Updated chip definitions

[Adafruit_Blinka-hackapet.git] / src / adafruit_blinka / microcontroller / tegra / t186 / pin.py

diff --git a/src/adafruit_blinka/microcontroller/tegra/t186/pin.py b/src/adafruit_blinka/microcontroller/tegra/t186/pin.py
new file mode 100644 (file)
index 0000000..3268f34
--- /dev/null
+++ b/src/adafruit_blinka/microcontroller/tegra/t186/pin.py
@@ -0,0 +1,114 @@
+import sys
+import atexit
+sys.path.append("/opt/nvidia/jetson-gpio/lib/python")
+sys.path.append("/opt/nvidia/jetson-gpio/lib/python/Jetson/GPIO")
+import Jetson.GPIO as GPIO
+GPIO.setmode(GPIO.TEGRA_SOC)
+GPIO.setwarnings(False)   # shh!
+
+# Pins dont exist in CPython so...lets make our own!
+class Pin:
+    IN = 0
+    OUT = 1
+    LOW = 0
+    HIGH = 1
+    PULL_NONE = 0
+    PULL_UP = 1
+    PULL_DOWN = 2
+
+    id = None
+    _value = LOW
+    _mode = IN
+
+    def __init__(self, bcm_number):
+        self.id = bcm_number
+
+    def __repr__(self):
+        return str(self.id)
+
+    def __eq__(self, other):
+        return self.id == other
+
+    def init(self, mode=IN, pull=None):
+        if mode != None:
+            if mode == self.IN:
+                self._mode = self.IN
+                GPIO.setup(self.id, GPIO.IN)
+            elif mode == self.OUT:
+                self._mode = self.OUT
+                GPIO.setup(self.id, GPIO.OUT)
+            else:
+                raise RuntimeError("Invalid mode for pin: %s" % self.id)
+        if pull != None:
+            if self._mode != self.IN:
+                raise RuntimeError("Cannot set pull resistor on output")
+            if pull == self.PULL_UP:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+            elif pull == self.PULL_DOWN:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+            else:
+                raise RuntimeError("Invalid pull for pin: %s" % self.id)
+
+    def value(self, val=None):
+        if val != None:
+            if val == self.LOW:
+                self._value = val
+                GPIO.output(self.id, val)
+            elif val == self.HIGH:
+                self._value = val
+                GPIO.output(self.id, val)
+            else:
+                raise RuntimeError("Invalid value for pin")
+        else:
+            return GPIO.input(self.id)
+
+    @atexit.register
+    def cleanup():
+        print("Exiting... \nCleaning up pins")
+        GPIO.cleanup()
+
+# Cannot be used as GPIO
+SDA = Pin('GPIO_SEN9')
+SCL = Pin('GPIO_SEN8')
+SDA_1 = Pin('GEN1_I2C_SDA')
+SCL_1 = Pin('GEN1_I2C_SCL')
+
+J04 = Pin('AUD_MCLK')
+J06 = Pin('GPIO_AUD1')
+AA02 = Pin('CAN_GPIO2')
+N06 = Pin('GPIO_CAM7')
+N04 = Pin('GPIO_CAM5')
+N05 = Pin('GPIO_CAM6')
+N03 = Pin('GPIO_CAM4')
+AA01 = Pin('CAN_GPIO1')
+I05 = Pin('GPIO_PQ5')
+T03 = Pin('UART1_CTS')
+T02 = Pin('UART1_RTS')
+J00 = Pin('DAP1_SCLK')
+J03 = Pin('DAP1_FS')
+J02 = Pin('DAP1_DIN')
+J01 = Pin('DAP1_DOUT')
+P17 = Pin('GPIO_EXP_P17')
+AA00 = Pin('CAN0_GPIO0')
+Y01 = Pin('GPIO_MDM2')
+P16 = Pin('GPIO_EXP_P16')
+I04 = Pin('GPIO_PQ4')
+J05 = Pin('GPIO_AUD0')
+
+i2cPorts = (
+    (1, SCL, SDA), (0, SCL_1, SDA_1),
+)
+
+
+
+
+
+
+
+
+
+
+
+
+
+