"""Pentium N3710 (Braswell core SOC) pin names"""
from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin

# gpiochip3
GPIO_243 = Pin((3,15))
GPIO_246 = Pin((3,18))
GPIO_247 = Pin((3,19))
GPIO_249 = Pin((3,21))
GPIO_250 = Pin((3,22))
GPIO_253 = Pin((3,25))
GPIO_273 = Pin((3,45))
GPIO_275 = Pin((3,47))
GPIO_276 = Pin((3,48))
GPIO_278 = Pin((3,50))
GPIO_279 = Pin((3,51))
GPIO_280 = Pin((3,52))
GPIO_307 = Pin((3,79))

sdmmc2_D3 = GPIO_243 # SDIO_D3 on diagram
sdmmc2_D1 = GPIO_246
sdmmc2_CLK = GPIO_247
sdmmc2_D2 = GPIO_249
sdmmc2_CMD = GPIO_250
sdmmc2_D0 = GPIO_253

MF_LPC_AD2 = GPIO_273
MF_LPC_AD0 = GPIO_275
LPC_FRAMEB = GPIO_276
MF_LPC_AD3 = GPIO_278
MF_LPC_CLKOUT0 = GPIO_279
MF_LPC_AD1 = GPIO_280
ILB_SERIRQ = GPIO_307

# ggpiochip1
GPIO_358 = Pin((1,17))
GPIO_SUS3 = SDIO_WAKE = GPIO_358


# gpiochip0
GPIO_490 = Pin((0,76))
GPIO_492 = Pin((0,78))

SATA_GP1 = TS_INT = GPIO_490
SATA_GP@ = TS_RST = GPIO_492


# not general gpio on chip 0
# uarts

UART1_RXD = Pin((0,16))
UART1_TXD = Pin((0,20))
UART1_RTS = Pin((0,15))
UART1_CTS = Pin((0,18))

UART2_RXD = Pin((0,17))
UART2_TXD = Pin((0,21))
UART2_RTS = Pin((0,19))
UART2_CTS = Pin((0,22))

GPIO_429 = UART1_RTS
GPIO_430 = UART1_RXD
GPIO_431 = UART2_RXD
GPIO_432 = UART1_CTS
GPIO_434 = UART1_TXD
GPIO_435 = UART2_TXD
GPIO_436 = UART2_CTS 

#i2c 
I2C0_SDA = Pin((0,61))
I2C0_SCL = Pin((0,65))

I2C1_SDA = TS_I2C_SDA = Pin((0,45)) # listed as port 5 on hardware manual
I2C1_SCL = TS_I2C_SCL = Pin((0,48))


GPIO_469 = I2C5_SDA #I2C2 on diagram
GPIO_472 = I2C5_SCL 
GPIO_475 = I2C0_SDA #I2C1 on diagram
GPIO_479 = I2C0_SCL

i2cPorts = (
    (0, I2C0_SCL, I2C0_SDA),
    (1, I2C1_SCL, I2C1_SDA),
)

# ordered as uartId, txId, rxId
uartPorts = (
    (1, UART1_TXD, UART1_RXD),
    (2, UART2_TXD, UART2_RXD),