add missing __init__.py to Linksprite/Pcduino boards

[Adafruit_Blinka-hackapet.git] / src / microcontroller / pin.py

diff --git a/src/microcontroller/pin.py b/src/microcontroller/pin.py
old mode 100755 (executable)
new mode 100644 (file)
index 4c828df..ab96c7b
--- a/src/microcontroller/pin.py
+++ b/src/microcontroller/pin.py
@@ -31,6 +31,8 @@ elif chip_id == ap_chip.AM33XX:
     from adafruit_blinka.microcontroller.am335x.pin import *
 elif chip_id == ap_chip.JH71x0:
     from adafruit_blinka.microcontroller.starfive.JH71x0.pin import *
     from adafruit_blinka.microcontroller.am335x.pin import *
 elif chip_id == ap_chip.JH71x0:
     from adafruit_blinka.microcontroller.starfive.JH71x0.pin import *

+elif chip_id == ap_chip.SUN4I:
+    from adafruit_blinka.microcontroller.allwinner.a10.pin import *

 elif chip_id == ap_chip.SUN8I:
     from adafruit_blinka.microcontroller.allwinner.h3.pin import *
 elif chip_id == ap_chip.H3:
 elif chip_id == ap_chip.SUN8I:
     from adafruit_blinka.microcontroller.allwinner.h3.pin import *
 elif chip_id == ap_chip.H3:


@@ -55,6 +57,8 @@ elif chip_id == ap_chip.S905X3:
     from adafruit_blinka.microcontroller.amlogic.s905x3.pin import *
 elif chip_id == ap_chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import *
     from adafruit_blinka.microcontroller.amlogic.s905x3.pin import *
 elif chip_id == ap_chip.S922X:
     from adafruit_blinka.microcontroller.amlogic.s922x.pin import *

+elif chip_id == ap_chip.A311D:
+    from adafruit_blinka.microcontroller.amlogic.a311d.pin import *

 elif chip_id == ap_chip.EXYNOS5422:
     from adafruit_blinka.microcontroller.samsung.exynos5422.pin import *
 elif chip_id == ap_chip.APQ8016:
 elif chip_id == ap_chip.EXYNOS5422:
     from adafruit_blinka.microcontroller.samsung.exynos5422.pin import *
 elif chip_id == ap_chip.APQ8016:


@@ -75,6 +79,8 @@ elif chip_id == ap_chip.LPC4330:
     from adafruit_blinka.microcontroller.nxp_lpc4330.pin import *
 elif chip_id == ap_chip.MCP2221:
     from adafruit_blinka.microcontroller.mcp2221.pin import *
     from adafruit_blinka.microcontroller.nxp_lpc4330.pin import *
 elif chip_id == ap_chip.MCP2221:
     from adafruit_blinka.microcontroller.mcp2221.pin import *

+elif chip_id == ap_chip.A10:
+    from adafruit_blinka.microcontroller.allwinner.a10.pin import *

 elif chip_id == ap_chip.A64:
     from adafruit_blinka.microcontroller.allwinner.a64.pin import *
 elif chip_id == ap_chip.A33:
 elif chip_id == ap_chip.A64:
     from adafruit_blinka.microcontroller.allwinner.a64.pin import *
 elif chip_id == ap_chip.A33:


@@ -98,6 +104,7 @@ elif chip_id == ap_chip.MT8167:
 elif chip_id == ap_chip.RP2040_U2IF:
     from adafruit_blinka.microcontroller.rp2040_u2if.pin import *
 elif "sphinx" in sys.modules:
 elif chip_id == ap_chip.RP2040_U2IF:
     from adafruit_blinka.microcontroller.rp2040_u2if.pin import *
 elif "sphinx" in sys.modules:

-    pass
+    # pylint: disable=unused-import
+    from adafruit_blinka.microcontroller.generic_micropython import Pin

 else:
     raise NotImplementedError("Microcontroller not supported: ", chip_id)
 else:
     raise NotImplementedError("Microcontroller not supported: ", chip_id)