Add & Remove spaces to clean the syntax

[Adafruit_Blinka-hackapet.git] / examples / mcps_busio_i2c.py

diff --git a/examples/mcps_busio_i2c.py b/examples/mcps_busio_i2c.py
old mode 100644 (file)
new mode 100755 (executable)
index f3b4eea..2059354
--- a/examples/mcps_busio_i2c.py
+++ b/examples/mcps_busio_i2c.py
@@ -1,30 +1,57 @@
 import time
-import sys
-import board
 import busio
+import hid
 
-print("hello blinka!")
+from adafruit_blinka.microcontroller.mcp2221.mcp2221 import mcp2221 as _mcp2221
+from adafruit_blinka.microcontroller.mcp2221.mcp2221 import MCP2221 as _MCP2221
+from adafruit_blinka.microcontroller.mcp2221.i2c import I2C as _MCP2221I2C
 
-i2c = busio.I2C(board.SCL, board.SDA)
+MLXADDR = 0x33
+ADDRID1 = 0x2407
 
-print("I2C devices found: ", [hex(i) for i in i2c.scan()])
 
-if not 0x18 in i2c.scan():
-    print("Didn't find MCP9808")
-    sys.exit()
+class MCP2221(_MCP2221):
+    def __init__(self, address):
+        self._hid = hid.device()
+        self._hid.open_path(address)
+        print("Connected to " + str(address))
+        self._gp_config = [0x07] * 4  # "don't care" initial value
+        for pin in range(4):
+            self.gp_set_mode(pin, self.GP_GPIO)  # set to GPIO mode
+            self.gpio_set_direction(pin, 1)  # set to INPUT
 
 
-def temp_c(data):
-    value = data[0] << 8 | data[1]
-    temp = (value & 0xFFF) / 16.0
-    if value & 0x1000:
-        temp -= 256.0
-    return temp
+class MCP2221I2C(_MCP2221I2C):
+    def __init__(self, mcp2221, *, frequency=100000):
+        self._mcp2221 = mcp2221
+        self._mcp2221.i2c_configure(frequency)
+
+
+class I2C(busio.I2C):
+    def __init__(self, mcp2221_i2c):
+        self._i2c = mcp2221_i2c
+
+
+addresses = [mcp["path"] for mcp in hid.enumerate(0x04D8, 0x00DD)]
+
+i2c_devices = []
+i2c_devices.append(I2C(MCP2221I2C(_mcp2221)))
+
+for addr in addresses:
+    try:
+        i2c_device = I2C(MCP2221I2C(MCP2221(addr)))
+        i2c_devices.append(i2c_device)
+    except OSError:
+        print("Device path: " + str(addr) + " is used")
 
 
 while True:
-    i2c.writeto(0x18, bytes([0x05]), stop=False)
-    result = bytearray(2)
-    i2c.readfrom_into(0x18, result)
-    print(temp_c(result))
-    time.sleep(0.5)
+    for i2c in i2c_devices:
+        addrbuf = bytearray(2)
+        addrbuf[0] = ADDRID1 >> 8
+        addrbuf[1] = ADDRID1 & 0xFF
+        inbuf = bytearray(6)
+        i2c.writeto_then_readfrom(MLXADDR, addrbuf, inbuf)
+        print("Device " + str(i2c_devices.index(i2c)) + ": ")
+        print(inbuf)
+        time.sleep(0.5)