, the following should assert the default behaviour of the DigitalInOut
+constructor, checks the behaviour of switch_to_input/output(), configures a pin as a pull-up button, a pull-down button and an LED.
+```python
+from testing import test_module_name
+test_module_name("testing.universal.digitalio")
+```
-# Next Steps
+## Comments
-To be able to run a substantial series of testing modules, a dedicated
-feather m0 express firmware image should be prepared with [frozen modules](https://learn.adafruit.com/micropython-for-samd21/frozen-modules) which
-minimises overhead by holding test definitions in flash instead of RAM.
+There are reference routines in `test/scripts` like `upload_feather_huzzah_micropython_put.sh` which execute a selective bytecode-compile to .mpy format and an ampy upload for CircuitPython/Micropython on esp8266, or `upload_pyboard_micropython_cp.sh` which selectively bytecode-compiles and synchronizes files with cp to the CIRCUITPY or PYBFLASH disk mount for stm32 and samd21 platforms.
\ No newline at end of file
projects / Adafruit_Blinka-hackapet.git / blobdiff