Merge branch 'adafruit:main' into Support_for_Orange_Pi_Zero2W

[Adafruit_Blinka-hackapet.git] / src / adafruit_blinka / microcontroller / allwinner / h616 / pin.py

diff --git a/src/adafruit_blinka/microcontroller/allwinner/h616/pin.py b/src/adafruit_blinka/microcontroller/allwinner/h616/pin.py
index e1265191b956e547335f70f979c48f4231fd7932..11855b77f971fce605f371e60b3e70815a476472 100644 (file)
--- a/src/adafruit_blinka/microcontroller/allwinner/h616/pin.py
+++ b/src/adafruit_blinka/microcontroller/allwinner/h616/pin.py
@@ -1,6 +1,7 @@
 # SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
 #
 # SPDX-License-Identifier: MIT
 # SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
 #
 # SPDX-License-Identifier: MIT

+

 """Allwinner H616 Pin Names"""
 from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
 
 """Allwinner H616 Pin Names"""
 from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
 


@@ -9,8 +10,6 @@ with open("/sys/class/gpio/gpiochip0/label", "r") as f:
     label = f.read().strip()
     if label == "300b000.pinctrl":
         __chip_num = 0
     label = f.read().strip()
     if label == "300b000.pinctrl":
         __chip_num = 0

-
-

 PC0 = Pin((__chip_num, 64))
 SPI0_SCLK = PC0
 PC1 = Pin((__chip_num, 65))
 PC0 = Pin((__chip_num, 64))
 SPI0_SCLK = PC0
 PC1 = Pin((__chip_num, 65))


@@ -108,13 +107,20 @@ PI14 = Pin((__chip_num, 270))
 PI15 = Pin((__chip_num, 271))
 PI16 = Pin((__chip_num, 272))
 
 PI15 = Pin((__chip_num, 271))
 PI16 = Pin((__chip_num, 272))
 

-i2cPorts = ((0, TWI0_SCL,TWI0_SDA),(1, TWI1_SCL, TWI1_SDA),(2, TWI2_SCL, TWI2_SDA),(3, TWI3_SCL, TWI3_SDA),)
+i2cPorts = (
+    (0, TWI0_SCL, TWI0_SDA),
+    (1, TWI1_SCL, TWI1_SDA),
+    (2, TWI2_SCL, TWI2_SDA),
+    (3, TWI3_SCL, TWI3_SDA),
+)

 # ordered as spiId, sckId, mosiId, misoId
 # ordered as spiId, sckId, mosiId, misoId

+

 spiPorts = (
     (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
     (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),
 )
 # ordered as uartId, txId, rxId
 spiPorts = (
     (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
     (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),
 )
 # ordered as uartId, txId, rxId

+

 uartPorts = (
     (2, UART2_TX, UART2_RX),
     (5, UART5_TX, UART5_RX),
 uartPorts = (
     (2, UART2_TX, UART2_RX),
     (5, UART5_TX, UART5_RX),