Move (unimplemented) OneWire from busio to onewireio

[Adafruit_Blinka-hackapet.git] / src / busio.py

diff --git a/src/busio.py b/src/busio.py
old mode 100755 (executable)
new mode 100644 (file)
index 46d0f9b..dd748a5
--- a/src/busio.py
+++ b/src/busio.py
@@ -1,3 +1,6 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
 """
 `busio` - Bus protocol support like I2C and SPI
 =================================================
@@ -76,6 +79,13 @@ class I2C(Lockable):
                 I2C_ItsyBitsy as _I2C,
             )
 
+            self._i2c = _I2C(scl, sda, frequency=frequency)
+            return
+        if detector.board.macropad_u2if:
+            from adafruit_blinka.microcontroller.rp2040_u2if.i2c import (
+                I2C_MacroPad as _I2C,
+            )
+
             self._i2c = _I2C(scl, sda, frequency=frequency)
             return
         if detector.board.qt2040_trinkey_u2if:
@@ -237,6 +247,14 @@ class SPI(Lockable):
                 SPI_ItsyBitsy as _SPI,
             )
 
+            self._spi = _SPI(clock)  # this is really all that's needed
+            self._pins = (clock, clock, clock)  # will determine MOSI/MISO from clock
+            return
+        if detector.board.macropad_u2if:
+            from adafruit_blinka.microcontroller.rp2040_u2if.spi import (
+                SPI_MacroPad as _SPI,
+            )
+
             self._spi = _SPI(clock)  # this is really all that's needed
             self._pins = (clock, clock, clock)  # will determine MOSI/MISO from clock
             return
@@ -306,6 +324,10 @@ class SPI(Lockable):
             from adafruit_blinka.microcontroller.rp2040_u2if.spi import (
                 SPI_ItsyBitsy as _SPI,
             )
+        elif detector.board.macropad_u2if:
+            from adafruit_blinka.microcontroller.rp2040_u2if.spi import (
+                SPI_MacroPad as _SPI,
+            )
         elif detector.board.qtpy_u2if:
             from adafruit_blinka.microcontroller.rp2040_u2if.spi import SPI_QTPY as _SPI
         elif detector.chip.id == ap_chip.RP2040:
@@ -470,36 +492,3 @@ class UART(Lockable):
     def write(self, buf):
         """Write to the UART from a buffer"""
         return self._uart.write(buf)
-
-
-class OneWire:
-    """
-    Stub class for OneWire, which is currently not implemented
-    """
-
-    def __init__(self, pin):
-        raise NotImplementedError("OneWire has not been implemented")
-
-    def deinit(self):
-        """
-        Deinitialize the OneWire bus and release any hardware resources for reuse.
-        """
-        raise NotImplementedError("OneWire has not been implemented")
-
-    def reset(self):
-        """
-        Reset the OneWire bus and read presence
-        """
-        raise NotImplementedError("OneWire has not been implemented")
-
-    def read_bit(self):
-        """
-        Read in a bit
-        """
-        raise NotImplementedError("OneWire has not been implemented")
-
-    def write_bit(self, value):
-        """
-        Write out a bit based on value.
-        """
-        raise NotImplementedError("OneWire has not been implemented")